論文專著：

出版專著：

[1] 主編《鋼鐵冶金的環保與節能》，李光強、朱誠意，（2006，2010冶金工業出版社）。

[2] 參編《鈦微合金鋼》（2016年冶金工業出版社，毛新平主編,李光強編寫第二章“鈦微合金化的化學冶金原理”）。

[3] 參編《Titanium Microalloyed Steel: Fundamentals, Technology, and Products》，（毛新平主編，李光強編寫第二章：“Principles of Chemical Metallurgy of Titanium Microalloyed Steel”, Jointly published by Springer and Metallurgical Industry Press, 2019） 

發表論文：

[1]Tian, Yu-feng; Li, Guang-qiang; Li, Yong-qian; Liu, Yu*.Comparison study on hot state modification of converter slag by adding Al₂O₃ or SiO₂.Journal of Iron and Steel Research International, 2024.

[2]Wang, Qiang; Liu, Chang; Cheng, Gong; Cheng, Changgui; He, Zhu; Li, Guangqiang*.Numerical Understanding of Electromagnetic Influence on Fluctuation Behavior at Slag/Steel Interface During LF Refining Process.Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2024, 55(1): 626-636.

[3]Tan, Chong; Li, Guangqiang; Liu, Chang; Xiao, Aida; He, Zhu; Wang, Qiang*.Understanding of baffle effect of inserting a filter within a tundish via a water model experiment and numerical simulation.Metallurgical Research and Technology, 2024, 121(1): 109.

[4]Chen Zhe; Yan Wen; Li Guangqiang; Hong Shaosong; Li Nan.Enhanced mechanical properties of novel Al₂O₃-based ceramic filter by using microporous corundum-spinel and nano-Al₂O₃ powders.Journal of the European Ceramic Society, 2024, 44(2).

[5]Hu, Chengyang; He, Chengjie; Zhu, Xiaoxiong; Dong, Hangyu; Wan, Xiangliang; Li, Guangqiang; Wu, Kaiming.The significant role of bimodal lamellar heterostructure for Lüders deformation and TRIP effect in 18Cr–8Ni austenitic stainless steel.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2023, 887: 145748.

[6]Zhang, Wenwen; Zheng, Wan*; Li, Guangqiang; Yan, Zirui; Yan, Wen; Liang, Zhenjiang; Liu, Peng。Removal behavior of Al-Ti-O inclusions in aluminum deoxidized molten steel containing titanium by microporous magnesium foam ceramic filters.Journal of Materials Research and Technology-JMR&T, 2023, 27: 4503-4512.

[7]Luo, Zigui; Yang, Zhenjia; Jiang, Shangwei; Wu, Wei; Li, Guangqiang; Fan, Xi'an*.High-performance Fe-Si soft magnetic composites with controllable silicate/nano-Fe composite coating.Journal of Materials Research and Technology-JMR&T, 2023, 27: 6264-6274.

[8]Liu, Ying; Yan, Wen*; Liu, Yu; Wang, Qiang; Li, Guangqiang; Li, Nan.Effect of α-Al₂O₃ content on microstructures, mechanical properties and purification efficiency on molten steel of MgO-based filters.Journal of the European Ceramic Society, 2023, 43(14): 6516-6526.

[9]Liu, Xiuyi; Chen, Zhe*; Yan, Wen*; Wang, Jingran; Ma, Sanbao; Li, Guangqiang.A comparative study on lightweight and dense periclase-magnesium aluminate spinel refractories from industrial preparation.Journal of Alloys and Compounds, 2023, 960: 170611.

[10]Huang Jingdong; Li Guangqiang; Yang Xiao.Correction: Chlorination of ZnFe₂O₄ by Molten MgCl2: Effect of Adding CaCl2.Journal of Sustainable Metallurgy, 2023, 9(3).

[11]Li, Shaofei; Zhang, Huajian; Zou, Yongshun*; Gu, Huazhi; Huang, Ao; Fu, Lvping; Li, Guangqiang; Wang, Liwang.Microstructural evolution during H₂ corrosion of Al₂O₃-SiO₂ based refractory aggregates.Ceramics International, 2023, 49(17): 27788-27795.

[12]Zhang, Pengzhao; Li, Guangqiang; Zhu, Chengyi; Zhang, Zhicheng; Liu, Yu*.Thermodynamics on compositional design of slag for the Ti content control in bearing steel.Journal of Materials Research and Technology-JMR&T, 2023, 26: 88-98.

[13]Han, Zheng; Yan, Wen*; Yan, Junjie; Chen, Zhe; Wang, Xiao; Li, Guangqiang.Microstructures and properties of novel lightweight refractory aggregates with microporous MgO@MgAl₂O₄ core-shell structures.Journal of the European Ceramic Society, 2023, 43(12): 5398-5405.

[14]Zhu, Rong; Zhu, Chengyi*; Wu, Shuang; Wan, Xiangliang; Li, Guangqiang.Effect of CeO₂ on microstructure and properties of Ni-Co-based coatings.Journal of Materials Research and Technology-JMR&T, 2023, 26: 7329-7339.

[15]Zou, Yongshun*; Gu, Huazhi; Huang, Ao; Fu, Lvping; Li, Guangqiang; Wang, Liwang; Chen, Ding.Simultaneous enhance of the thermal shock resistance and slag-penetration resistance for tundish flow-control refractories: The role of microporous magnesia.Materials and Design, 2023, 233: 112245.

[16]Liu, Chang; Peng, Kaiyu; Wang, Qiang; Li, Guangqiang; Wang, Jujin*; Zhang, Lifeng.CFD Investigation of Melting Behaviors of Two Alloy Particles During Multiphase Vacuum Refining Process.Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2023, 54(4): 2174-2187.

[17]Liu, Ying; Yan, Wen*; Chen, Zhe; Chen, Junfeng; Liu, Yu; Li, Guangqiang.Preparation of high performance MgO ceramic filter and its interaction with molten steel: Effect of porous MgO powder.Journal of the European Ceramic Society, 2023, 43(8): 3794-3803.

[18]Liu, Ying; Yan, Wen*; Chen, Zhe; Yan, Junjie; Wang, Qiang; Li, Guangqiang.Effect of sintering atmosphere on microstructures and properties of synthesized microporous MgO refractory raw material.International Journal of Applied Ceramic Technology, 2023, 20(4): 2289-2300.

[19]Lu, Ru; Yu, Ran-ran; Li, Guang-qiang; Liu, Yu; Wang, Qiang*; Wang, Hai-chuan*.Desulfurization of rejected electrolytic manganese metal by electroslag remelting furnace with a water-cooled electrode.Journal of Iron and Steel Research International, 2023, 30(7): 1411-1425.

[20]Wang, Xijie; Li, Guangqiang; Chen, Yufei; Wang, Qiang*; Liu, Yu*.Industrial Trials on Preparation of Cerium-Treated H13 Steel by Electroslag Remelting with Cerium-Oxide Containing Slag.Steel Research International, 2023, 94(6): 2200786.

[21]Tian, Yufeng; Li, Guangqiang; Li, Yongqian; Li, Tengfei; Yuan, Cheng; Liu, Yu*.Thermodynamics and Kinetics on Hot State Modification of BOF Slag by Adding SiO₂.Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2023, 54(3): 1131-1143.

[22]Zhang, Xilin; Gao, Yunming*; Wang, Qiang; Li, Guangqiang.Determination of Density and Surface Tension of CaO-SiO₂-Al₂O₃ Molten Slag by Pendant Drop Method.Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2023, 54(3): 1499-1510.

[23]Tan, Chong; Liu, Chang; Fu, Lvping; Yan, Wen; Chen, Zhiyuan; Li, Guangqiang; Wang, Qiang*.Slag Corrosion Behavior of Novel Lightweight Magnesia Castable in a High-Basicity Slag: Role of Micropores and Nanosized Zirconia.Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2023, 54(3): 1511-1523.

[24]Lao, Yigui; Gao, Yunming*; Yuan, Cheng; Li, Guangqiang*.Effect of Al Content in Steel on Interfacial Interaction between Molten Steel and MgO Substrate.Steel Research International, 2023, 94(6): 2200778.

[25]Li, Tengfei; Li, Guangqiang; Wang, Xijie; Deng, Xiaoxuan; Liu, Yu*.Novel method on homogenized La treatment of GCr15 steel by the self-reaction of La₂O₃ containing slag and steel for vacuum electroslag remelting.Vacuum, 2023, 211: 111966.

[26]He, Qinyu; Zhu, Chengyi*; Liu, Yulong; Yan, Wen; Wan, Xiangliang; Li, Guangqiang.Effect of annealing temperature on the properties of phosphorus micro-alloyed non-oriented electrical steels.Journal of Materials Research and Technology-JMR&T, 2023, 23: 4454-4465.

[27]Cheng Yuanyao; Zhao Gang; Xu Deming*; Mao Xinping; Li Guangqiang.Effect of Austenitizing Temperature on Microstructures and Mechanical Properties of Si-Mn Hot-Rolled Plate After Quenching and Partitioning Treatment.Acta Metallurgica Sinica, 2023, 59(3): 413-423.

[28]Zhang, Jinshuai; Li, Guangqiang*; Wang, Honghong*; Wan, Xiangliang; Hu, Mingfeng; Cao, Yulong.Achieving superior cryogenic impact toughness and sufficient tensile properties in a novel high-Mn austenitic steel weld metal via cerium addition.Journal of Materials Research and Technology-JMR&T, 2023, 23: 5016-5030.

[29]Gao, Yunming*; Zhang, Hucheng; Liu, Peiwang; Wang, Qiang; Li, Guangqiang.Effect of MgO on wetting and corrosion behaviour of corundum substrate by CaO-SiO₂-MgO (-Al₂O₃) slags.Ironmaking and Steelmaking, 2023.

[30]Liu, Yu*; Zhang, Pengzhao; Tian, Yufeng; Wu, Yang; Rao, Jiangping; Yang, Zhizheng; Li, Guangqiang*.Role of self-disintegrating effect produced by decomposition of limestone core on accelerating dissolution of lime in CaO-SiO₂-FeOx slag.Ironmaking and Steelmaking, 2023.

[31]Yang, Guang-mei; Yuan, Cheng; Liu, Chang*; Wang, Qiang; Li, Guang-qiang*; Zou, Yong-shun; Huang, Ao.Effect of MgO-Cr₂O₃ and MgO-MgAl₂O₄-based refractories on refractory-steel interface reaction and cleanliness of pipeline steel.Journal of Iron and Steel Research International, 2023.

[32]Huang, Jingdong; Li, Guangqiang*; Yang, Xiao*.Chlorination of ZnFe2O₄ by Molten MgCl2: Effect of Adding CaCl2.Journal of Sustainable Metallurgy, 2023, 9(3): 1253-1266.

[33]Zhao, Yi-jiang; Li, Guang-qiang; Wu, Yang; Yuan, Cheng; Meng, Ze; Deng, Xiao-xuan; Liu, Yu*.Corrosion behavior of Al₂O₃-C bricks in MnO-containing mold slag.Journal of Iron and Steel Research International, 2023.

[34]Li Jiawei; Cao Yulong; Li Guangqiang; Ma Chongsheng; Jiang Zhouhua.Study on the Interface of Stainless Steel/Carbon Steel Clad Plate Produced by Electroslag Fusion Welding.JOM, 2023, 75(9).

[35]Junjie Yan; Wen Yan; Yajie Dai; Guangqiang Li; Xiao Wang; Yucheng Yin.Evaluation of fracture behavior of lightweight magnesia‐based refractories via wedge splitting test along with acoustic emission detection.International Journal of Applied Ceramic Technology, 2023, 20(6).

[36]Wang Chongwen; Yan Wen; Yan Junjie; Chen Zhe; Wang Xiao; Li Guangqiang.Microstructure and strength of microporous MgO refractory aggregates with nano-sized pores.Journal of Asian Ceramic Societies, 2023, 11(2).

[37]Yanhui Hou; Zekun Xu; Gang Xiong; Guangqiang Li.Effects of Cu Content on Inclusions and Pitting Corrosion in S32205 Duplex Stainless Steel.Steel Research International, 2023, 94(10).

[38]Wang Libo; Hu Chengyang; Wan Xiangliang; Zhou Songbo; Wei Ran; Zhu Chengyi; Li Guangqiang; Wu Kaiming.Impacts of Nb on grain refinement in a simulated coarse-grained-heat-affected-zone of ultra-high-strength steels.Science and Technology of Welding and Joining, 2023, 28(7).

[39]Wang, Qiang; Tan, Chong; Liu, Chang; Chen, Zhiyuan; Yan, Wen; Wang, Qiang; Li, Guangqiang*.Elaboration of A Coupled Numerical Model for Predicting Magnesia Refractory Damage Behavior in High-Temperature Reactor.Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2023.

[40]Yan, Wen*; Chen, Zhe*; Li, Guangqiang; Hong, Shaosong; Li, Nan.Preparation and enhanced mechanical properties of novel Al₂O₃-C ceramic filter reinforced by microporous powder and SiC whiskers.Journal of the American Ceramic Society, 2023.

[41]Yuan, Cheng; Li, Guang qiang; Meng, Ze; Zou, Yong shun; Huang, Ao; Yan, Wen; Liu, Yu*.Effect of Rare-Earth Oxides Containing Refractories on the Cleanliness of Al-Killed Steels.Steel Research International, 2023.

[42]He, Chengjie; Zhu, Xiaoxiong; Hu, Chengyang*; Dong, Hangyu*; Wan, Xiangliang; Liu, Enyong; Li, Guangqiang; Wu, Kaiming.Processing an 18Cr-8Ni Austenitic Stainless Steel Without the Dilemma of the Strength and Ductility Trade-Off.JOM, 2023.

[43]Meng, Ze; Li, Guang-qiang; Yuan, Cheng; Zhao, Yi-jiang; Zheng, Qing; Zeng, Bin; Liu, Yu*.Comparative study on interaction between rare earth oxide refractories and rare earth treated steel.Journal of Iron and Steel Research International, 2023.

[44]Chen, Zhe; Yan, Wen*; Li, Guangqiang; Hong, Shaosong; Li, Nan.Enhanced mechanical properties of novel Al₂O₃-based ceramic filter by using microporous corundum-spinel and nano-Al₂O₃powders.Journal of the European Ceramic Society, 2023.

[45]Hou, Yan-hui*; Xu, Ze-kun; Zhou, Shi-long; Li, Guang-qiang*.Atomic-scale mechanism of effect of co-separation of elements at interface of ferrite and austenite on Cr-depleted zone of duplex stainless steel.Journal of Iron and Steel Research International, 2023.

[46]Liu, Chang; Tian, Yu-feng; Xiao, Yong-li; Li, Yong-qian; Li, Yang; Li, Guang-qiang; Wang, Qiang*.Numerical investigation of basic oxygen furnace slag modification with gas bottom-blowing and SiO₂ modifier.Journal of Iron and Steel Research International, 2023, 30(7): 1451-1460.

[47]Liu, Peng; Zheng, Wan*; Li, Guangqiang; Zhang, Huirong; Zhang, Wenwen; Wang, Chunfeng.Hot Ductility Evolution Mechanism of Titanium-Bearing Microalloyed Steels.Steel Research International, 2023.

[48]Li Kui; Gan Chang; Zhang Wei; Li Chengzhi; Li Guangqiang.Validity of isothermal kinetic prediction by advanced isoconversional method.Chemical Physics, 2023, 567.

[49]Zhang, Jinshuai; Li, Guangqiang*; Wang, Honghong*; Wan, Xiangliang; Hu, Mingfeng; Cao, Yulong.Effect of cerium on microstructure and microsegregation behavior of novel cryogenic high-Mn austenitic steel weld metal.Materials Characterization, 2022, 194: 112427.

[50]Gao Yunming*; He Lin; Qin Qingwei; Li Guangqiang.ZrO₂ Solid Electrolyte Aided Investigation on Electrodeposition in Na3AlF6-SiO₂ Melt.Acta Metallurgica Sinica, 2022, 58(10): 1292-1304.

[51]Wang, Yong; Liu, Yu*; Li, Guangqiang*; Zhu, Chengyi; Cao, Yuxin.Effect of atmosphere on oxidation behavior of novel high Mn steel bearing Cr during heat treatment.International Journal of Materials Research, 2022, 113(9): 809-819.

[52]He, Qinyu; Liu, Yulong; Zhu, Chengyi*; Xie, Xiaohui; Zhu, Rong; Li, Guangqiang.Effect of Phosphorus Content on Magnetic and Mechanical Properties of Non-Oriented Electrical Steel.Materials, 2022, 15(18): 6332.

[53]Zou, Yongshun*; Gu, Huazhi; Huang, Ao; Fu, Lvping; Li, Guangqiang; Wang, Liwang; Chen, Ding.Pore evolution of microporous magnesia aggregates with the introduction of nano-sized MgO.Ceramics International, 2022, 48(13): 18513-18521.

[54]Liu, Yu; Rao, Jiangping; Li, Guangqiang; Zhang, Zhan*; Wang, Jianfeng; Dong, Tingliang.Dissolution of Al₂O₃-C bricks in 45 wt% CaO-45 wt% SiO₂-x wt% CaF2-(10-x) wt% Na₂O slag.Ceramics International, 2022, 48(13): 19068-19072.

[55]Liu, Yulong; Zhu, Chengyi*; Huang, Luoyi; Chen, Xinyuan; Li, Guangqiang.Influence of Inclusions on Magnetic Properties of Al-Killed Non-oriented Silicon Steels.JOM, 2022, 74(7): 2645-2655.

[56]Huang, Shihui; Li, Guangqiang; Zhang, Zhan*; Tan, Qingbiao; Zhu, Guoliang.Effect of Cooling Rate on the Grain Morphology and Element Segregation Behavior of Fe-Mn-Al-C Low-Density Steel during Solidification.Processes, 2022, 10(6): 1101.

[57]Wang, Qiang; Jia, Shuyuan; Tan, Fangguan; Li, Guangqiang; Ouyang, Degang; Zhu, Shanhe; Sun, Wei; He, Zhu*."Discussion on "Numerical Study of Desulphurization Behavior During Kanbara Reactor Hot Metal Treatment''''.Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2022, 53(3): 1963-1964.

[58]Liu, Chang; Li, Guangqiang; Zhang, Lifeng; Wang, Qiang; Wang, Qiang.A Three-Dimensional Comprehensive Numerical Model of Ion Transport during Electro-Refining Process for Scrap-Metal Recycling.Materials, 2022, 15(8): 2789.

[59]Matsuura, Hiroyuki; Yang, Xiao*; Li, Guangqiang; Yuan, Zhangfu; Tsukihashi, Fumitaka*.Recycling of ironmaking and steelmaking slags in Japan and China.International Journal of Minerals Metallurgy and Materials, 2022, 29(4): 739-749.

[60]Yan, Junjie; Yan, Wen*; Chen, Zhe; Nath, Mithun; Liao, Ning; Li, Guangqiang; Wang, Qiang.A strategy for controlling microstructure and mechanical properties of microporous spinel (MgAl₂O₄) aggregates from magnesite and Al(OH)(3).Journal of Alloys and Compounds, 2022, 896: 163088.

[61]Li, Tengfei; Li, Guangqiang; Zhang, Zhan*; Liu, Yu*; Wang, Xijie.Fluoride vaporization and crystallization of CaF₂-CaO-Al₂O₃-(La₂O₃) slag for vacuum electroslag remelting.Vacuum, 2022, 196: 110807.

[62]Han, Lei; Khalil, Ahmed M. E.; Wang, Junkai; Chen, Yu; Li, Faliang; Chang, Hong; Zhang, Haijun*; Liu, Xueyin; Li, Guangqiang; Jia, Quanli; Zhang, Shaowei*.Graphene-boron nitride composite aerogel: A high efficiency adsorbent for ciprofloxacin removal from water.Separation and Purification Technology, 2022, 278: 119605.

[63]Han, Lei; Li, Xiaojian; Li, Faliang; Zhang, Haijun*; Liu, Xueyin; Li, Guangqiang; Jia, Quanli; Zhang, Shaowei*.In-situ preparation of SiC reinforced Si3N4 ceramics aerogels by foam-gelcasting method.Ceramics International, 2022, 48(1): 1166-1172.

[64]Yuan, Cheng; Liu, Yu*; Li, Guangqiang*; Zou, Yongshun; Huang, Ao..Adsorption mechanism of oxide inclusions by microporous magnesia aggregates in tundish.Ceramics International, 2022, 48(1): 427-435.

[65]Luo, Zigui; Feng, Bo; Chen, Dingya; Yang, Zhenjia; Jiang, Shangwei; Wang, Jian; Wu, Zhaoyang; Li, Guangqiang; Li, Yawei; Fan, Xi'an*.Preparation and magnetic performance optimization of FeSiAl/Al₂O₃-MnO-Al₂O₃ soft magnetic composites with particle size adjustment.Journal of Materials Science: Materials in Electronics , 2022, 33(2): 850-860.

[66]Wang, Yong; Li, Guangqiang; Zhu, Chengyi*; Liu, Xinbin; Liu, Yulong; Gao, Yang; Liu, Yu.Micro Characterization of Hot-Rolled Plate of Nb-Bearing Grain-Oriented Silicon Steel.Materials, 2022, 15(2): 429.

[67]Wang Qiang; Jia Shuyuan; Tan Fangguan; Li Guangqiang; Ouyang Degang; Zhu Shanhe; Sun Wei; He Zhu.Response to “Discussion on “Numerical Study of Desulphurization Behavior During Kanbara Reactor Hot Metal Treatment””.Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2022, 53(3).

[68]Lao Yigui; Li Guangqiang; Gao Yunming; Yuan Cheng.Wetting and interfacial interaction of molten iron on MgO substrate under different oxygen partial pressures.Journal of Materials Research and Technology-JMR&T, 2022, 21.

[69]Han Lei; Li Xiaojian; Li Faliang; Zhang Haijun; Li Guangqiang; Jia Quanli; Zhang Shaowei.Superhydrophilic/air-superoleophobic diatomite porous ceramics for highly-efficient separation of oil-in-water emulsion.Journal of Environmental Chemical Engineering, 2022, 10(5).

[70]Wu Yang; Li Guangqiang; Tan Fangguan; Li Yawei; He Zhu.Research on creep damage model of high alumina bricks.Ceramics International, 2022, 48(19PA).

[71]Cao, Yulong; Zhao, Zhengrong; Wan, Xiangliang; Li, Guangqiang*; Jiang, Zhouhua; Dong, Yanwu.Carbide Characteristics of High Vanadium High-speed Steel Manufactured by Electroslag Remelting.ISIJ International, 2022, 62(7): 1430-1438.

[72]Shi Xianju; Li Chengzhi; Wang Qiang; Li Guangqiang; Zhang Wei; Xue Zhengliang.Numerical study of the dynamic behaviour of iron ore particles during wet granulation process using discrete element method.Powder Technology, 2022, 401.

[73]Lao Yigui; Li Guangqiang; Gao Yunming; Yuan Cheng.Wetting and corrosion behavior of MgO substrates by CaO–Al₂O₃–SiO₂–(MgO) molten slags.Ceramics International, 2022, 48(10).

[74]Zhao, Zhengrong; Cao, Yulong*; Wan, Xiangliang; Li, Jiawei; Li, Guangqiang.Effect of Cooling Rate on Carbide Characteristics of the High Vanadium High-speed Steel.ISIJ International, 2022, 62(3): 524-531.

[75]Feng Bo; Li Guangqiang; Kong Dong; Xu Chenhui; Kuang Zhixiang; Ma Yan; Chen Zhuo; Li Yawei; Gu Huazhi; Fan Xi'an.Study on the mechanism of Y doping effect for improving the properties of ZnO thermoelectric ceramics.Scripta Materialia, 2022, 216.

[76]Tian Yufeng; Liu Yu; Li Guangqiang; Li Yongqian; Zhang Zhan; Tan Chong.Dissolution behavior of partially calcined limestone with residual CO₂ in converter slag.Journal of Materials Research and Technology-JMR&T, 2022, 17.

[77]Yuan Cheng; Liu Yu; Li Guangqiang; Tian Yufeng; Tan Chong; Zou Yongshun; Huang Ao; Li Yawei.Comparison study on effect of nano-sized Al₂O₃ addition on the corrosion resistance of microporous magnesia aggregates against tundish slag.Ceramics International, 2022, 48(4).

[78]Cao, Yulong; Zhao, Zhengrong; Ma, Chongsheng; Li, Guangqiang*.Precipitation Behavior and Elemental Distribution of MC Carbides in High Carbon and Vanadium High-Speed Steel.Journal of Materials Engineering and Performance, 2022, prepublish.

[79]Xue Ping; Qin Qingwei; Li Guangqiang.Construction of E-pH diagram and experimental study on wet synthesis of FePO₄ as the precursor of cathode materials.MATEC Web of Conferences, 2022, 355.

[80]Han Lei; Dong Longhao; Li Faliang; Duan Hongjuan; Zhang Haijun; Li Guangqiang; Jia Quanli; Zhang Shaowei.Preparation of Si₃N₄-BCxN-TiN composite ceramic aerogels via foam-gelcasting.Journal of the European Ceramic Society, 2022, 42(6).

[81]Gao Yunming; Zhang Hucheng; Wang Qiang; Li Guangqiang.Effect of applied voltage on wetting and corrosion of corundum refractory by CaO–SiO₂–MgO molten slag.Ceramics International, 2022, 48(7).

[82]Wang, Qiang*; Liu, Chang; Pan, Liping; He, Zhu; Li, Guangqiang.Numerical Understanding on Refractory Flow-Induced Erosion and Reaction-Induced Corrosion Patterns in Ladle Refining Process.Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2022, prepublish.

[83]Luo, Zigui; Fan, Xi'an*; Feng, Bo; Yang, Zhenjia; Chen, Dingya; Jiang, Shangwei; Wang, Jian; Wu, Zhaoyang; Liu, Xin; Li, Guangqiang; Li, Yawei.Highly enhancing electromagnetic properties in Fe-Si/MnO-SiO₂ soft magnetic composites by improving coating uniformity.Advanced Powder Technology, 2021, 32(12): 4846-4856.

[84]Cao, Yuxin; Wan, Xiangliang*; Zhou, Feng*; Wang, Yong; Liu, Xinbin; Wu, Kaiming; Li, Guangqiang.Effect of Ce Content on Microstructure-Toughness Relationship in the Simulated Coarse-Grained Heat-Affected Zone of High-Strength Low-Alloy Steels.Metals, 2021, 11(12): 2003.

[85]Su, Lijuan; Xu, Jifang*; Li, Guangqiang*; Zhu, Chengyi.Influences of deoxidation and VOD slag on the behavior of inclusions in Fe-21Cr ferrite stainless steel.Journal of Materials Research and Technology-JMR&T, 2021, 15: 1949-1958.

[86]Lu, Ru; Li, Guangqiang; Li, Jie; Chen, Yufei; Gao, Yunming; Wang, Qiang*.Effects of CaO Content and Magnesium Additive in Electroslag on Desulfurization of Rejected Electrolytic Manganese Metal Scrap.Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2021, 52(6): 4179-4196.

[87]Cheng, Yaping; Zhang, Yu; Li, Yuanyuan; Chen, Junfeng*; Xiao, Junli; Wei, Yaowu; Liu, Guangping; Li, Guangqiang; Zhang, Shaowei; Li, Nan.Degradation behaviors of cement-free corundum-spinel castables in Ruhrstahl Heraeus refining ladle: Role of infiltrated steel.Ceramics International, 2021, 47(22): 32008-32014.

[88]Chen, Junfeng; Cheng, Yaping; Li, Yuanyuan; Xiao, Junli; Zhang, Yu*; Liu, Guangping; Wei, Yaowu; Li, Guangqiang; Zhang, Shaowei*; Li, Nan.Formation of ferrospinel layer at the corroded interface between Al₂O₃-spinel refractory and molten steel in RH refining ladle.Journal of the American Ceramic Society, 2021, 104(11): 6044-6053.

[89]Kong, Dong; Chen, Dingya; Kuang, Zhixiang; Xu, Chenhui; Feng, Bo; Hu, Xiaoming; Chen, Zhuo; Ma, Yan; Fan, Xi' An*; Li, Guangqiang; Li, Yawei.Recovery of Te for the scrap of Bi₂Te₃-based alloys by vacuum metallurgy.Materials Research Express, 2021, 8(11): 115901.

[90]Cao, Yulong; Li, Jiawei; Li, Guangqiang; Dong, Yanwu*; Jiang, Zhouhua.Effect of Conductive Circuits on Bonding Quality of Bimetallic Composite Roll Produced by Electroslag Remelting Cladding.JOM, 2021, 73(10): 2973-2984.

[91]Wang, Qiang; Tan, Fangguan; He, Zhu; Li, Guangqiang; Li, Jianli*.Quantitative Evaluation of Slag Corrosion on MgO-C Refractory by Experimental and Numerical Simulation.JOM, 2021, 73(9): 2709-2714.

[92]Luo, Zigui; Fan, Xi'an*; Zhang, Yanglin; Yang, Zhenjia; Wang, Jian; Wu, Zhaoyang; Liu, Xin; Li, Guangqiang; Li, Yawei.Formation mechanism and magnetic performance of Fe-Si soft magnetic composites coated with MnO-SiO₂ composite coatings.Advanced Powder Technology, 2021, 32(9): 3364-3371.

[93]Xiao, Yongli; Tian, Yufeng; Wang, Qiang; Li, Guangqiang*.Numerical Investigation of Lime Particle Motion in Steelmaking BOF Process.JOM, 2021, 73(9): 2733-2740.

[94]Han, Lei; Chen, Yu; Chang, Hong; Li, Faliang; Liu, Cheng; Shyng, Tommy; Zhu, Yanqiu; Li, Guangqiang; Zhang, Haijun*; Jia, Quanli; Zhang, Shaowei*.One-pot foam-gelcasting/nitridation synthesis of high porosity nano-whiskers based 3D Si₃N₄ porous ceramics.Journal of the European Ceramic Society, 2021, 41(12): 6070-6074.

[95]Han, Lei; Dong, Longhao; Zhang, Haijun*; Li, Faliang; Tian, Liang; Li, Guangqiang; Jia, Quanli; Zhang, Shaowei*.Thermal insulation TiN aerogels prepared by a combined freeze-casting and carbothermal reduction-nitridation technique.Journal of the European Ceramic Society, 2021, 41(10): 5127-5137.

[96]Peng, Wangding; Chen, Zhe*; Yan, Wen*; Schaffoener, Stefan; Li, Guangqiang; Li, Yawei; Jia, Cangjian.Advanced lightweight periclase-magnesium aluminate spinel refractories with high mechanical properties and high corrosion resistance.Construction and Building Materials, 2021, 291: 123388.

[97]Luo, Zigui; Fan, Xi'an*; Zhang, Yanglin; Yang, Zhenjia; Wang, Jian; Wu, Zhaoyang; Liu, Xin; Li, Guangqiang; Li, Yawei.Influence of oxidation temperature on microstructure and electromagnetic performance of Fe-SiNe₂SiO₄ soft magnetic composites.Journal of Alloys and Compounds, 2021, 862: 158595.

[98]Wang, Qiang; Jia, Shuyuan; Tan, Fangguan; Li, Guangqiang; Ouyang, Degang; Zhu, Shanhe; Sun, Wei; He, Zhu*.Numerical Study on Desulfurization Behavior During Kanbara Reactor Hot Metal Treatment.Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2021, 52(2): 1085-1094.

[99]Gao, Yuxin; Wan, Xiangliang*; Zhou, Feng; Dong, Hangyu; Wu, Kaiming; Li, Guangqiang.The critical influence of La content on the microstructure-toughness relationship in the simulated coarse-grained heat-affected zone of high-strength low-alloy steels.Metallurgical Research and Technology, 2021, 118(2): 212.

[100]Liu, Yu; Li, Guangqiang*; Wang, Qiang; Lu, Ru; Wang, Xijie; Tian, Yufeng.Effect of slag composition on desulfurization during recycling rejected electrolytic manganese metal by electroslag remelting.Metallurgical Research and Technology, 2021, 118(2): 206.

[101]Wang, Xijie; Liu, Yu*; Li, Guangqiang*; Wang, Qiang; Li, Tengfei; Cao, Yuxin.Effect of Ce2O₃ on the fluoride vaporization of CaF₂-CaO-Al₂O₃-(Ce₂O₃) slag used for vacuum electroslag remelting.Vacuum, 2021, 185: 109997.

[102]Hu, Xiaoming; Fan, Xi'an*; Feng, Bo; Kong, Dong; Liu, Peihai; Xu, Chenhui; Kuang, Zhixiang; Li, Guangqiang; Li, Yawei.Decoupling Seebeck coefficient and resistivity, and simultaneously optimizing thermoelectric and mechanical performances for n-type BiTeSe alloy by multi-pass equal channel angular extrusion.Materials Science and Engineering B-Solid State Materials for Advanced Technology, 2021, 263: 114846.

[103]Luo Zigui; Fan Xi'an; Zhang Yanglin; Yang Zhenjia; Wang Jian; Wu Zhaoyang; Liu Xin; Li Guangqiang; Li Yawei.Influence of oxidation temperature on microstructure and electromagnetic performance of Fe-Si/Fe2SiO₄ soft magnetic composites.Journal of Alloys and Compounds, 2021, prepublish.

[104]Luo Zigui; Feng Bo; Chen Dingya; Yang Zhenjia; Jiang Shangwei; Wang Jian; Wu Zhaoyang; Li Guangqiang; Li Yawei; Fan Xi’an.Preparation and magnetic performance optimization of FeSiAl/Al₂O₃–MnO–Al₂O₃ soft magnetic composites with particle size adjustment.Journal of Materials Science: Materials in Electronics , 2021, 33(2).

[105]Lu, Ru; Li, Guang-qiang; Liu, Chang; Gao, Yun-ming; Chen, Yu-fei; Wang, Qiang*.Effects of slag composition and additive type on desulfurization of rejected electrolytic manganese metal scrap by Na₂O-containing electroslag.Journal of Iron and Steel Research International, 2021, prepublish.

[106]Wang, Xijie; Li, Guangqiang; Liu, Yu; Wang, Fang; Wang, Qiang*.Cerium Addition Effect on Modification of Inclusions, Primary Carbides and Microstructure Refinement of H13 Die Steel.ISIJ International, 2021, 61(6): 1850-1859.

[107]Cao, Yulong; Dong, Yanwu; Jiang, Zhouhua*; Li, Guangqiang; Zhao, Zhengrong.Characteristics of High Speed Steel/ductile Cast Iron Composite Roll Manufactured by Electroslag Remelting Cladding.ISIJ International, 2021, 61(7): 2127-2134.

[108]Cao, Yuxin; Wan, Xiangliang*; Zhou, Feng; Shen, Yu; Liu, Yu; Li, Guangqiang; Wu, Kaiming.Impact of Mo content on the microstructure-toughness relationship in the coarse-grained heat-affected zone of high-strength low-alloy steels.International Journal of Materials Research, 2021, 112(2): 98-107.

[109]Gao, Yang; Guo, Xiaolong; Wang, Yong; Liu, Yulong; Zhu, Chengyi*; Li, Guangqiang.Effect of Nb content on primary recrystallization microstructure, texture and magnetic properties of grain-oriented silicon steel manufactured by low-temperature slab reheating.Journal of Magnetism and Magnetic Materials, 2020, 516: 167343.

[110]Wang, Yong; Zhu, Chengyi; Li, Guangqiang*; Liu, Yulong; Liu, Yu.Influence of Nb Content on Precipitation, Grain Microstructure, Texture and Magnetic Properties of Grain-Oriented Silicon Steel.Materials, 2020, 13(23): 5581.

[111]Zhang, Yanglin; Fan, Xi'an; Hu, Wentao; Luo, Zigui; Yang, Zhenjia; Li, Guangqiang; Li, Yawei.Microstructure and magnetic properties of MnO₂ coated iron soft magnetic composites prepared by ball milling.Journal of Magnetism and Magnetic Materials, 2020, 514: 167295.

[112]Hou, Yanhui; Wang, Jingru; Liu, Linli; Li, Guangqiang*; Zhai, Dongyu*.Mechanism of pitting corrosion induced by inclusions in Al-Ti-Mg deoxidized high strength pipeline steel.Micron, 2020, 138: 102898.

[113]Huang, Yifan; Chen, Zhe; Yan, Wen; Dai, Yajie; Li, Guangqiang; Wang, Qiang; Li, Nan; Li, Yawei.Microstructures and strengths of microporous MgO-Al₂O₃refractory aggregates using two types of magnesite.International Journal of Applied Ceramic Technology, 2020, ijac.13619.

[114]Hu, Xiaomin; Fan, Xi'an; Feng, Bo; Kong, Dong; Liu, Peihai; Xu, Chenhui; Kuang, Zhixiang; Li, Guangqiang; Li, Yawei。Evolution of microstructure and performance of n-type BiTeSe thermoelectric materials fabricated by multi-path equal channel angular extrusion.Materials Today Communications, 2020, 24: 101121.

[115]Gao, Yang; Xu, Guang; Guo, Xiaolong; Li, Guangqiang; Wang, Yong.Primary recrystallization characteristics and magnetic properties improvement of high permeability grain-oriented silicon steel by trace Cr addition.Journal of Magnetism and Magnetic Materials, 2020, 507: 166849.

[116]Chen, Zhe; Yan, Wen*; Schaffoner, Stefan; Dai, Yajie; Wang, Qiang; Li, Guangqiang.A novel approach to lightweight alumina-carbon refractories for flow control of molten steel.Journal of the American Ceramic Society, 2020, 103(8): 4713-4724.

[117]Hu, Wentao; Fan, Xi'an; Luo, Zigui; Luo, Fan; Li, Guangqiang; Wang, Jian.Prepared novel Fe soft magnetic composites coated with ZnO by Zn (CH₃COO)₂ pyrolysis.Journal of Magnetism and Magnetic Materials, 2020, 505: 166744.

[118]Zou, Yongshun; Gu, Huazhi; Huang, Ao; Fu, Lvping; Li, Guangqiang.Fabrication and properties of in situ intergranular CaZrO₃ modified microporous magnesia aggregates.Ceramics International, 2020, 46(10): 16956-16965.

[119]Wang, H. H.*; Meng, L.; Luo, Q.; Sun, C.; Li, G. Q.; Wan, X. L.*.Superior cryogenic toughness of high-Mn austenitic steel by welding thermal cycles: The role of grain boundary evolution.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2020, 788: 139573.

[120]Wang, Yong; Zhu, Chengyi; Li, Guangqiang; Liu, Yulong; Liu, Yu.Effect of decarburisation and nitriding on the carbon content, precipitates, microstructure and texture of Nb-bearing grain-oriented silicon steel.Materials at High Temperatures, 2020, 37(3): 155-164.

[121]Wang, Qiang; Liu, Yu; Huang, Ao; Yan, Wen; Gu, Huazhi; Li, Guangqiang.CFD investigation on influence of orifice geometry on micro-scale inclusion movement.Powder Technology, 2020, 367: 358-375.

[122]Zou, Yongshun; Huang, Ao; Wang, Runfeng; Fu, Lvping; Gu, Huazhi; Li, Guangqiang.Slag corrosion-resistance mechanism of lightweight magnesia-based refractories under a static magnetic field.Corrosion Science, 2020, 167: 108517.

[123]Hu, Xiaoming; Fan, Xi'an; Feng, Bo; Kong, Dong; Liu, Peihai; Li, Rusong; Zhang, Yanglin; Li, Guangqiang; Li, Yawei.Equal channel angular extrusion: An effective method to refine the microstructure of cast n-type Bi₂Te₃ based ingot to co-optimize thermoelectric and mechanical properties.Solid State Sciences, 2020, 103: 106191.

[124]Hu, C. Y.; Wan, X. L.*; Wu, K. M.; Xu, D. M.; Li, G. Q.; Xu, G.; Misra, R. D. K.*.On the impacts of grain refinement and strain-induced deformation on three-body abrasive wear responses of 18Cr-8Ni austenitic stainless steel.Wear, 2020, 446: 203181.

[125]Qi, Jiangtao; Yan, Wen*; Chen, Zhe*; Schaffoner, Stefan; Zhou, Wenying; Li, Guangqiang; Wang, Qiang.Preparation and characterization of microporous mullite-corundum refractory aggregates with high strength and closed porosity.Ceramics International, 2020, 46(6): 8274-8280.

[126)Hu, Xiaoming; Fan, Xi'an; Feng, Bo; Kong, Dong; Liu, Peihai; Li, Rusong; Zhang, Yanglin; Li, Guangqiang; Li, Yawei.Microstructural Refinement and Performance Improvement of Cast n-Type Bi₂Te_2.79Se_0.21 Ingot by Equal Channel Angular Extrusion.Metals and Materials International, 2020.

[127)Luo, Zigui; Fan, Xi'an*; Hu, Wentao; Luo, Fan; Wang, Jian; Wu, Zhaoyang; Liu, Xin; Li, Guangqiang; Li, Yawei.Properties of Fe₂SiO₄/SiO₂ coated Fe-Si soft magnetic composites prepared by sintering Fe-6.5wt%Si/Fe₃O₄ composite particles.Journal of Magnetism and Magnetic Materials, 2020, 499: 166278.

[128)Liu, Yu; Wang, Yong; Li, Guangqiang*.Oxidation Behavior and Subsurface Phase Transformation of Novel High Mn Cryogenic Steel during Heat Treatment.Steel Research International, 2020, 91(4): 1900555.

[129)Liu, Yu; Wang, Xijie; Li, Guangqiang*; Huang, Xuechi.Cleanliness improvement and microstructure refinement of ingot processed by vacuum electroslag remelting.Journal of Materials Research and Technology-JMR&T, 2020, 9(2): 1619-1630.

[130]Hou Yanhui; Li Tengfei; Li Guangqiang; Cheng Changgui.Mechanism of Yttrium composite inclusions on the localized corrosion of pipeline steels in NaCl solution.Micron, 2020, 130: 102820.

[131]Feng, Bo; Li, Guangqiang; Hu, Xiaoming; Liu, Peihai; Li, Rusong; Zhang, Yanglin; Li, Yawei; He, Zhu; Fan, Xi'an.Enhancement of thermoelectric performances of BiCuSeO through Y doping and grain refining.Journal of Materials Science: Materials in Electronics , 2020, 31(6): 4915-4923.

[132]Feng, Bo; Li, Guang-Qiang; Hu, Xiao-Ming; Liu, Pei-Hai; Li, Ru-Song; Zhang, Yang-Lin; Li, Ya-Wei; He, Zhu; Fan, Xi-An.Improvement of Thermoelectric Performance in BiCuSeO Oxide by Ho Doping and Band Modulation.Chinese Physics Letters, 2020, 37(3): 037201.

[133]Wang, Xijie; Li, Guangqiang; Liu, Yu; Wang, Qiang; Zhang, Zhao.Role of slag on inclusions control and its effect on primary carbides in H13 steel.Metallurgical Research & Technology, 2020, 117(1): 111.

[134]Luo, Zigui; Fan, Xi'an*; Hu, Wentao; Luo, Fan; Wang, Jian; Wu, Zhaoyang; Liu, Xin; Li, Guangqiang; Li, Yawei.High performance Fe-Si soft magnetic composites coated with novel insulating-magnetic-insulating (IMI) layer.Journal of Magnetism and Magnetic Materials, 2020, 496: UNSP 165937.

[135]Wu, Muhan; Huang, Ao; Bai, Chen; Gu, Huazhi; Li, Guangqiang.Corrosion Mechanisms of Different Refractory Aggregates in Contact with SiO₂-MgO-Based Slag.Interceram: International Ceramic Review , 2020, 69(1): 22-29.

[136]Hu, Xiaoming; Hu, Jie; Fan, Xi'an; Feng, Bo; Pan, Zhao; Liu, Peihai; Zhang, Yanglin; Li, Rusong; He, Zhu; Li, Guangqiang; Li, Yawei.Artificial porous structure: An effective method to improve thermoelectric performance of Bi₂Te₃ based alloys.Journal of Solid State Chemistry, 2020, 282: 121060.

[137]Xu, D. M.; Li, G. Q.; Wan, X. L.*; Misra, R. D. K.; Yu, J. X.; Xu, G..On the deformation mechanism of austenitic stainless steel at elevated temperatures: A critical analysis of fine-grained versus.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2020, 773: 138722.

[138]Zou, Yongshun; Gu, Huazhi; Huang, Ao; Fu, Lvping; Li, Guangqiang.Fabrication and analysis of lightweight magnesia based aggregates containing nano-sized intracrystalline pores.Materials and Design, 2020, 186: 108326.

[139]Luo, Fan; Fan, Xi'an*; Luo, Zigui; Hu, Wentao; Wang, Jian; Wu, Zhaoyang; Li, Guangqiang; Li, Yawei; Liu, Xin.Microstructure, formation mechanism and magnetic properties of Fe1.82Si0.18@Al₂O₃ soft magnetic composites.Journal of Magnetism and Magnetic Materials, 2020, 493: UNSP 165744.

[140]Cao, Yulong; Li, Guangqiang*; Jiang, Zhouhua*; Dong, Yanwu.Microstructure evolution of roll core during the preparation of composite roll by electroslag remelting cladding technology.High Temperature Materials and Processes, 2020, 39(1): 270-280.

[141]Zhu C.-Y.; Huang L.-Y.; Luo X.-Y.; Liu Y.-L.; Wang Y.; Li G.-Q.Effect of calcium treatment on characteristics of inclusions in finished non-oriented silicon steel.Journal of Iron and Steel Research, 2020, 32(2): 117-128.

[142]HUANG Ao; LI Shenghao; ZHOU Yongshun; GU Huazhi; LI Guangqiang; LI Yawei.Research Progress on Slag Resistance of Refractories with Electromagnetic Field.China's Refractories, 2020, 29(03): 19-23.

[143]Hu, Xiaoming; Jiang, Chengpeng; Fan, Xi'An*; Feng, Bo; Liu, Peihai; Zhang, Yanglin; Li, Rusong; He, Zhu; Li, Guangqiang; Li, Yawei.Investigation on waste heat recovery of a nearly kilowatt class thermoelectric generation system mainly based on radiation heat transfer.Energy Sources, Part A: Recovery, Utilization, and Environmental Effects , 2020.

[144]Wang, Qiang; Liu, Yu; Lu, Ru; Wang, Fang; He, Zhu; Li, Guangqiang*.Influence of Electro-Emulsification on Desulfurization of Rejected Electrolytic Manganese Metal in Electroslag Remelting Process.Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2020.

[145]Cao, Yulong; Li, Guangqiang; Jiang, Zhouhua*; Dong, Yanwu; Zhao, Zhengrong; Niu, Chenrui.Interface Characteristics of GCr15/45 Carbon Steel Composite Billet Produced by Electroslag Remelting Cladding.Materials Transactions, 2020, 61(11): 2228-2235.

[146]Cao, Yulong; Li, Guangqiang*; Jiang, Zhouhua; Dong, Yanwu.Effect of Electrode Immersion Depth on the Electrical Resistance and Heat Generation in the Electroslag Remelting Process.JOM, 2020.

[147]Feng, Bo; Jiang, Xingxing; Pan, Zhao*; Hu, Lei; Hu, Xiaoming; Liu, Peihai; Ren, Yang; Li, Guangqiang; Li, Yawei; Fan, Xi'an.Preparation, Structure, and enhanced thermoelectric properties of Sm-doped BiCuSeO oxyselenide????(Open Access).Materials and Design, 2020, 185: 108263.

[148]Hou, Yanhui; Xiong, Gang; Liu, Linli; Li, Guangqiang*; Moelans, Nele; Guo, Muxing.Effects of LaAlO₃and La₂O₂S inclusions on the initialization of localized corrosion of pipeline steels in NaCl solution.Scripta Materialia, 2020, 177: 151-156.

[149]Lao, Yigui; Gao, Yunming*; Deng, Fangjie; Wang, Qiang; Li, Guangqiang.Effects of basicity and CaF2 on the viscosity of CaF₂-CaO-SiO₂ slag for electroslag remelting process.Metallurgical Research & Technology, 2019, 116(6): 638.

[150]Luo, Zigui; Fan, Xi'an*; Hu, Wentao; Luo, Fan; Li, Guangqiang; Li, Yawei; Wang, Jian; Liu, Xin.Effect of sintering temperature on microstructure and magnetic properties for Fe-Si soft magnetic composites prepared by water oxidation combined with spark plasma sintering.Journal of Magnetism and Magnetic Materials, 2019, 491: UNSP 165615.

[151]Wang, Xijie; Li, Guangqiang; Liu, Yu; Cao, Yulong; Wang, Fang.Investigation of Primary Carbides in a Commercial-Sized Electroslag Remelting Ingot of H13 Steel.Metals, 2019, 9(12): 1247.

[152]Hu, Wentao; Fan, Xi'an*; Luo, Zigui; Luo, Fan; Li, Guangqiang; Li, Yawei; Wang, Jian.Microstructure and Magnetic Properties of Fe/ZrSiO₄ Composites Prepared by Mechanical Milling and Spark Plasma Sintering.IEEE Transactions on Magnetics, 2019, 55(12): 2002707.

[153]Cao, Y X; Wan, X L*; Hou, Y H; Liu, Y; Song, M M; Li, G Q*.Comparative study on the effect of Y content on grain refinement in the simulated coarse-grained heat-affected zone of X70 pipeline steels.Micron, 2019, 127: UNSP 102758.

[154]Gan, Xiaolong; Wan, Xiangliang*; Zhang, Yongjie; Wang, Honghong; Li, Guangqiang; Xu, Guang; Wu, Kaiming.Investigation of characteristic and evolution of fine-grained bainitic microstructure in the coarse-grained heat-affected zone of super-high strength steel for offshore structure.Materials Characterization, 2019, 157: 109893.

[155]Hu, Xiaoming; Xiang, Qiusheng; Kong, Dong; Fan, Xian*; Feng, Bo; Pan, Zhao; Liu, Peihai; Li, Rusong; Li, Guangqiang; Li, Yawei.The effect of Ni/Sn doping on the thermoelectric properties of BiSbTe polycrystalline bulks.Journal of Solid State Chemistry, 2019, 277: 175-181.

[156]Cao, Yuxin; Wan, Xiangliang*; Hou, Yanhui; Niu, Chenrui; Liu, Yu; Li, Guangqiang*.In Situ Observation of Grain Refinement in the Simulated Heat-Affected Zone of Al-Ti-0.05% Ce-Deoxidized Steel.Steel Research International, 2019, 90(9): 1900084.

[157]Luo, Fan; Fan, Xi'an*; Luo, Zigui; Hu, Wentao; Wang, Jian; Wu, Zhaoyang; Li, Guangqiang; Li, Yawei; Liu, Xin.Influences of Fe2O₃ content on structure and magnetic performances of FeSiAl soft magnetic composites.Materials Research Express, 2019, 6(11): 116106.

[158]Luo, Fan; Fan, Xi'an*; Luo, Zigui; Hu, Wentao; Li, Guangqiang; Li, Yawei; Liu, Xin; Wang, Jian.Ultra-low inter-particle eddy current loss of Fe₃Si/Al₂O₃ soft magnetic composites evolved from FeSiAl/Fe₃O₄ core-shell particles.Journal of Magnetism and Magnetic Materials, 2019, 484: 218-224.

[159]Wu, Guiyuan; Yan, Wen*; Schaffoner, Stefan; Dai, Yajie*; Han, Bingqiang; Li, Tianqing; Ma, Sanbao; Li, Nan; Li, Guangqiang.A comparative study on the microstructures and mechanical properties of a dense and a lightweight magnesia refractories.Journal of Alloys and Compounds, 2019, 796: 131-137.

[160]Shen Yu; Wan Xiangliang*; Liu Yu*; Li Guangqiang; Xue Zhengliang; Wu Kaiming.The significant impact of Ti content on microstructure-toughness relationship in the simulated coarse-grained heated-affected zone of high-strength low-alloy steels.Ironmaking and Steelmaking, 2019, 46(6): 584-596.

[161]Wang, Qiang; Liu, Yu; Wang, Fang; Cao, Yulong; Li, Guangqiang*.Study on Sulfur Transfer Behavior during Refining of Rejected Electrolytic Manganese Metal.Metals, 2019, 9(7): 751.

[162]Gao Yang; Xu Guang; Guo Xiaolong; Li Guangqiang*.Effect of Cr on secondary recrystallization behaviors in high permeability grain oriented silicon steel manufactured by low-temperature slab reheating.Journal of Magnetism and Magnetic Materials, 2019, 476: 428-436.

[163]Luo, Q; Wang, H H*; Li, G Q; Sun, C; Li, D H; Wan, X L*.On mechanical properties of novel high-Mn cryogenic steel in terms of SFE and microstructural evolution.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2019, 753: 91-98.

[164]Huang Ao; Huo Yanzhu; Yang Juan*; Li Guangqiang.Computational Simulation and Prediction on Electrical Conductivity of Oxide-Based Melts by Big Data Mining.Materials, 2019, 12(7): 1059.

[165]Cao, Yuxin; Li, Guangqiang; Hou, Yanhui*; Moelans, Nele; Guo, Muxing.DFT study on the mechanism of inclusion-induced initial pitting corrosion of Al-Ti-Ca complex deoxidized steel with Ce treatment.Physica B: Condensed Matter , 2019, 558: 10-19.

[166]Liu Yulong; Zhu Chengyi*; Jia Juan; Wang Yong; Liu Yu; Li Guangqiang.Effect of Normalizing Annealing Temperature on Precipitates and Texture of Nb-Cr-Bearing Decarburized Grain-Oriented Silicon Steels.Metals, 2019, 9(4): 457.

[167]Feng, Bo; Li, Guangqiang; Pan, Zhao; Hu, Xiaoming; Liu, Peihai; Li, Yawei; He, Zhu; Fan, Xi'an*.Enhanced thermoelectric performances in BiCuSeO oxyselenides via Er and 3D modulation doping.Ceramics International, 2019, 45(4): 4493-4498.

[168]Hu, Xiaoming; Fan, Xi'an*; Jiang, Chengpeng; Pan, Zhao; Feng, Bo; Liu, Peihai; Li, Guangqiang; Li, Yawei.Thermal stability of n-type zone-melting Bi₂(Te, Se)₃ alloys for thermoelectric generation.Materials Research Express, 2019, 6(3): 035907.

[169]Luo, Zigui; Fan, Xi'an*; Hu, Wentao; Luo, Fan; Li, Guangqiang; Li, Yawei; Liu, Xin; Wang, Jian.Controllable SiO₂ insulating layer and magnetic properties for intergranular insulating Fe-6.5wt.%Si/SiO₂ composites.Advanced Powder Technology, 2019, 30(3): 538-543.

[170]Feng, Bo; Li, Guangqiang; Pan, Zhao; Hu, Xiaoming; Liu, Peihai; He, Zhu; Li, Yawei; Fan, Xi'an*.Enhanced thermoelectric properties in BiCuSeO ceramics by Pb/Ni dual doping and 3D modulation doping.Journal of Solid State Chemistry, 2019, 271: 1-7.

[171]Pan, Zhao; Chen, Jun*; Yu, Runze; Patra, Lokanath; Ravindran, Ponniah; Sanson, Andrea; Milazzo, Ruggero; Carnera, Alberto; Hu, Lei; Wang, Lu; Yamamoto, Hajime; Ren, Yang; Huang, Qingzhen; Sakai, Yuki; Nishikubo, Takumi; Ogata, Takahiro; Fan, Xi'an; Li, Yawei; Li, Guangqiang; Hojo, Hajime; Azuma, Masaki; Xing, Xianran.Large Negative Thermal Expansion Induced by Synergistic Effects of Ferroelectrostriction and Spin Crossover in PbTiO₃-Based Perovskites.Chemistry of Materials, 2019, 31(4): 1296-1303.

[172]Liu, Yu; Li, Guangqiang; Wan, Xiangliang*; Zhang, Xianguang; Shen, Yu; Wu, Kaiming.Toughness improvement by Zr addition in the simulated coarse-grained heat-affected zone of high-strength low-alloy steels.Ironmaking and Steelmaking, 2019, 46(2): 113-123.

[173]Liu Yu; Wan Xiangliang; Li Guangqiang*; Wang Yong; Zheng Wan; Hou Yanhui.Particle and microstructural characteristics in the coarse-grained heat-affected zone of Al-Ti-Ca complex deoxidized steels.International Journal of Materials Research, 2019, 110(2): 137-147.

[174]Xu D M; Wan X L; Yu J X; Xu G; Li G Q*.Effect of strain rate on microstructures and mechanical properties of Fe-18Cr-8Ni steel.Materials Science and Technology, 2019, 35(2): 195-203.

[175]Liu Yu; Wan Xiangliang; Li Guangqiang*; Wang Yong; Zheng Wan; Hou Yanhui.Grain refinement in coarse-grained heat-affected zone of Al-Ti-Mg complex deoxidised steel.Science and Technology of Welding and Joining, 2019, 24(1): 43-51.

[176]Wang, Yong; Zhu, Chengyi; Li, Guangqiang*; Liu, Yu; Zhou, Bowen.The effect of Nb content on precipitates, microstructure and texture of grain oriented silicon steel.High Temperature Materials and Processes, 2019, 38(2019): 628-638.

[177]Liu Yu; Zhang Zhao; Li Guangqiang*; Wang Qiang; Li Baokuan.Effect of Current on Segregation and Inclusions Characteristics of Dual Alloy Ingot Processed by Electroslag Remelting.High Temperature Materials and Processes, 2019, 38(1): 207-218.

[178]Su Y.; Feng B.; Hu X.; Liu P.; Li G.; Fan X.*。Effect of synergistic adjustment of Ba-Pb doping and grain refinement on thermoelectric property of BiCuSeO semiconductor ceramics [Ba-Pb雙摻雜與晶粒細化的協同調整對BiCuSeO半導體陶瓷熱電性能的影響]。Materials Science and Engineering of Powder Metallurgy, 2019, 24(3): 239-247.

[179]Huang A.; Wang Y.; Zou Y.; Fu L.; Gu H.; Li G..Research Progress of Interaction between Refractories and Molten Steel [耐火材料與鋼液相互作用的研究進展].Materials China, 2019, 38(8): 775-781.

[180]Liu, Yu; Zhang, Zhao; Li, Guangqiang*; Wu, Yang; Wang, Xijie; Li, Baokuan.Effect of SiO₂containing slag for electroslag remelting on inclusion modification of 42CrMo steel.Metallurgical Research & Technology, 2019, 116(6): 627.

[181]Shen, Yu; Wan, Xiangliang*; Liu, Yu; Li, Guangqiang; Wu, Kaiming.Effect of Zr on second-phase particle and impact toughness in the heat-affected zone of high-strength steel.Transactions of the China Welding Institution, 2019, 40(8): 55-62.

[182]Ma, Beiyue*; Gao, Zhi*; Su, Chang; Ren, Xinming; Li, Guangqiang; Zhu, Qiang.Recycling of coal ash for production of dense beta-Sialon/ZrN/ZrON-based ceramics without sintering aids via pressureless sintering.International Journal of Applied Ceramic Technology, 2019.

[183]Lao, Yigui; Gao, Yunming*; Wang, Qiang; Li, Guangqiang.A Technological Review on Measurements of Electrical Conductivity for Metallurgical Ionic Melts.Cailiao Daobao/Materials Reports, 2019, 33(6): 1882-1888.

[184]Liu, Jianjian; Zhu, Chengyi*; Li, Guangqiang.Effect of Graphene/Graphene Oxide on Wear Resistance and Thermal Conductivity of Co-Ni Coatings.JOM, 2019.

[185]Feng, Bo; Li, Guangqiang; Hu, Xiaoming; Liu, Peihai; Li, Rusong; Zhang, Yanglin; Li, Yawei; He, Zhu; Fan, Xi'an*.Enhancement of the Thermoelectric Properties of BiCuSeO via In Doping and Powder Size Controlling.Journal of Electronic Materials, 2019.

[186]Zhang, Wenxuan; Huang, Ao; Zou, Yongshun*; Gu, Huazhi; Fu, Lvping; Li, Guangqiang.Corrosion modeling of magnesia aggregates in contact with CaO-MgO-SiO₂ slags.Journal of the American Ceramic Society, 2019.

[187]Liu, Jianjian; Zhu, Chengyi; Li, Guangqiang.Application Research Progress of Coatings on Copper Plate in Continuous Casting Mould.Cailiao Daobao/Materials Reports, 2019, 33(9): 2831-2838.

[188]Liu L; Yue Q; Li G Q; Xu K; Wang J; Wu Z Y*; Fan X A.Influence of SiO₂insulation layers thickness distribution on magnetic behaviors of Fe-Si@SiO₂soft magnetic composites.Journal of Physics and Chemistry of Solids, 2019, 132: 76-82.

[189]Liu Yu; Zhang Zhao; Li Guangqiang*; Wu Yang; Xu Deming; Li Baokuan.Investigation of fluoride vaporization from CaF₂-CaO-Al₂O₃ slag for vacuum electroslag remelting.Vacuum, 2018, 158: 6-13.

[190]Xu, D M; Li, G Q; Wan, X L*; Misra, R D K; Yu, J X; Zhang, Y J; Xu, G.The significant impact of cold deformation on structure-property relationship in phase reversion-induced stainless steels.Materials Characterization, 2018, 145: 157-171.

[191]Feng, Bo; Li, Guangqiang; Pan, Zhao; Hu, Xiaoming; Liu, Peihai; He, Zhu; Li, Yawei; Fan, Xi'an*.Enhanced thermoelectric performance in BiCuSeO oxyselenides via Ba/Te dual-site substitution and 3D modulation doping.Journal of Solid State Chemistry, 2018, 266: 297-303.

[192]Hu, Hongbo; Gao, Yunming*; Lao, Yigui; Qin, Qingwei; Li, Guangqiang; Chen, George Z.Yttria-Stabilized Zirconia Aided Electrochemical Investigation on Ferric Ions in Mixed Molten Calcium and Sodium Chlorides.Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2018, 49(5): 2794-2808.

[193]Qiang Wang; Ruiting Wang; Zhu He; Guangqiang Li; Baokuan Li; Huabing Li.Numerical analysis of inclusion motion behavior in electroslag remelting process.International Journal of Heat and Mass Transfer, 2018, 125: 1333-1344.

[194]Feng, Bo; Li, Guangqiang; Pan, Zhao; Hu, Xiaoming; Liu, Peihai; Li, Yawei; He, Zhu; Fan, Xi'an*.Synergistic effects of Bi Deficiencies and Fe-doping on the thermoelectric properties and hardness of BiCuSeO ceramics.Journal of the Ceramic Society of Japan, 2018, 126(9): 699-705.

[195]Bo Feng; Guangqiang Li; Zhao Pan; Xiaoming Hu; Peihi Liu; Yawei Li; Zhu He; Xi'an Fan.Enhancing thermoelectric and mechanical performances in BiCuSeO by increasing bond covalency and nanostructuring.Journal of Solid State Chemistry, 2018, 265: 306-313.

[196]Wang, Qiang; Sun, Mei jia; Li, Bao kuan*; Li, Guang qiang; Peng, Jian ping.Numerical modeling of effect of slot on bubble motion in aluminum electrolytic process.Transactions of Nonferrous Metals Society of China, 2018, 28(8): 1670-1678.

[197]Yu Liu; Xijie Wang; Guangqiang Li; Qiang Wang; Zhao Zhang; Baokuan Li.Role of vacuum on cleanliness improvement of steel during electroslag remelting.Vacuum, 2018, 154: 351-358.

[198]Bo Feng; Guangqiang Li; Zhao Pan; Hu Xiaoming; Liu Peihai; He Zhu; Li Yawei; Xi'an Fan.Effect of synthesis processes on the thermoelectric properties of BiCuSeO oxyselenides.Journal of Alloys and Compounds, 2018, 754: 131-138.

[199]Jiang, Chengpeng; Fan, Xi'an*; Hu, Jie; Feng, Bo; Xiang, Qiusheng; Li, Guangqiang; Li, Yawei; He, Zhu.Thermal Stability of Zone Melting p-Type (Bi, Sb)₂Te₃ Ingots and Comparison with the Corresponding Powder Metallurgy Samples.Journal of Electronic Materials, 2018, 47(7): 4038-4046.

[200]Xu Deming; Wan Xiangliang; Yu Jianxin; Xu Guang; Li Guangqiang*.Effect of Cold Deformation on Microstructures and Mechanical Properties of Austenitic Stainless Steel.Metals, 2018, 8(7): 522.

[201]Yuan Qing; Xu Guang*; Liu Sheng; Liu Man; Hu Haijiang; Li Guangqiang.Effect of Rolling Reduction on Microstructure and Property of Ultrafine Grained Low-Carbon Steel Processed by Cryorolling Martensite.Metals, 2018, 8(7): 518.

[202]Jie Hu; Xi’An Fan; Chengpeng Jiang; Bo Feng; Qiusheng Xiang; Guangqiang Li; Zhu He; Yawei Li.Introduction of porous structure: A feasible and promising method for improving thermoelectric performance of Bi₂Te₃ based bulks.Journal of Materials Science & Technology, 2018.

[203]Yu Zhang; Junfeng Chen; Nan Li; Yaowu Wei; Bingqiang Han; Yaping Cao; Guangqiang Li.The microstructure evolution and mechanical properties of MgO-C refractories with recycling Si/SiC solid waste from photovoltaic industry.Ceramics International, 2018.

[204]Liu, Y; Wang, L; Li, G*; Zhang, Z; Xu, X; Li, Y; Chen, J.Effect of Submicron-Carbon-Containing MgO-C Refractories on Carbon Pickup of Ultra-Low Carbon Steel.Journal of Ceramic Science and Technology, 2018, 9(2): 141-148.

[205]Pan, Zhao; Jiang, Xingxing; Chen, Jun*; Hu, Lei; Yamamoto, Hajime; Zhang, Linxing; Fan, Longlong; Fan, Xi'an; Li, Yawei; Li, Guangqiang; Ren, Yang; Lin, Zheshuai; Azuma, Masaki; Xing, Xianran.Large spontaneous polarization in polar perovskites of PbTiO₃-Bi(Zn_1/2Ti_1/2)O₃.Inorganic Chemistry Frontiers, 2018, 5(6): 1277-1281.

[206]Qiang Wang; Fengsheng Qi; Zhu He; Yawei Li; Guangqiang Li.Effect of graphite content and heating temperature on carbon pick-up of ultra-low-carbon steel from magnesia-carbon refractory using CFD modelling.International Journal of Heat and Mass Transfer, 2018, 120: 86-94.

[207]Bo Feng; Guangqiang Li; Zhao Pan; Yanhui Hou; Chengcheng Zhang; Chengpeng Jiang; Jie Hu; Qiusheng Xiang; Yawei Li; Zhu He; Xi'an Fan.Effect of Ba and Pb dual doping on the thermoelectric properties of BiCuSeO ceramics.Materials Letters, 2018, 217: 189-193.

[208]Liu, Yu; Li, Guangqiang*; Wang, Li; Zhang, Zhao.Effect of the Tundish Gunning Materials on the Steel Cleanliness.High Temperature Materials and Processes, 2018, 37(4): 313-323.

[209]D.M. Xu; G.Q. Li; X.L. Wan; R.D.K. Misra; X.G. Zhang; G. Xu; K.M. Wu.The effect of annealing on the microstructural evolution and mechanical properties in phase reversed 316LN austenitic stainless steel.Materials Science and Engineering: A , 2018, 720: 36-48.

[210]Qiang Wang; Yu Liu; Guangqiang Li; Yunming Gao; Zhu He; Baokuan Li.Predicting transfer behavior of oxygen and sulfur in electroslag remelting process.Applied Thermal Engineering, 2018, 129: 378-388.

[211]Zhu C.; Luo X.; Li G.; Feng J.; Yan Z.Formation mechanism analysis on magnesium-bearing inclusions in non-oriented silicon steels [無取向硅鋼中含鎂夾雜物的形成機理分析].Journal of Chongqing University, 2018, 41(8): 34-43.

[212]Lao Y.-G.; Gao Y.-M.; Wang Q.; Li G.-Q.Electrical conductivity measurement of 80%CaF2-10%Ca010%Si02 melt by CVCC method.Journal of Iron and Steel Research, 2018, 30(10): 789-795.

[213]LIU Yu; LI Guangqiang; ZHANG Zhao; WANG Li.Effect of Tundish Lining on Steel Cleanliness.China's Refractories, 2018, 27(03): 32-37.

[214]Guangqiang LI; Guojun Ma.(I003)Approach of heat recovery from BF slag and CO₂ absorption by steelmaking slags in China.材料とプロセス, 2018, 31(1 TN.175): 88-91.

[215]Chang, W*; Li, G; Kong, J; Sun, Y; Jiang, G; Liu, H.THERMAL MECHANICAL STRESS ANALYSIS OF LADLE LINING WITH INTEGRAL BRICK JOINT.Archives of Metallurgy and Materials, 2018, 63(2): 659-666.

[216]Xu, D M; Wan, X L*; Yu, J X; Xu, G; Li, G Q*.Effect of grain refinement on strain hardening and fracture in austenitic stainless steel.Materials Science and Technology, 2018, 34(11): 1344-1352.

[217]Zhou, B; Zhu, Ch; Li, G*; Luo, Z; Gao, Y; Bao, S; Schneider, J.EFFECT OF SULFUR AND ACID SOLUBLE ALUMINUM CONTENT ON PRECIPITATE AND MICROSTRUCTURE OF GRAIN-ORIENTED SILICON STEEL.Archives of Metallurgy and Materials, 2018, 63(4): 1701-1708.

[218]Zhang, Yaran; Ma, Beiyue*; Su, Chang; Yu, Jingkun; Li, Guangqiang; Zhu, Qiang.EFFECTS OF NANO-ZrO₂ ADDITIVE ON THE PHASE TRANSFORMATION AND DENSIFICATION OF ZrO₂-MgAl₂O₄ CERAMICS PREPARED BY SINGLE-STAGE SRS PROCESS.Ceramics-Silikaty, 2018, 62(1): 1-7.

[219]Yuan Lei; Ma Beiyue*; Zhu Qiang; Wang Zijing; Li Guangqiang; Yu Jingkun.Preparation and properties of MgAl₂O₄ based ceramics reinforced with rod-like microcrystallines by co-doping Sm2O₃ and La2O₃.Ceramics International, 2017, 43(18): 16258-16263.

[220]Chen Junfeng*; Li Nan*; Wei Yaowu; Han Bingqiang; Li Guangqiang; Yan Wen; Zhang Yu.Synthesis of Si3N4/SiC reaction-bonded SiC refractories: The effects of Si/C molar ratio on microstructure and properties.Ceramics International, 2017, 43(18): 16518-16524.

[221]Xiang Qiusheng; Fan Xi'an*; Han Xuewu; Zhang Chengcheng; Hu Jie; Feng Bo; Jiang Chengpeng; Li Guangqiang; Li Yawei; He Zhu.Preparation and optimization of thermoelectric properties of Bi₂Te₃ based alloys using the waste particles as raw materials from the cutting process of the zone melting crystal rods.Journal of Physics and Chemistry of Solids, 2017, 111: 34-40.

[222]Xue Ping; Li Guang qiang*; Yang Yong-xiang; Qin Qin-wei; Wei Ming-xing.Recovery of valuable metals from waste diamond cutters through ammonia-ammonium sulfate leaching.International Journal of Minerals Metallurgy and Materials, 2017, 24(12): 1352-1360.

[223]Xiang Qiusheng; Fan Xi'an*; Han Xuewu; Zhang Chengcheng; Hu Jie; Feng Bo; Jiang Chengpeng; Li Guangqiang; Li Yawei; He Zhu.Bi₂Te₃ based bulks with high figure of merit obtained from cut waste fragments of cooling crystal rods.Materials Chemistry and Physics, 2017, 201: 57-62.

[224]Liu Yu; Zhang Zhao; Li Guangqiang*; Wang Qiang; Wang Li; Li Baokuan.Evolution of Desulfurization and Characterization of Inclusions in Dual Alloy Ingot Processed by Electroslag Remelting.Steel Research International, 2017, 88(11): UNSP 1700058.

[225]Pan Zhao; Chen Jun*; Jiang Xingxing; Hu Lei; Yu Runze; Yamamoto Hajime; Ogata Takahiro; Hattori Yuichiro; Guo Fangmin; Fan Xi'an; Li Yawei; Li Guangqiang; Gu Huazhi; Ren Yang; Lin Zheshuai; Azuma Masaki; Xing Xianran.Colossal Volume Contraction in Strong Polar Perovskites of Pb(Ti,V)O-3.Journal of the American Chemical Society, 2017, 139(42): 14865-14868.

[226]Ma Beiyue*; Ren Xinming; Yin Yue; Yuan Lei; Zhang Zhan; Li Zhiqiang; Li Guangqiang; Zhu Qiang; Yu Jingkun*.Effects of processing parameters and rare earths additions on preparation of Al₂O₃-SiC composite powders from coal ash.Ceramics International, 2017, 43(15): 11830-11837.

[227]Wang Qiang; Liu Yu; Wang Fang; Li Guangqiang*; Li Baokuan; Qiao Wenwei.Numerical Study on the Effect of Electrode Polarity on Desulfurization in Direct Current Electroslag Remelting Process.Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2017, 48(5): 2649-2663.

[228]Jiang Chengpeng; Fan Xi'an*; Hu Jie; Feng Bo; Xiang Qiusheng; Li Guangqiang; Li Yawei; He Zhu.Degraded thermal stability of p-type Bi₂Te₃-based polycrystalline bulks for thermoelectric power generation at service temperature of 473 K.Journal of Materials Science: Materials in Electronics , 2017, 28(20): 15731-15738.

[229]Wang Qiang; Wang Fang; Li Guangqiang*; Gao Yunming; Li Baokuan.Simulation and experimental studies of effect of current on oxygen transfer in electroslag remelting process.International Journal of Heat and Mass Transfer, 2017, 113: 1021-1030.

[230]Zhang Bowen; Ma Beiyue*; Zhu Qiang; Li Shiming; Chen Yikun; Yu Jingkun; Li Guangqiang*.In-situ Formation and Densification of MgAl₂O₄-Y₃Al5O₁₂ and MgAl₂O₄-MgNb2O₆ Ceramics via a Single-stage SRS Process.Science of Sintering, 2017, 49(3): 285-297.

[231]Wang H H; Li G Q*; Zhao D; Ma J H; Yang J.Dephosphorization of high phosphorus oolitic hematite by acid leaching and the leaching kinetics.Hydrometallurgy, 2017, 171: 61-68.

[232]Zhang Chengcheng; Fan Xi An; Hu Jie; Jiang Chengpeng; Xiang Qiusheng; Li Guangqiang; Li Yawei; He Zhu.Changing the Band Gaps by Controlling the Distribution of Initial Particle Size to Improve the Power Factor of N-Type Bi₂Te₃ Based Polycrystalline Bulks.Advanced Engineering Materials, 2017, 19(8): 1600696.

[233]Feng Bo; Li Guangqiang; Hou Yanhui; Zhang Chengcheng; Jiang Chengpeng; Hu Jie; Xiang Qiusheng; Li Yawei; He Zhu; Fan Xi'an*.Enhanced thermoelectric properties of Sb-doped BiCuSeO due to decreased band gap.Journal of Alloys and Compounds, 2017, 712: 386-393.

[234]Hu Jie; Fan Xi'an*; Zhang Chengcheng; Jiang Chengpeng; Feng Bo; Xiang Qiusheng; Li Guangqiang; He Zhu; Li Yawei.The initial powder-refinement-induced donor-like effect and nonlinear change of thermoelectric performance for Bi₂Te₃-based polycrystalline bulks.Semiconductor Science and Technology, 2017, 32(7): 075004.

[235]Wang Jian; Fan Xi'an; Wu Zhaoyang; Li Guangqiang.Regulation and control of insulated layers for intergranular insulated Fe/SiO₂ soft magnetic composites.Journal of Materials Science, 2017, 52(12): 7091-7099.

[236]Liu Yu; Zhang Zhao; Li Guangqiang*; Wang Qiang; Wang Li; Li Baokuan.Effect of Current on Structure and Macrosegregation in Dual Alloy Ingot Processed by Electroslag Remelting.Metals, 2017, 7(6): 185.

[237]Yuan Lei; Ma Beiyue*; Du Yulong; Li Guangqiang; Zhu Qiang; Yu Jingkun.Characterization and properties of ZrO₂-forsterite composites from zircon and magnesite via reaction sintering.Journal of Ceramic Processing Research, 2017, 18(5): 352-356.

[238]Wang Qiang; Li Guangqiang*; Gao Yunming; He Zhu; Li Baokuan.A coupled mathematical model and experimental validation of oxygen transport behavior in the electro-slag refining process.Journal of Applied Electrochemistry, 2017, 47(4): 445-456.

[239]Xu, D. M.; Li, G. Q.; Wan, X. L.*; Xiong, R. L.; Xu, G.; Wu, K. M.; Somani, M. C.; Misra, R. D. K.Deformation behavior of high yield strength - High ductility ultrafine-grained 316LN austenitic stainless steel.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2017, 688: 407-415.

[240]Wang, Qiang; Li, Guangqiang*; He, Zhu; Li, Baokuan.A three-phase comprehensive mathematical model of desulfurization in electroslag remelting process.Applied Thermal Engineering, 2017, 114: 874-886.

[241]Schneider, Juergen*; Li, Guangqiang; Franke, Armin; Zhou, Bowen.Evolution of microstructure at hot band annealing of ferritic FeSi steels.Journal of Magnetism and Magnetic Materials, 2017, 424: 26-32.

[242]Jiang, Chengpeng; Fan, Xi'an; Feng, Bo; Hu, Jie; Xiang, Qiusheng; Li, Guangqiang; Li, Yawei; He, Zhu; Fan, X*.Thermal stability of p-type polycrystalline Bi₂Te₃-based bulks for the application on thermoelectric power generation.Journal of Alloys and Compounds, 2017, 692: 885-891.

[243]Wang, Qiang; He, Zhu; Li, Guangqiang*; Li, Baokuan; Zhu, Chengyi; Chen, Pengju.Numerical investigation of desulfurization behavior in electroslag remelting process.International Journal of Heat and Mass Transfer, 2017, 104: 943-951.

[244]Qiang Wang; Guangqiang Li; Baokuan Li.(S023 )A three-phase comprehensive mathematical model of desulfurization in electroslag remelting process.材料とプロセス, 2017, 30(2 TN.174): 617-617.

[245]Chen Peng ju; Zhu Cheng yi*; Li Guang qiang; Dong Ya wen; Zhang Zhi cheng.Effect of Sulphur Concentration on Precipitation Behaviors of MnS-containing Inclusions in GCr15 Bearing Steels after LF Refining.ISIJ International, 2017, 57(6): 1019-1028.

[246]Liu Yu; Li Guangqiang; Wan Xiangliang*; Wang Honghong; Wu Kaiming; Misra R D K.The role of Cu and Al addition on the microstructure and fracture characteristics in the simulated coarse-grained heat-affected zone of high-strength low-alloy steels with superior toughness.Materials Science and Technology, 2017, 33(15): 1750-1764.

[247]Hou Ruogu; Zhu Chengyi; Li Guangqiang; Zhou Bowen; Jia Juan.Effect of Niobium on Precipitates and Texture Evolution of Fe-3% Si Grain-oriented Electrical Steel Annealed Hot Band.ISIJ International, 2017, 57(12): 2245-2254.

[248]Wang H H; Li G Q*; Ma J H; Zhao D.The stability, characteristics and magnetic properties of iron carbide from an oolitic hematite.RSC Advances, 2017, 7(70): 44456-44462.

[249]Zhao Dong; Li Guangqiang*; Wang Henghui; Ma Jianghua.Slag/Metal Separation from H-2-Reduced High Phosphorus Oolitic Hematite.ISIJ International, 2017, 57(12): 2131-2140.

[250]Feng Bo*; Li Guangqiang*; Zhang Chengcheng*; Li Yawei*; He Zhu*; Fan Xi'an*.Review of BiCuSeO-based Thermoelectric Materials for Thermoelectric Generation.Cailiao Daobao/Materials Review, 2017, 31(11): 24-31 and 45.

[251]Yin Yue; Ma Beiyue; Zhang Bowen; Li Shiming; Yu Jingkun; Zhang Zhan; Li Guangqiang*.Effect of La₂O₃Addition on Synthesis of Al₂O₃-SiC Composite Powders from Fly Ash.Cailiao Daobao/Materials Review, 2017, 31(2): 111-114 and 120.

[252]Wang, H. H.; Li, G. Q.; Wan, X. L.*; Wang, H. H.; Nune, K. C.; Li, Y.; Wu, K. M.Microstructural characteristics and impact toughness in YS690MPa steel weld metal for offshore structures.Science and Technology of Welding and Joining, 2017, 22(2): 133-142.

[253]Wang, Henghui; Li, Guangqiang*; Ma, Jianghua; Zhao, Dong.The effect of methane decomposition on the formation and magnetic properties of iron carbide prepared from oolitic hematite.RSC Advances, 2017, 7(7): 3921-3927.

[254]Wan, X.; Zhou, B.; Nune, K. C.; Li, Y.; Wu, K.; Li, G.*.In-situ microscopy study of grain refinement in the simulated heat-affected zone of high-strength low-alloy steel by TiN particle.Science and Technology of Welding and Joining, 2017, 22(4): 343-352.

[255]Wang, Qiang; Liu, Yu; He, Zhu; Li, Guangqiang*; Li, Baokuan.Numerical Analysis of Effect of Current on Desulfurization in Electroslag Remelting Process.ISIJ International, 2017, 57(2): 329-336.

[256]Yin, Yue; Ma, Beiyue*; Li, Shiming; Zhang, Bowen; Yu, Jingkun*; Zhang, Zhan; Li, Guangqiang.Synthesis of Al₂O₃-SiC composite powders from coal ash in NaCl-KCl molten salts medium.Ceramics International, 2016, 42(16): 19225-19230.

[257]Zhou Bowen; Zhu Chengyi; Li Guangqiang; Wan Xiangliang; Schneider Juergen.Effect of Acid-Soluble Aluminum Content on Precipitates and Microstructure of Annealed Hot-Rolled Grain-Oriented Silicon Steel.Steel Research International, 2016, 87(12): 1702-1714.

[258]Liu Yu; Zhang Zhao; Li Guangqiang*; Wang Qiang; Wang Li; Li Baokuan.The Structural Evolution and Segregation in a Dual Alloy Ingot Processed by Electroslag Remelting.Metals, 2016, 6(12): 325.

[259]Rong, Zhenzhou; Fan, Xi'an*; Yang, Fan; Cai, Xinzhi; Han, Xuewu; Li, Guangqiang.Microwave activated hot pressing: A new opportunity to improve the thermoelectric properties of n-type Bi₂Te₃-xSex bulks.Materials Research Bulletin, 2016, 83: 122-127.

[260]Hou, Yanhui; Zheng, Wan; Wu, Zhenhua; Li, Guangqiang*; Moelans, Nele*; Guo, Muxing; Khan, Babar Shahzad.Study of Mn absorption by complex oxide inclusions in Al-Ti-Mg killed steels.Acta Materialia, 2016, 118: 8-16.

[261]Zhang, Cheng Cheng; Fan, Xi An*; Hu, Jie; Jiang, Cheng Peng; Feng, Bo; Xiang, Qiu Sheng; Li, Guang Qiang; Li, Ya Wei.The Effect of Porosity and Milling Induced Defects on the Thermoelectric Properties of p-Type Bi₂Te₃-Based Bulks.Advanced Engineering Materials, 2016, 18(10): 1777-1784.

[262]Han, Xuewu; Fan, Xi'an*; Zhang, Chengcheng; Cai, Xinzhi; Rong, Zhenzhou; Li, Guangqiang.Pushing the optimal ZT values of p-type Bi_2-xSb_xTe₃ alloys to a higher temperature by expanding band gaps and suppressing intrinsic excitation.Journal of Materials Science: Materials in Electronics , 2016, 27(9): 8923-8929.

[263]Zhang, Li*; Zhang, Wu; Zhang, Ju-hua; Li, Guang-qiang.Effects of additives on the phase transformation, occurrence state, and the interface of the Ti component in Ti-bearing blast furnace slag.International Journal of Minerals Metallurgy and Materials, 2016, 23(9): 1029-1040.

[264]Henghui Wang; Guangqiang Li*; Jian Yang; Jianghua Ma; Babar Shazad Khan.The behavior of phosphorus during reduction and carburization of high-phosphorus oolitic hematite with H₂ and CH4.Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2016, 47(4): 2572-2581.

[265]Chai, Zhinan; Ding, Jun*; Deng, Chengji; Zhu, Hongxi; Li, Guangqiang; Yu, Chao.Ni-catalyzed synthesis of hexagonal plate-like alpha silicon nitride from nitridation of Si powder in molten salt media.Advanced Powder Technology, 2016, 27(4): 1637-1644.

[266]Wang, Jian; Fan, Xi'an*; Wu, Zhaoyang; Li, Guangqiang.Intergranular insulated Fe/SiO₂ soft magnetic composite for decreased core loss.Advanced Powder Technology, 2016, 27(4): 1189-1194.

[267]Wang, Qiang*; He, Zhu; Li, Guangqiang; Li, Baokuan.Numerical investigation on species transport in electroslag remelting dual alloy ingot.Applied Thermal Engineering, 2016, 103: 419-427.

[268]Zhang, Li*; Zhang, Wu; Zhang, Juhua; Li, Guangqiang.Oxidation Kinetics and Oxygen Capacity of Ti-Bearing Blast Furnace Slag under Dynamic Oxidation Conditions.Metals, 2016, 6(5): 105.

[269]Pan, Luwei; Dai, Fangqin*; Huang, Panning; Liu, Shuang; Li, Guangqiang.Study of the effect of mineral matters on the thermal decomposition of Jimsar oil shale using TG-MS.Thermochimica Acta, 2016, 627: 31-38.

[270]Zhou, Bowen; Li, Guangqiang; Wan, Xiangliang*; Li, Yu; Wu, Kaiming.In-Situ Observation of Grain Refinement in the Simulated Heat-Affected Zone of High-Strength Low-Alloy Steel by Zr-Ti Combined Deoxidation.Metals and Materials International, 2016, 22(2): 267-275.

[271]Jun Ding; Hongxi Zhu; Guangqiang Li; Chengji Deng; Zhinan Chai.Catalyst-assisted synthesis of α-Si3N4 in molten salt.Ceramics International, 2016, 42(2, Part A): 2892-2898.

[272]X.A. Fan; Z.Y. Wu; G.Q. Li; J. Wang; Z.D. Xiang; Z.H. Gan.High resistivity and low core loss of intergranular insulated Fe–6.5 wt.%Si/SiO₂ composite compacts.Materials and Design, 2016, 89: 1251-1258.

[273]Ma, Beiyue*; Yin, Yue; Zhu, Qiang; Zhai, Yingying; Li, Ying*; Li, Guangqiang; Yu, Jingkun.Slag Corrosion and Penetration Behaviors of MgAl₂O₄ and Al₂O₃ Based Refractories.Refractories and Industrial Ceramics, 2016, 56(5): 494-501.

[274]Xi′an Fan; Xin zhi Cai; Xue wu Han; Cheng cheng Zhang; Zhen zhou Rong; Fan Yang; Guang qiang Li.Evolution of thermoelectric performance for (Bi,Sb)₂Te₃ alloys from cutting waste powders to bulks with high figure of merit.Journal of Solid State Chemistry, 2016, 233: 186-193.

[275]Zhang B.; Ma B.*; Yin Y.; Li S.; Zhang Z.; Li G.; Yu J.Phase formation and process analysis of SiC-Al₂O₃-Al₆Si₂O₁₃ composite powder via carbothermal reduction of fly ash at 1 550 °C.China's Refractories, 2016, 25(4): 33-37.

[276]Liu Y.; Li G.-Q.*; Yang Z.-Z.; Rao J.-P.Effects of tundish gunning materials on steel cleanliness.Guocheng Gongcheng Xuebao/The Chinese Journal of Process Engineering, 2016, 16(2): 303-309.

[277]Wan Xiang-Liang; Li Guang-Qiang; Wu Kai-Ming.Microstructure characteristics and formation mechanism of acicular ferrite in high-strength low-alloy steels.Journal of Iron and Steel Research, 2016, 28(6): 1-12.

[278]ZHANG Bowen; MA Beiyue; YIN Yue; LI Shiming; ZHANG Zhan; LI Guangqiang; YU Jingkun.Phase Formation and Process Analysis of SiC-Al₂O₃-Al6Si2O13 Composite Powder via Carbothermal Reduction of Fly Ash at 1 550 ℃C.中國耐火材料(英文版), 2016, 25(4): 33-37.

[279]Zhu Cheng yi; Chen Peng ju; Li Guang qiang*; Luo Xiao yan; Zheng Wan.A Mathematical Model of Desulphurization Kinetics for Ultra-low-sulfur Steels Refining by Powder Injection during RH Processing.ISIJ International, 2016, 56(8): 1368-1377.

[280]Chen Xianhong; Zhu Chengyi; Li Guangqiang; Fu Yong*.Influence of niobium and chromium on the high temperature microstructure evolution and behaviors of inhibitors of as-cast grain-oriented silicon steel.Cailiao Daobao/Materials Review, 2016, 30: 94-102.

[281]Wan, Xiang-Liang; Li, Guang-Qiang*; Zhou, Bo-Wen; Ma, Jiang-Hua.Effect of grain refinement on deformation mechanism and mechanical properties of austenitic stainless steel.Journal of Materials Engineering, 2016, 44(8): 29-33.

[282]Zhou B; Zhu C; Li G*; Fu Y.Effect of sulphur and acid soluble aluminium content on grain oriented silicon steel.Materials Science and Technology, 2015, 31(15): 1809-1817.

[283]Xi’an Fan; Jian Wang; Zhaoyang Wu; Guangqiang Li.Core–shell structured FeSiAl/SiO₂ particles and Fe₃Si/Al₂O₃ soft magnetic composite cores with tunable insulating layer thicknesses.Materials Science and Engineering B-Solid State Materials for Advanced Technology, 2015.

[284]Jian Wang; Xi’an Fan; Zhaoyang Wu; Guangqiang Li.Synthesis, microstructure and magnetic properties of Fe₃Si_0.7Al_0.3@SiO₂ core-shell particles and Fe₃Si/Al₂O₃ soft magnetic composite core.Journal of Solid State Chemistry, 2015.

[285]Zhang, Jianyi; Fan, Xi'An*; Lu, Lei; Hu, Xiaoming; Li, Guangqiang.Ferrites based infrared radiation coatings with high emissivity and high thermal shock resistance and their application on energy-saving kettle.Applied Surface Science, 2015, 344: 223-229.

[286]Luwei Pan; Fangqin Dai; Guangqiang Li; Shuang Liu.A TGA/DTA-MS investigation to the influence of process conditions on the pyrolysis of Jimsar oil shale.Energy, 2015.

[287]Fan, Xi'an*; Yang, Fan; Rong, Zhenzhou; Cai, Xinzhi; Li, Guangqiang.Characterization and thermoelectric properties of Bi_0.4Sb_1.6Te₃ nanostructured bulk prepared by mechanical alloying and microwave activated hot pressing.Ceramics International, 2015, 41(5, Part B): 6817-6823.

[288]Jun Ding; Hongxi Zhu; Chengji Deng; Guangqiang Li; Kanglei Wang; Jianpeng Liu.Preparation and characterisation of porous biomorphic SiC/C ceramic from molten salt.Ceramics International, 2015.

[289]Fan, Xi'An*; Rong, Zhenzhou; Yang, Fan; Cai, Xinzhi; Han, Xuewu; Li, Guangqiang.Effect of process parameters of microwave activated hot pressing on the microstructure and thermoelectric properties of Bi₂Te₃-based alloys.Journal of Alloys and Compounds, 2015, 630: 282-287.

[290]Wang J.; Li G.-Q.; Yang X.-P.; He Z.; Li B.-K.Change of slag composition during electroslag remelting process and prediction of the dissolved oxygen content in steel.Journal of Iron and Steel Research, 2015, 27(6): 18-23.

[291]Ma B Y*; Yin Y; Li Y; Liu G Q; Huang W L; Chen Z; Li G Q; Yu J K.Facile synthesis of MgAl₂O₄with high crystallinity from KCL–MgCl2composite molten salts.Materials Research Innovations, 2015, 20(6): 415-420.

[292]Wan, Xiang-Liang; Li, Guang-Qiang*; Zhou, Bo-Wen; Ma, Jiang-Hua; Xu, Guang.Deformation mechanism and strain hardening behavior of micrometer/nanometer scale austenitic stainless steel.Transactions of Materials and Heat Treatment, 2015, 36(11): 72-78.

[293]Ma, Beiyue; Yin, Yue; Zhu, Qiang; Li, Ying; Li, Guangqiang; Yu, Jingkun.In-situ formation and densification of MgAl₂O₄-SmAlO₃ceramics by a single-stage reaction sintering process.Ceramics-Silikaty, 2015, 59(2): 109-114.

[294]Wu, Z.Y.; Fan, X.A.*; Li, G.Q.; Wang, J.; Gan, Z.H.Intergranular insulated Fe-6.5 wt% Si/SiO₂ composite compacts with tunable insulating layer thickness for low core loss applications.RSC Advances, 2015, 5(82): 67031-67040.

[295]Wu, Zhenhua; Zheng, Wan; Li, Guangqiang*; Matsuura, Hiroyuki; Tsukihashi, Fumitaka.Effect of Inclusions Behavior on the Microstructure in Al-Ti Deoxidized and Magnesium-Treated Steel with Different Aluminum Contents.Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2015, 46(3): 1226-1241.

[296]Zhaoyang Wu; Xi’an Fan; Jian Wang; Guangqiang Li; Zhanghua Gan; Zhan Zhang.Core loss reduction in Fe–6.5 wt.%Si/SiO₂ core–shell composites by ball milling coating and spark plasma sintering.Journal of Alloys and Compounds, 2014, 617: 21-28.

[297]Yang, Fan*; Fan, Xi An; Rong, Zhen Zhou; Cai, Xin Zhi; Li, Guang Qiang.Lattice Thermal Conductivity Reduction Due to In Situ-Generated Nano-Phase in Bi_0.4Sb_1.6Te₃ Alloys by Microwave-Activated Hot Pressing.Journal of Electronic Materials, 2014, 43(11): 4327-4334.

[298]Zhenzhou Rong; Xi'an Fan; Fan Yang; Xinzhi Cai; Guangqiang Li.Microwave activated hot pressing: A new consolidation technique and its application to fine crystal bismuth telluride based compounds.Powder Technology, 2014, 267: 119-125.

[299]Lu, Lei; Fan, Xi'an*; Zhang, Jianyi; Hu, Xiaoming; Li, Guangqiang; Zhang, Zhan.Evolution of structure and infrared radiation properties for ferrite-based amorphous coating.Applied Surface Science, 2014, 316: 82-87.

[300]Jun Ding; Hongxi Zhu; Guangqiang Li; Chengji Deng; Jun Li.Growth of SiC nanowires on wooden template surface using molten salt media.Applied Surface Science, 2014, 617: 21-28.

[301]Fan, Xi'an*; Cai, Xinzhi; Rong, Zhenzhou; Yang, Fan; Li, Guangqiang; Gan, Zhanghua.Resistance pressing sintering: A simple, economical and practical technique and its application to p-type (Bi,Sb)₂Te₃ thermoelectric materials.Journal of Alloys and Compounds, 2014, 607: 91-98.

[302]Wu, Zhaoyang; Fan, Xi'an*; Li, Guangqiang; Gan, Zhanghua; Wang, Jian; Zhang, Zhan.Evolution from amorphous to nanocrystalline and corresponding magnetic properties of Fe-Si-B-Cu-Nb alloys by melt spinning and spark plasma sintering.Materials Science and Engineering B-Solid State Materials for Advanced Technology, 2014, 187: 61-66.

[303]Zheng, Wan; Wu, Zhen-hua; Li, Guang-qiang*; Zhang, Zhan; Zhu, Cheng-yi.Effect of Al Content on the Characteristics of Inclusions in Al–Ti Complex Deoxidized Steel with Calcium Treatment.ISIJ International, 2014, 54(8): 1755-1764.

[304]Li G*; Guo M.Current Development of Slag Valorisation in China.Waste and Biomass Valorization, 2014, 5(3): 317-325.

[305]Xian Hong Chen; Chen Yi Zhu; Li Deng; Guang Qiang Li.Precipitation Behavior of the Second Phase Particles in Grain Oriented Silicon Steel Slabs under Different Reheating Conditions.Advanced Materials Research, 2014, 906: 268-274.

[306]Wang, Heng-Hui; Wan, Xiang-Liang*; Li, Guang-Qiang; Wang, Hong-Hong; Wu, Kai-Ming.Interlocked microstructure of acicular ferrite and properties of high strength low alloy steel weld metal.Transactions of Materials and Heat Treatment, 2014, 35(12): 114-120.

[307]Cai, Xinzhi; Fan, Xi'An; Rong, Zhenzhou; Yang, Fan; Gan, Zhanghua; Li, Guangqiang.Improved thermoelectric properties of Bi₂Te_3-xSe_x alloys by melt spinning and resistance pressing sintering.Journal of Physics D: Applied Physics , 2014, 47(11).

[308]Zhang, Z.*; Xiao, Y.; Voncken, J.H.L.; Yang, Y.; Boom, R.; Wang, N.; Zou, Z.; Li, G.Phase equilibria in the CaOSiO₂Na₂OSiO₂Na₂OAl₂O₃·6SiO₂ system.Journal of the European Ceramic Society, 2014, 34(2): 533-539.

[309]Feng ZHANG*; Guang-qiang LI.Control of Ultra Low Titanium in Ultra Low Carbon Al-Si Killed Steel.Journal of Iron and Steel Research International, 2013, 20(4): 20-25.

[310]Liu He-Li; Li Guang-Qiang; Li Yong-Jun; Zhu Cheng-Yi; Zhang Fan; Guo Mu-Xing; Chen Zhao-Ping.Non-aqueous electrolysis separation of Ti and Nb bearing inclusions in ultra-pure ferritic stainless steel and analysis of their precipitation behavior.Guocheng Gongcheng Xuebao/The Chinese Journal of Process Engineering, 2013, 13(1): 33-40.

[311]Su Li-Juan; Li Guang-Qiang*; Li Wei; Yuan Gang; Li Peng; Chen Zhao-Ping.Dissolution of Al₂O₃ in VOD refining slag.Guocheng Gongcheng Xuebao/The Chinese Journal of Process Engineering, 2013, 13(2): 230-235.

[312]Zhang, Feng*; Li, Guang-Qiang; Zhu, Cheng-Yi.Heredity characters of inclusions and electromagnetic properties of non-oriented silicon steel treated by rare earth alloy.功能材料, 2013, 44(7): 1029-1033.

[313]Fan, Xi-An*; Hong, Xiao-Jie; Wu, Zhao-Yang; Zhu, Cheng-Yi; Li, Guang-Qiang; Hou, Yan-Hui.Preparation, microstructure control and thermoelectric properties of one dimension Bi₂Te₃ based nano-materials.Journal of Functional Materials, 2013, 44(3): 305.

[314]Li, Guangqiang; Zhu, Chengyi; Li, Yongjun; Huang, Xiongyuan; Chen, Min.The Effect of Na₂O and k₂O on the Partition Ratio of Phosphorus between CaO-SiO₂-Fe_tO-P₂O₅ Slag and Carbon-Saturated Iron.Steel Research International, 2013, 84(7): 687-694.

[315]Wu, Chao-Yang; Fan, Xi-An*; Li, Guang-Qiang; Gan, Zhang-Hua; Lu, Lei; Cai, Xin-Zhi.Preparation and magnetic properties of 6.5%Si steel iron core with core-shell structure.Journal of Functional Materials, 2013, 44(10): 1431-1436.

[316]Zhang, L.*; Zhang, J. H.; Zhang, W.; Li, G. Q.Thermodynamic analysis of extraction of synthetic rutile from modified slag.Industrial & Engineering Chemistry Research, 2013, 52(13): 4924-4931.

[317]Wu, Jun*; Li, Taotao; Qi, Ting; Qin, Qingwei; Li, Guangqiang; Zhu, Bailin; Wu, Run; Xie, Changsheng.Influence of Dopants on Electrical Properties of ZnO-V₂O₅ Varistors Deduced from AC Impedance and Variable-Temperature Dielectric Spectroscopy.Journal of Electronic Materials, 2012, 41(7): 1970-1977.

[318]Fu Jie*; Li Guangqiang; Mao Xinping; Fang Keming.Nanoscale Cementite Precipitates and Comprehensive Strengthening Mechanism of Steel.Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2011, 42A(12): 3797-3812.

[319]Wang Jianfeng; Li Guangqiang*; Xiao Aida.A Bainite-Ferrite Multi-Phase Steel Strengthened by Ti-Microalloying.Materials Transactions, 2011, 52(11): 2027-2031.

[320]Zhang Li*; Li Guang qiang; Zhang Wu.Synthesis of rutile from high titania slag by pyrometallurgical route.Transactions of Nonferrous Metals Society of China, 2011, 21(10): 2317-2322.

[321]Hou Yanhui*; Li Guangqiang; Liu Zhiyi; Fan Xi'an.Study on the Strengthening Mechanism of Al-Cu-Mg-Ag Alloy with the Valence Electron Structures and Atomic Bonding of Precipitates.Rare Metal Materials and Engineering, 2011, 40(3): 407-412.

[322]Fan, X. A.*; Li, G. Q.; Zhong, W.; Duan, X. K.; Yang, J. Y.Effect of Nanopowders Addition on the Thermoelectric Properties of n-Type Bi₂Te₃ Nanocomposites.Integrated Ferroelectrics, 2011, 128: 1-7.

[323]Xiao Ai da*; Wen De zhi; Li Guang qiang; Wang Jian feng.Development of CSP Mold Powder for Casting High-Ti Micro-Alloyed Steel in Lianyuan Steel.Journal of Iron and Steel Research International, 2009, 16: 270-274.

[324]Ni Hong-wei; He Hang; Li Guang-qiang; Liu Jing.Preparation of nanocrystalline 430L stainless steel by HEBMM and SPS.Journal of Iron and Steel Research International, 2008, 15(4): 73-76.

[325]Zhu, Cheng-yi; Li, Guang-qiang; Chen, Zhao-ping; Ma, Guo-jun; Liu, Jun.Manganese distribution equilibrium between CaO-Fe_tO-SiO₂-MnO-P₂O₅-(Al₂O₃) slags and carbon saturated iron.ISIJ International, 2008, 48(2): 123-129.

[326]Zhu Cheng yi*; Li Guang qiang; Qin Qing wei; Ma Guo jun.Thermodynamic principle and properties of electroplated RE-Ni-W-P-B₄C composite coatings.Transactions of Nonferrous Metals Society of China, 2007, 17: S878-S885.

[327]Liu Jing; Li Guang-qiang; Peng Bing; Mang Xin.Effect of nitrogen on structure and properties of ultra-fine austenitic stainless steel.Journal of Iron and Steel Research International, 2007, 14: 310-315.

[328]Zhang, L.; Zhang, L. N.; Wang, M. Y.; Li, G. Q.; Sui, Z. T.Precipitation selectivity of perovskite phase from Ti-bearing blast furnace slag under dynamic oxidation conditions.Journal of Non-Crystalline Solids, 2007, 353(22-23): 2214-2220.

[329]Zhang, L.; Zhang, L. N.; Wang, M. Y.; Li, G. Q.; Sui, Z. T.Recovery of titanium compounds from molten Ti-bearing blast furnace slag under the dynamic oxidation condition.Minerals Engineering, 2007, 20(7): 684-693.

[330]Zhu, Cheng-Yi; Li, Guang-Qiang; Qin, Qing-Wei.Progress in electric arc furnace steelmaking dust treatment.Guocheng Gongcheng Xuebao/The Chinese Journal of Process Engineering, 2006, 6(SPPL. 1): 133-138.

[331]Li, Guangqiang; Ma, Jianghua; Ni, Hongwei; Shen, Qiaozhen; Tsukihashi, Fumitaka.Influences of oxide additions on formation reaction of iron carbide at 1023 K.ISIJ International, 2006, 46(7): 981-986.

[332]Zhang, L; Zhang, LN; Wang, MY; Li, GQ; Sui, ZT.Dynamic oxidation of the Ti-bearing blast furnace slag.ISIJ International, 2006, 46(3): 458-465.

[333]Zhang, Li; Zhang, Linnan; Wang, Mingyu; Li, Guangqiang; Sui, Zhitong.Dynamic oxidation of the Ti-bearing blast furnace.ISIJ International, 2006, 46(3): 458-465.

[334]Li, GQ; Hamano, T; Tsukihashi, F.The effect of Na₂O and Al₂O₃ on dephosphorization of molten steel by high basicity MgO saturated CaO-FeOx-SiO₂ slag.ISIJ International, 2005, 45(1): 12-18.

[335]Zhang, Wen-wen; Zheng, Wan*; Yan, Wen; Li, Guang-qiang.Formation mechanism of interface reaction layer between microporous magnesia refractories and molten steel and its effect on steel cleanliness.Journal of Iron and Steel Research International.

[336]Hou, Yan-hui*; Xu, Ze-kun; Li, Guang-qiang*.Effect of trace boron on corrosion resistance of rust layer of high-strength low-alloy steel in 3.5 wt.% NaCl solution.Journal of Iron and Steel Research International.

[337]Han, Lei; Chen, Yu; Zhang, Haijun*; Li, Guangqiang; Jia, Quanli; Zhang, Shaowei*.Low-temperature synthesis of six-principal-component high-entropy transition-metal carbide aerogel thermal insulator.Journal of the American Ceramic Society.

[338]Zhang, Jinshuai; Li, Guangqiang*; Wang, Honghong*; Wan, Xiangliang; Hu, Mingfeng; Cao, Yulong.Evolution of inclusions in novel cryogenic high-Mn austenitic steel weld metal with cerium addition.Science and Technology of Welding and Joining.

[339]Huo, Yan-zhu; Gu, Hua-zhi; Huang, Ao*; Ma, Bei-yue*; Chen, Liu-gang*; Li, Guang-qiang; Li, Ya-wei.Characterization and mechanism of dissolution behavior of Al₂O₃/MgO oxides in molten slags.Journal of Iron and Steel Research International.

[340]Liu, Wenke; Qin, Qingwei; Zhang, Hailin; Chen, Xing; Luo, Ling; Li, Guangqiang; Zheng, Shili; Li, Ping*.Novel Technology for the Removal of Fe and Al from Spent Li-Ion Battery Leaching Solutions by a Precipitation-Complexation Process.ACS Sustainable Chemistry and Engineering.

[341]Hou, Yanhui; Zhou, Shilong; Li, Guangqiang*; Moelans, Nele*.Study on the Occurrence State of Lanthanum in Rust Layer and Mechanism of Its Influence on Invasion State of Corrosion Atoms.Steel Research International, 2200166.

[342]Yuan, Cheng; Liu, Yu*; Li, Guang-qiang*; Zou, Yong-shun; Huang, Ao.Interaction between microporous magnesia castable and 38CrMoAl steel.Journal of Iron and Steel Research International.

[343]Zhang, Jinshuai; Li, Guangqiang*; Wang, Honghong*; Wan, Xiangliang; Hu, Mingfeng; Meng, Qingrun.The effect of non-metallic inclusions in refining microstructure and improving cryogenic toughness of novel high-Mn steel weld metals for LNG tanks.Welding in the World.

[344]Wu, Lei; Hu, Chengyang*; Ke, Rui; Misra, Raja Devesh Kumar; Zhong, Ming; Li, Guangqiang; Xu, Deming; Wan, Xiangliang*; Wu, Kaiming.Insights into the Plasticization Mechanism in Different 18Cr-8Ni Austenitic Stainless Steel: Study of the Phase Reverted Structure Versus Cold-Deformed Structure.Steel Research International, 2200122.

[345]Chen, Qianlin; Yan, Wen*; Yan, Junjie*; Schaffoener, Stefan; Chen, Zhe; Ma, Sanbao; Li, Guangqiang.Microstructures and strengths of microporous MgO-Al₂O₃ ceramics from Al(OH)(3) and calcined magnesite.Journal of the American Ceramic Society.

[346]Zhu, Chengyi; Liu, Yulong; Xiao, Ying; Yan, Wen; Li, Guangqiang*.A New Review on Inclusion and Precipitate Control in Grain-Oriented Silicon Steels.JOM.

[347]Liu, Chang; Xiao, Aida; He, Zhu; Yan, Wen; Li, Guangqiang; Wang, Qiang*.Numerical Investigation on Motion and Removal of Inclusions in Continuous Casting Tundish with Multiorifice Filter.Steel Research International, 2100818.

[348]Zhang, Jinshuai; Li, Guangqiang*; Wang, Honghong*; Wan, Xiangliang; Hu, Mingfeng; Meng, Qingrun.Microstructure, non-metallic inclusions and impact toughness of high-Mn cryogenic steel weld metal.Science and Technology of Welding and Joining.

[349]Cao, Yulong; Ma, Chongsheng; Jiang, Zhouhua; Yan, Jiaqi; Li, Guangqiang*.Element Migration and Diffusion at the Bonding Interface of the Bimetallic Composite Billet Produced by the ESRC Method.Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science.

[350]Li, Tengfei; Li, Guangqiang; Liu, Yu*; Wang, Xijie; Tian, Yufeng.Effect of MgO on the fluoride vaporization and crystallization of CaF₂-CaO-Al₂O₃-(MgO) slag for vacuum electroslag remelting.Journal of Thermal Analysis and Calorimetry.

[351]Cao, Yulong; Dong, Yanwu*; Li, Guangqiang*; Jiang, Zhouhua; Zhao, Zhengrong.Solid-state phase transformation of ductile cast iron during electroslag remelting cladding.International Journal of Cast Metals Research.

[352]Wang, Qiang; Tan, Chong; Huang, Ao; Yan, Wen; Gu, Huazhi; He, Zhu; Li, Guangqiang*.Quantitative Characterization of Flow-Induced Erosion of Tundish Refractory Lining via Water Model Experiment and Numerical Simulation.Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science.

[353]Wang, Yong; Li, Guangqiang; Zhu, Chengyi*; Gao, Yang; Liu, Yulong; Liu, Yu.Role of Nb-bearing inhibitors in grain-oriented silicon steel manufactured by low-temperature slab reheating process.Ironmaking and Steelmaking.

[354]Lu, Ru; Li, Guangqiang; Gao, Yunming; Shi, Chengbin; Wang, Qiang*.Investigation on Desulfurization of Rejected Electrolytic Manganese Metal Scrap: Experiment and Mathematical Modeling.Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science.

[355]Wang, Qiang; Tan, Chong; Huang, Ao; Yan, Wen; Gu, Huazhi; He, Zhu; Li, Guangqiang*.Numerical Simulation on Refractory Wear and Inclusion Formation in Continuous Casting Tundish.Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science.

[356]Tan, Chong; Liu, Yu*; Li, Guangqiang*; Yuan, Cheng; Tian, Yufeng; Zou, Yongshun; Huang, Ao.Corrosion Behavior of Lightweight MgO in High Basicity Tundish Slag.Steel Research International, 2100010.

[357]Gao, Yunming*; Huang, Zhenbiao; He, Lin; Chen, George Z.; Qin, Qingwei; Li, Guangqiang.Yttria-Stabilized Zirconia Assisted Green Electrochemical Preparation of Silicon from Solid Silica in Calcium Chloride Melt.Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science.

[358]Li, Tianqing; Chen, Junfeng*; Xiao, Junli; Wei, Yaowu; Li, Guangqiang; Zhang, Shaowei*; Li, Nan*.Formation of liquid-phase isolation layer on the corroded interface of MgO/Al₂O₃-SiC-C refractory and molten steel: Role of SiC.Journal of the American Ceramic Society.

[359]Wang, Qiang; Lu, Ru; Wang, Fang; He, Zhu; Li, Guangqiang*.Numerical Study of Evaporation Behavior of Molten Manganese Metal During Electroslag Recycling Process.Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science.

[360]Wang, Qiang; Liu, Yu; Huang, Ao; Yan, Wen; Gu, Huazhi; Li, Guangqiang*.CFD Investigation of Effect of Multi-hole Ceramic Filter on Inclusion Removal in a Two-Strand Tundish.Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science.

發表中文期刊論文：

[1]張嘉欣, 李光強, 張蓬朝, 田雨豐, 劉昱. 轉爐碳磷氧化轉折溫度的熱力學模型[J]. 煉鋼, 2024, 40 (03): 8-14+26.

[2]曹玉龍, 張賽康, 汪秀秀, 馬崇圣, 李光強. 加熱溫度對高釩高速鋼中M₂C碳化物分解轉變行為的影響[J]. 特殊鋼, 1-7.

[3]王智慧, 吳雷, 姜懿珊, 張弦, 萬響亮, 李光強, 吳開明. 形變強化和逆相變細晶強化對Fe-18Cr-8Ni鋼耐腐蝕性能的影響[J]. 中國腐蝕與防護學報, 2024, 44 (02): 429-436.

[4]潘胡江, 楊新明, 李光強, 楊治爭, 霍旭東. Ti微合金化對高錳鋼組織和性能的影響[J]. 特殊鋼, 2024, 45 (02): 74-78.

[5]吳德進, 王慧智, 李光強, 楊治爭, 劉昱. 微合金化對40Cr25Ni20Si2耐熱鋼性能影響的研究[J]. 鑄造工程, 2024, 48 (01): 26-30.

[6]尹天驊, 李光強, 馬江華, 袁文來. 火法制備硫化亞錫的反應機理與產物穩定性研究[J]. 武漢科技大學學報, 2024, 47 (01): 11-19.

[7]張惠榮, 鄭萬, 劉鵬, 張文文, 李光強, 劉靜. 稀土及熱處理對GCr15軸承鋼中夾雜物特征的影響[J]. 煉鋼, 2023, 39 (06): 74-83.

[8]胡明峰, 李光強, 張金帥, 王紅鴻, 萬響亮, 曹玉龍. La含量對高錳奧氏體鋼焊縫金屬微觀組織及力學性能的影響[J]. 武漢科技大學學報, 2023, 46 (05): 321-329.

[9]李嘉維, 李光強, 曹玉龍, 馬崇圣. 電渣熔焊制備不銹鋼/碳鋼復合板的組織與性能研究[J]. 武漢科技大學學報, 2023, 46 (05): 330-337.

[10]史先菊, 李光強, 劉暢, 李軍, 趙毓偉, 王強. 燒結用鐵礦粉制粒性能影響因素的試驗研究[J]. 燒結球團, 2023, 48 (04): 30-37+80.

[11]劉曉航, 王肸杰, 劉暢, 賀鑄, 李光強, 王強. 基于BP神經網絡的鋼包渣眼演化行為的預測[J]. 鋼鐵研究學報, 2024, 36 (04): 469-480.

[12]李斯博, 萬響亮, 董志超, 胡鋒, 周松波, 楊疊, 李光強, 吳開明. 線能量對超高強度海工鋼熱影響區組織演變與韌性的影響[J]. 材料熱處理學報, 2023, 44 (06): 109-119.

[13]易禮偉, 田雨豐, 劉暢, 賀鑄, 李光強, 王強. 頂底復吹轉爐石灰溶解行為的數值模擬[J]. 鋼鐵研究學報, 2023, 35 (11): 1339-1346.

[14]孟澤, 李光強, 李騰飛, 鄭慶, 曾斌, 劉昱. Ce對75Cr1鋼潔凈度、組織與耐點蝕性影響[J]. 金屬學報, 1-11.

[15]程遠遙, 趙剛, 許德明, 毛新平, 李光強. 奧氏體化溫度對Si-Mn鋼熱軋板淬火-配分處理后顯微組織和力學性能的影響[J]. 金屬學報, 2023, 59 (03): 413-423.

[16]孟澤, 李光強, 趙一將, 鄭慶, 曾斌, 劉昱. La-Ce處理對75Cr1鋼夾雜物和耐蝕性影響的工業試驗[J]. 鋼鐵, 2023, 58 (06): 110-117+133.

[17]肖穎, 朱誠意, 劉玉龍, 高洋, 郭小龍, 李光強. Nb含量對取向硅鋼抑制劑析出行為和組織演變的影響[J]. 武漢科技大學學報, 2023, 46 (01): 1-9.

[18]常茜萱, 譚憧, 劉暢, 肖愛達, 王強, 李光強. 板坯連鑄中間包內控流裝置優化的物理和數值模擬[J]. 煉鋼, 2022, 38 (06): 29-37.

[19]趙一將, 李光強, 孟澤, 王肸杰, 趙睿, 劉昱. 不同鋁含量的脫氧劑對鋼液潔凈度的影響[J]. 鋼鐵, 2023, 58 (01): 47-54+90.

[20]陳牒斌, 李光強, 張戰, 黃世輝. 精煉渣和稀土Ce對Fe-30Mn-10Al-1.1C鋼中非金屬夾雜物的影響[J]. 武漢科技大學學報, 2022, 45 (06): 409-417.

[21]高運明, 何林, 秦慶偉, 李光強. 利用ZrO₂固體電解質研究Na₃AlF_6-SiO₂熔鹽中的電沉積[J]. 金屬學報, 2022, 58 (10): 1292-1304.

[22]饒江平, 楊治爭, 李光強, 劉昱, 袁綱, 肖邦志. IF鋼RH精煉理論研究與工藝優化[J]. 煉鋼, 2022, 38 (05): 59-66.

[23]吳志豪, 賀鑄, 譚方關, 肖愛達, 李光強, 王強. 基于神經網絡的LF精煉爐爐襯蝕損預測模型[J]. 鋼鐵研究學報, 2023, 35 (06): 704-711.

[24]田雨豐, 李光強, 肖永力, 劉昱. 殘留CO₂對石灰在轉爐初渣中溶解的影響[J]. 鋼鐵, 2022, 57 (10): 84-90.

[25]肖穎, 劉玉龍, 黃羅翼, 李光強, 鄢文, 朱誠意. 酸溶鋁和鈮含量對取向硅鋼夾雜物特征的影響[J]. 鋼鐵研究學報, 2022, 34 (06): 543-554.

[26]李銳, 張燕玲, 李穎, 黃幫福, 李露, 李光強. pH值和Fe~(3+)濃度對硫酸銨溶解度的影響[J]. 凈水技術, 2022, 41 (05): 91-96.

[27]陳磊, 王德永, 王慧華, 屈天鵬, 黃奧, 李光強. 中間包微孔MgO耐火材料與鋼液反應行為[J]. 鋼鐵研究學報, 2022, 34 (01): 43-51.

[28]趙崢嶸, 曹玉龍, 萬響亮, 李光強. W3Mo4Cr5V6高速鋼中碳化物的高溫轉變行為[J]. 武漢科技大學學報, 2022, 45 (01): 1-8.

[29]梁震江, 鄭萬, 王君馳, 王強, 李光強. 過濾控流中間包流場及夾雜物去除的數值模擬[J]. 連鑄, 2021, (05): 88-98.

[30]何林, 高運明, 秦慶偉, 李光強. Na₃AlF_6-SiO₂熔鹽中Si(Ⅳ)的電化學行為[J]. 武漢科技大學學報, 2021, 44 (06): 423-428.

[31]史先菊, 王強, 李光強, 劉代飛, 李軍. 熔劑顆粒在燒結過程中的特征演變及影響[J]. 鋼鐵, 2021, 56 (12): 28-35.

[32]解曉輝, 劉玉龍, 李光強, 陳新元, 朱誠意. Ce-La合金化處理對取向硅鋼夾雜物特征的影響[J]. 鋼鐵, 2021, 56 (11): 122-134.

[33]王強, 王芳, 賀鑄, 李光強, 李寶寬. 電渣重熔精煉過程數值模擬研究進展[J]. 鋼鐵研究學報, 2021, 33 (08): 681-694.

[34]汪勇, 李光強, 劉玉龍, 高洋, 郭小龍, 朱誠意. Nb微合金化對取向硅鋼常化板中析出物特征及組織和織構的影響[J]. 材料導報, 2022, 36 (07): 207-212.

[35]朱誠意, 鮑遠凱, 汪勇, 馬江華, 李光強. 新能源汽車驅動電機用無取向硅鋼應用現狀和性能調控研究進展[J]. 材料導報, 2021, 35 (23): 23089-23096.

[36]鄭萬, 寇錦榮, 陳小龍, 陳利, 周從銳, 鄧琛, 李光強. 高速連鑄結晶器卷渣缺陷的特征、演變及控制[J]. 煉鋼, 2021, 37 (04): 30-37+84.

[37]楊恒, 吳開明, 王宇航, 胡鋒, 侯廷平, 李光強. 高強度海工鋼中腐蝕活性夾雜物與耐海水腐蝕性能研究[J]. 鋼鐵研究學報, 2021, 33 (07): 610-618.

[38]汪勇, 黃羅翼, 李光強, 朱誠意. Nb含量對取向硅鋼第二相粒子和性能的影響[J]. 武漢科技大學學報, 2021, 44 (05): 321-329.

[39]牛辰睿, 李光強, 曹玉龍, 李嘉維. 高速鋼/42CrMo復合鑄錠界面結構與性能研究[J]. 武漢科技大學學報, 2021, 44 (04): 241-247.

[40]王國偉, 鄭萬, 陳小龍, 周從銳, 熊良友, 李光強. 連鑄連軋卷板邊部線狀缺陷的形成機制[J]. 鋼鐵研究學報, 2021, 33 (01): 64-74.

[41]高運明, 黃振彪, 何林, 李光強. CaCl₂的水解反應對固態SiO₂顯微特征的影響[J]. 重慶大學學報, 2021, 44 (10): 55-65.

[42]曹玉龍, 姜周華, 董艷伍, 李光強, 趙崢嶸. 電渣復合法制備雙金屬復合軋輥的研究進展[J]. 特殊鋼, 2020, 41 (05): 6-13.

[43]閆學強, 鄭萬, 王國偉, 鄢文, 李光強. 微孔MgO耐火材料對鋼液潔凈度的影響[J]. 鋼鐵研究學報, 2020, 32 (06): 483-490.

[44]馮波, 李光強, 胡曉明, 劉培海, 李如松, 張陽琳, 李亞偉, 賀鑄, 樊希安. Improvement of Thermoelectric Performance in BiCuSeO Oxide by Ho Doping and Band Modulation[J]. Chinese Physics Letters, 2020, 37 (03): 66-70.

[45]朱誠意, 黃羅翼, 羅小燕, 劉玉龍, 汪勇, 李光強. 鈣處理對成品無取向硅鋼夾雜物特性的影響[J]. 鋼鐵研究學報, 2020, 32 (02): 117-128.

[46]汪勇, 李光強, 朱誠意, 劉玉龍, 劉昱. Nb對取向硅鋼再加熱過程組織演變和第二相粒子析出的影響[J]. 鋼鐵釩鈦, 2019, 40 (06): 135-142.

[47]黃振彪, 高運明, 秦慶偉, 李光強. 利用固體電解質在CaCl₂熔鹽中電解固態SiO₂制備Si[J]. 武漢科技大學學報, 2019, 42 (06): 425-430.

[48]沈毓, 萬響亮, 劉昱, 李光強, 吳開明. Zr對高強度鋼熱影響區第二相粒子及韌性影響[J]. 焊接學報, 2019, 40 (08): 55-62+163.

[49]王金明, 萬響亮, 王紅鴻, 李光強. 冷變形對高錳奧氏體鋼組織以及力學性能的影響[J]. 材料熱處理學報, 2019, 40 (09): 100-106.

[50]萬響亮, 沈毓, 李鈺, 成林, 李光強, 吳開明. 氧化物和C、Mn對低合金鋼鐵素體形核的影響[J]. 材料熱處理學報, 2019, 40 (09): 114-120.

[51]黃奧, 王雅杰, 鄒永順, 付綠平, 顧華志, 李光強. 耐火材料與鋼液相互作用的研究進展[J]. 中國材料進展, 2019, 38 (08): 775-781+767.

[52]劉健健, 朱誠意, 李光強. 連鑄結晶器銅板表面涂鍍層應用研究進展[J]. 材料導報, 2019, 33 (17): 2831-2838.

[53]蘇逸斯, 馮波, 胡曉明, 劉培海, 李光強, 樊希安. Ba-Pb雙摻雜與晶粒細化的協同調整對BiCuSeO半導體陶瓷熱電性能的影響[J]. 粉末冶金材料科學與工程, 2019, 24 (03): 239-247.

[54]勞一桂, 高運明, 王強, 李光強. 冶金離子熔體電導率測定技術進展[J]. 材料導報, 2019, 33 (11): 1882-1888.

[55]鄭萬, 李天佑, 王春鋒, 熊珊, 李光強, 劉炳宇. CaAl包芯線的熔化特征及喂線參數的優化[J]. 工程科學學報, 2018, 40 (S1): 168-173.

[56]勞一桂, 高運明, 王強, 李光強. CVCC法測定80%CaF₂-10%CaO-10%SiO₂熔體的電導率[J]. 鋼鐵研究學報, 2018, 30 (10): 789-795.

[57]阮墨, 李天佑, 曾成, 王春鋒, 鄭萬, 李光強. LF喂純Ca與CaAl包芯線對DC01鋼的冶金效果的影響[J]. 特殊鋼, 2018, 39 (05): 48-53.

[58]王強, 孫美佳, 李寶寬, 李光強, 彭建平. 開槽陽極對鋁電解槽中氣泡運動影響的數值模擬（英文）[J]. Transactions of Nonferrous Metals Society of China, 2018, 28 (08): 1670-1678.

[59]朱誠意, 羅小燕, 李光強, 馮嘉鑫, 嚴哲鋒. 無取向硅鋼中含鎂夾雜物的形成機理分析[J]. 重慶大學學報, 2018, 41 (08): 34-43.

[60]胡宏波, 高運明, 秦慶偉, 李光強. CaCl₂-NaCl熔鹽中Fe~(3+)電化學行為的循環伏安分析[J]. 武漢科技大學學報, 2018, 41 (04): 262-267.

[61]劉昱, 汪勇, 李光強, 王強, 李寶寬, 張釗. 電流強度對電渣重熔304不銹鋼中夾雜物特征的影響[J]. 武漢科技大學學報, 2018, 41 (03): 168-173.

[62]鄭萬, 李天佑, 王春鋒, 熊珊, 李光強, 朱誠意. 鈣處理工藝的發展與展望[J]. 煉鋼, 2018, 34 (02): 1-7.

[63]劉健健, 朱誠意, 李光強, 陳鵬舉. 石墨烯添加量對Ni基-石墨烯復合鍍層性能的影響[J]. 材料保護, 2018, 51 (03): 77-82.

[64]汪瑞婷, 李光強, 王強, 劉昱, 李寶寬. 電渣重熔過程夾雜物運動行為的數值模擬[J]. 鋼鐵研究學報, 2018, 30 (02): 104-112.

[65]羅小燕, 朱誠意, 李光強, 嚴哲鋒, 馮嘉鑫. 熱裝溫度對無取向硅鋼中夾雜物析出特性的影響[J]. 武漢科技大學學報, 2018, 41 (01): 8-14.

[66]瞿勇, 鄭萬, 付學好, 李光強, 吳振華. 鈣處理鈦合金化鋼中TiN析出行為[J]. 鋼鐵研究學報, 2017, 29 (12): 973-981.

[67]張釗, 劉昱, 李光強, 王強, 袁成, 王力. 70CaF₂-30Al₂O₃渣系電渣重熔Cr13Mn4Mo不銹鋼中夾雜物的演變[J]. 特殊鋼, 2017, 38 (06): 6-10.

[68]趙棟, 李光強, 王恒輝, 馬江華, 沈毓, 秦慶偉. 高磷鮞狀赤鐵礦酸浸脫磷動力學[J]. 鋼鐵研究學報, 2017, 29 (11): 883-891.

[69]馮波, 李光強, 張城誠, 李亞偉, 賀鑄, 樊希安. 溫差發電用BiCuSeO基熱電材料的研究進展[J]. 材料導報, 2017, 31 (21): 24-31+45.

[70]周博文, 李光強, 朱誠意, 侯若谷. 取向硅鋼常化過程析出物和組織演變規律[J]. 重慶大學學報, 2017, 40 (10): 70-78.

[71]鄭萬, 熊珊, 李天佑, 阮墨, 李光強, 薛正良. 夾雜物對低合金鋼點蝕誘發敏感性的影響[J]. 煉鋼, 2017, 33 (05): 31-38+78.

[72]王力, 李光強, 劉昱, 張釗, 李亞偉, 徐小峰. 不同碳含量的MgO-C耐火材料與超低碳鋼液的相互作用[J]. 鋼鐵研究學報, 2017, 29 (08): 616-625.

[73]曹羽鑫, 王恒輝, 馬江華, 趙棟, 李光強. 添加劑對鐵精礦制備還原鐵粉的影響[J]. 過程工程學報, 2018, 18 (01): 133-139.

[74]鄭萬, 瞿勇, 付學好, 李光強, 吳振華. 含鈦高強鋼中夾雜物析出行為研究[J]. 武漢科技大學學報, 2017, 40 (03): 161-166.

[75]鄭萬, 賀志鵬, 李光強, 屠浩, 張戰. RH噴吹參數對循環流量和均混時間影響的物理模擬[J]. 鋼鐵研究學報, 2017, 29 (05): 373-381.

[76]鄭萬, 付學好, 瞿勇, 熊珊, 李光強, 秦慶偉. Al-Mg/Ti-Mg脫氧鋼中夾雜物誘發點蝕行為研究[J]. 武漢科技大學學報, 2017, 40 (02): 81-87.

[77]任能, 王強, 李寶寬, 李光強. 三相電極電渣重熔系統中的磁流體流動和傳熱分析[J]. 大型鑄鍛件, 2017, (02): 13-16+24.

[78]尹月, 馬北越, 張博文, 李世明, 于景坤, 張戰, 李光強. 添加La₂O₃對粉煤灰合成Al₂O₃-SiC復合粉體的影響[J]. 材料導報, 2017, 31 (04): 111-114+120.

[79]薛平, 李光強, 秦慶偉, 魏明星. 從廢舊金剛石刀頭中酸浸分離有價金屬熱力學分析及試驗研究[J]. 濕法冶金, 2017, 36 (01): 19-23.

[80]朱誠意, 陳先紅, 陳偉濤, 徐光, 李光強. 酸溶鋁和硫含量對鑄態取向硅鋼高溫組織演變的影響[J]. 熱加工工藝, 2017, 46 (03): 29-33.

[81]肖愛達, 李光強, 李昭東, 張波. 高Ti微合金化低碳鋼230mm連鑄板坯斷裂分析和工藝改善[J]. 特殊鋼, 2017, 38 (01): 31-35.

[82]王強, 任能, 李寶寬, 李光強. 電渣重熔磁流體傳熱傳質過程的數值模擬[J]. 大型鑄鍛件, 2017, (01): 1-3+6.

[83]王恒輝, 李光強, 馬江華, 胡鈺鑫, 趙棟. 高磷赤鐵礦制備碳化鐵的產物分離試驗研究[J]. 武漢科技大學學報, 2017, 40 (01): 11-16+22.

[84]劉昱, 盧汝, 李光強, 王力, 張釗, 楊治爭, 饒江平. 堿性中間包覆蓋劑對鋼水潔凈度的影響[J]. 武漢科技大學學報, 2017, 40 (01): 5-10.

[85]張力, 張武, 李光強. 動態氧化條件下含鈦高爐熔渣中金屬鐵的聚集、長大與沉降行為[J]. 工程科學學報, 2016, 38 (12): 1695-1701.

[86]肖愛達, 李光強, 謝世正, 鄧之勛. 基于自適應模型的精煉爐合金加料智能控制系統[J]. 冶金自動化, 2017, 41 (01): 52-57.

[87]肖愛達, 李光強, 謝世正, 鄧之勛. 不同As含量的Ti微合金化IF鋼熱軋板酸洗行為研究[J]. 武漢科技大學學報, 2016, 39 (06): 406-411.

[88]張力, 張武, 李光強. 動態氧化條件下含鈦高爐熔渣中鈣鈦礦析出與長大機理[J]. 工程科學學報, 2016, 38 (11): 1553-1558.

[89]薛平, 李光強, 魏明星. 回轉式連續逆流浸出機組的開發與應用[J]. 現代化工, 2016, 36 (09): 154-156+158.

[90]鄭萬, 齊盼盼, 沈星, 姜玉龍, 李光強, 朱誠意. 低碳低硫鋼中MnS析出行為分析[J]. 武漢科技大學學報, 2016, 39 (04): 241-247.

[91]萬響亮, 李光強, 周博文, 馬江華. 奧氏體不銹鋼晶粒細化對形變機制和力學性能的影響[J]. 材料工程, 2016, 44 (08): 29-33.

[92]朱誠意, 李光強, 鄭萬. 提高冶金實驗研究方法教學效果的實踐[J]. 中國冶金教育, 2016, (03): 5-8+11.

[93]萬響亮, 李光強, 吳開明. 低合金高強鋼針狀鐵素體組織特征和形成機理[J]. 鋼鐵研究學報, 2016, 28 (06): 1-12.

[94]姜玉龍, 鄭萬, 齊盼盼, 李天佑, 王春鋒, 劉炳宇, 李光強. 150t LF精煉喂鈣線處理鋼中夾雜物的演變[J]. 特殊鋼, 2016, 37 (03): 8-12.

[95]陳鵬舉, 朱誠意, 張志成, 李光強, 潘明旭. GCr15軸承鋼LF精煉過程脫硫能力的熱力學評價[J]. 鋼鐵研究學報, 2016, 28 (05): 30-35.

[96]劉昱, 李光強, 楊治爭, 饒江平. 中間包涂料對鋼液潔凈度的影響[J]. 過程工程學報, 2016, 16 (02): 303-309.

[97]萬響亮, 李光強, 吳開明. 原位觀察TiN粒子對低合金高強度鋼模擬焊接熱影響區粗晶區晶粒細化作用[J]. 工程科學學報, 2016, 38 (03): 371-378.

[98]周博文, 李光強, 朱誠意, 付勇. 錫對取向硅鋼中抑制劑析出行為及顯微組織的影響[J]. 熱加工工藝, 2016, 45 (04): 19-23.

[99]楊雪萍, 李光強, 饒江平, 楊治爭. 板坯連鑄結晶器吹氬工藝參數優化[J]. 武漢科技大學學報, 2016, 39 (01): 12-18.

[100]萬響亮, 李光強, 周博文, 馬江華, 徐光. 微米/納米復合結構奧氏體不銹鋼形變機理及應變硬化行為[J]. 材料熱處理學報, 2015, 36 (11): 72-78.

[101]李光強, 楊劍, 王恒輝, 馬江華. 礦粉粒度及反應溫度對高磷鮞狀赤鐵礦制備碳化鐵的影響[J]. 重慶大學學報, 2015, 38 (05): 1-10.

[102]朱誠意, 吳炳新, 張志成, 李光強, 潘明旭. 高品質GCr15軸承鋼二次精煉過程中夾雜物的演變規律[J]. 重慶大學學報, 2015, 38 (05): 89-97.

[103]鄭萬, 劉磊, 李光強, 吳振華, 朱誠意. Ti--Mg復合脫氧鋼中夾雜物細化機制[J]. 工程科學學報, 2015, 37 (07): 873-882.

[104]潘麗萍, 賀鑄, 李寶寬, 李光強. 6.5%Si鋼雙輥薄帶連鑄布流水口結構優化的三維數值模擬[J]. 特殊鋼, 2015, 36 (04): 13-17.

[105]王珺, 李光強, 楊雪萍, 賀鑄, 李寶寬. 電渣重熔過程中渣成分變化及鋼中氧含量預測[J]. 鋼鐵研究學報, 2015, 27 (06): 18-23.

[106]萬響亮, 吳開明, 王恒輝, 李光強. 氧化物冶金技術在大線能量焊接用鋼的應用[J]. 中國冶金, 2015, 25 (06): 6-12.

[107]朱誠意, 陳先紅, 李光強, 付勇, 姜玉龍. 低溫取向硅鋼中第二相粒子的析出行為及熱軋組織[J]. 重慶大學學報, 2015, 38 (02): 111-117.

[108]李光強, 付勇, 陳先紅, 張戰, 饒江平, 楊治爭. 兩流中間包流場的物理模擬與結構優化[J]. 重慶大學學報, 2015, 38 (02): 64-71.

[109]鄭萬, 吳振華, 李光強, 朱誠意. Ti-Mg復合脫氧和硫含量對鋼中夾雜物特征及MnS析出行為的影響[J]. 工程科學學報, 2015, 37 (03): 292-300.

[110]朱誠意, 陳先紅, 李光強, 付勇, 徐光. 高品質取向硅鋼成分控制的新進展及其對鋼磁性能的影響[J]. 材料導報, 2015, 29 (01): 6-14.

[111]王恒輝, 萬響亮, 李光強, 王紅鴻, 吳開明. 低合金高強度鋼焊縫針狀鐵素體聯鎖組織與性能[J]. 材料熱處理學報, 2014, 35 (12): 114-120.

[112]楊宏偉, 李光強, 周耀, 朱誠意. 鋼包渣改質對錳在渣-鋼間分配的影響[J]. 鋼鐵研究學報, 2014, 26 (12): 27-31+41.

[113]湯海波, 秦慶偉, 郭勇, 鄭鑫, 薛平, 李光強, 馬登峰. 高砷煙塵酸性氧化浸出砷和鋅的試驗研究[J]. 武漢科技大學學報, 2014, 37 (05): 341-344.

[114]陳先紅, 朱誠意, 付勇, 李光強. 抑制劑成分對取向硅鋼夾雜物析出及磁性能的影響[J]. 電工材料, 2014, (05): 24-28.

[115]周博文, 李光強, 朱誠意, 鄭建新, 付勇, 張峰. 抑制劑形成元素對取向硅鋼中夾雜物析出行為及熱軋組織的影響[J]. 鋼鐵釩鈦, 2014, 35 (05): 110-116.

[116]楊宏偉, 蘇麗娟, 李光強, 陳兆平, 皮朝輝, 周耀. 精煉渣對SUS444鐵素體不銹鋼中夾雜物的影響[J]. 煉鋼, 2014, 30 (04): 42-46+51.

[117]朱誠意, 吳炳新, 張志成, 李光強, 潘明旭. 軸承鋼生產過程中夾雜物控制的研究進展[J]. 機械工程材料, 2014, 38 (07): 8-15.

[118]湯海波, 秦慶偉, 郭勇, 鄭鑫, 薛平, 李光強. 高砷銻煙塵焙燒脫砷試驗研究[J]. 礦產保護與利用, 2014, (03): 35-38.

[119]鄭萬, 屠浩, 李光強, 程輝武, 朱誠意, 谷繼剛. 250t鋼包底吹氬卷渣和鋼液裸露的模擬[J]. 過程工程學報, 2014, 14 (03): 361-368.

[120]鄭萬, 屠浩, 李光強, 沈星, 徐云龍, 朱誠意, 盧凱. 250t鋼包底吹氬精煉工藝優化的物理模擬[J]. 北京科技大學學報, 2014, 36 (S1): 53-59.

[121]鄭萬, 溫正勇, 李光強, 吳勝利, 姚增遠. 顆粒粒度和形貌特征對保護渣強度的影響[J]. 武漢科技大學學報, 2014, 37 (02): 97-101.

[122]朱誠意, 鄭建新, 李光強, 陳先紅, 張峰. 酸溶鋁對鑄態取向硅鋼中第二相粒子組成和形貌的影響[J]. 特殊鋼, 2014, 35 (02): 60-64.

[123]鄭萬, 沈星, 李光強, 朱誠意, 吳振華, 屠浩, 盧凱. 酸溶鋁含量對硅鎮靜鋼夾雜物特征及水口堵塞的影響[J]. 特殊鋼, 2014, 35 (01): 36-39.

[124]周耀, 李光強, 楊宏偉, 朱誠意. 超低碳鋁硅鎮靜鋼精煉過程中夾雜物的行為及其對鋼組織的影響[J]. 過程工程學報, 2013, 13 (06): 1025-1033.

[125]李鵬, 李光強, 鄭萬. Al-Ti脫氧對非調質鋼中MnS析出行為及組織的影響[J]. 鋼鐵研究學報, 2013, 25 (11): 49-56.

[126]鄭萬, 沈星, 楊運超, 李光強, 盧凱, 屠浩, 朱誠意. 250t鋼包吹氬夾雜物去除的水力學模擬[J]. 煉鋼, 2013, 29 (05): 38-42.

[127]樊希安, 吳朝陽, 李光強, 甘章華, 楊帆, 蔡新志. 高Si電工鋼鐵芯的MA-SPS制備工藝和磁性能研究[J]. 粉末冶金技術, 2013, 31 (04): 267-272.

[128]吳朝陽, 樊希安, 李光強, 甘章華, 陸磊, 蔡新志. 含核殼異質結構6.5% Si高硅鋼鐵芯的制備與磁性能[J]. 功能材料, 2013, 44 (10): 1431-1436.

[129]蘇麗娟, 李光強, 李偉, 袁綱, 李鵬, 陳兆平. VOD精煉渣對Al₂O₃的溶解[J]. 過程工程學報, 2013, 13 (02): 230-235.

[130]張峰, 李光強, 朱誠意. 稀土處理無取向硅鋼中的夾雜物與電磁性能變化[J]. 功能材料, 2013, 44 (07): 1029-1033.

[131]劉赫莉, 李光強, 李永軍, 朱誠意, 張帆, 郭木星, 陳兆平. 超純鐵素體不銹鋼中含Ti和Nb夾雜物的非水電解分離及其在鋼中的析出行為分析[J]. 過程工程學報, 2013, 13 (01): 33-40.

[132]袁綱, 李光強, 李永軍, 陳兆平. 鈦穩定超純鐵素體不銹鋼硅鋁復合脫氧的試驗研究[J]. 鋼鐵研究學報, 2013, 25 (02): 33-38.

[133]樊希安, 洪小杰, 吳朝陽, 朱誠意, 李光強, 侯延輝. 一維Bi₂Te₃基納米材料的制備、結構控制與熱電性能[J]. 功能材料, 2013, 44 (03): 305-312+316.

[134]張武, 張力, 張菊花, 呂良東, 馮乃祥, 李光強. 人造金紅石制備過程的浸出動力學[J]. 材料與冶金學報, 2012, 11 (04): 248-251.

[135]李偉, 李光強, 蘇麗娟, 陳兆平. VOD精煉渣的熔化過程分析及成分優化[J]. 武漢科技大學學報, 2012, 35 (06): 415-421.

[136]鄭達, 張剛, 李光強, 楊建紅, 秦慶偉. CuO摻雜對10NiO-NiFe₂O_4陶瓷致密化燒結及其力學性能的影響[J]. 武漢科技大學學報, 2012, 35 (05): 371-376.

[137]張帆, 李光強, 李永軍, 劉赫莉, 陳兆平. 超純鐵素體不銹鋼中TiN夾雜析出的熱力學分析[J]. 武漢科技大學學報, 2012, 35 (05): 347-351.

[138]李永軍, 李光強, 朱誠意, 樊希安. 高磷鐵礦碳熱還原同步脫磷的實驗研究[J]. 武漢科技大學學報, 2012, 35 (04): 254-259.

[139]呂學鈞, 張峰, 王波, 朱誠意, 李光強. 夾雜物對無取向硅鋼磁性能的影響[J]. 特殊鋼, 2012, 33 (04): 22-25.

[140]張峰, 李光強, 繆樂德, 朱誠意. 化學成分體系對無取向硅鋼夾雜物控制的影響[J]. 鋼鐵研究學報, 2012, 24 (07): 40-44.

[141]張峰, 朱誠意, 繆樂德, 李光強. 國內外高牌號無取向硅鋼夾雜物的控制效果與評價[J]. 冶金分析, 2012, 32 (07): 12-20.

[142]朱誠意, 李光強, 陳兆平, 張峰. 渣中MnO含量和脫氧劑種類對取向硅鋼回錳、回磷的影響[J]. 電工材料, 2012, (02): 37-41.

[143]朱萬軍, 區鐵, 李光強, 王春鋒, 沈繼勝. 低碳低硅鋁鎮靜鋼精煉過程硅含量控制分析[J]. 煉鋼, 2012, 28 (02): 48-51+64.

[144]楊治爭, 李光強, 饒江平, 王延峰, 彭著剛, 洪霞. 熱軋卷表面夾雜缺陷的分析與控制[J]. 武漢科技大學學報, 2012, 35 (01): 1-4+8.

[145]朱誠意, 李光強, 陳兆平, 夏幸明, 洪小杰. 魚雷罐中鐵水預處理噴粉脫錳的動力學模型[J]. 過程工程學報, 2011, 11 (06): 943-950.

[146]朱萬軍, 區鐵, 李光強, 沈繼勝, 王春鋒. LF精煉對CSP集裝箱鋼T[O]和夾雜物影響[J]. 北京科技大學學報, 2011, 33 (S1): 137-141.

[147]宋宇, 李光強, 楊飛. Al-Ti-Mg復合脫氧對鋼中夾雜物及組織的影響[J]. 北京科技大學學報, 2011, 33 (10): 1214-1219.

[148]張力, 李光強, 張武. 低品位高鈦渣中鈦組分制備金紅石(英文)[J]. Transactions of Nonferrous Metals Society of China, 2011, 21 (10): 2317-2322.

[149]張峰, 李光強, 馬長松, 陳曉. 非穩態澆鑄無取向電工鋼板坯對成品鐵損的影響[J]. 鋼鐵釩鈦, 2011, 32 (04): 51-57.

[150]張峰, 呂學鈞, 王波, 馬志剛, 張毅, 李光強. 稀土處理無取向硅鋼中夾雜物的控制[J]. 鋼鐵釩鈦, 2011, 32 (03): 46-50.

[151]宋春暉, 黃峰, 劉靜, 李光強, 秦慶偉. pH值對X120鋼在模擬鷹潭酸性土壤溶液中電化學行為的影響[J]. 腐蝕與防護, 2011, 32 (05): 335-339.

[152]侯延輝, 李光強, 劉志義, 樊希安. 從電子結構和成鍵特性分析高Cu/Mg比Al-Cu-Mg-Ag合金強化機制[J]. 稀有金屬材料與工程, 2011, 40 (03): 407-412.

[153]韓長菊, 李光強. 做大做強營口產業集群的創新路徑[J]. 科技創新導報, 2011, (08): 221.

[154]廖廣府, 陳敏, 李光強, 張浩, 肖尊湖, 蘇風光. 210t頂底復吹轉爐濺渣護爐模擬研究[J]. 過程工程學報, 2011, 11 (01): 31-35.

[155]陳敏, 廖廣府, 李光強, 袁綱, 肖尊湖, 蘇風光. 210t頂底復吹轉爐水模型實驗研究[J]. 過程工程學報, 2011, 11 (01): 36-39.

[156]楊飛, 李光強, 宋宇. Mn-Si-Ti-Mg復合脫氧對鋼中氧化物夾雜的影響[J]. 鋼鐵釩鈦, 2011, 32 (01): 71-77.

[157]王建鋒, 鄧深, 饒江平, 李光強, 張峰. 鈮鈦及鈮釩鈦微合金鋼的高溫力學性能研究[J]. 煉鋼, 2011, 27 (01): 46-49.

[158]張峰, 王波, 陳曉, 馬志剛, 張毅, 李光強. 鈣處理對無取向硅鋼中非金屬夾雜物的影響[J]. 特殊鋼, 2011, 32 (01): 44-47.

[159]傅杰, 李光強, 于月光, 毛新平, 方克明. 基于納米鐵碳析出物的鋼綜合強化機理[J]. 中國工程科學, 2011, 13 (01): 31-42.

[160]張峰, 李光強. 超低碳鋁硅鎮靜鋼中極低Ti的控制[J]. 電工材料, 2010, (04): 28-31.

[161]王建鋒, 李光強, 溫德智, 肖愛達, 鄧深. 600MPa級鈦微合金化高強鋼的組織與性能研究[J]. 武漢科技大學學報, 2010, 33 (06): 561-565.

[162]朱誠意, 謝軍, 柯昌明, 李光強, 宋宇. 鈦微合金化高強度耐候鋼成分設計及熔煉[J]. 武漢科技大學學報, 2010, 33 (05): 516-521.

[163]王建鋒, 李光強, 肖愛達, 鄧深. 600MPa級鈦微合金化高強鋼焊接接頭組織和性能研究[J]. 熱加工工藝, 2010, 39 (19): 11-14.

[164]李光強, 董訓祥, 張帆, 朱誠意. 316L不銹鋼的高壓增氮與脫氧研究[J]. 武漢科技大學學報, 2010, 33 (04): 347-351.

[165]張峰, 李光強, 陳曉, 龐春敏. 煉鋼工藝和成分體系對B50A1300硅鋼鐵損的影響[J]. 武漢科技大學學報, 2010, 33 (03): 225-228.

[166]張峰, 李光強. Cr對無取向硅鋼磁性能的影響[J]. 特殊鋼, 2010, 31 (03): 57-58.

[167]馬駿, 沈巧珍, 陽方, 李光強. 底吹氬鋼包內三維流場的數值模擬[J]. 武漢科技大學學報, 2010, 33 (02): 124-128.

[168]王建鋒, 鄧深, 饒江平, 李光強, 張峰. 鈦微合金化Q345E鋼的試驗研究[J]. 鋼鐵釩鈦, 2010, 31 (02): 20-25.

[169]吳開兵, 徐光, 鄒航, 李光強, 肖愛達. 鈦微合金化X70管線鋼動態再結晶研究[J]. 寬厚板, 2010, 16 (01): 1-8.

[170]王曉明, 李光強, 張艷芳, 肖溦, 呂潔. H₂-CO-CO₂氣氛中添加V₂O₃二步法制備碳化鐵的動力學分析[J]. 武漢科技大學學報, 2010, 33 (01): 32-37.

[171]余健, 李晶, 李光強, 傅杰, 肖愛達, 王建峰, 齊達. 含0.065%Ti的高強度低合金鋼中夾雜物[J]. 北京科技大學學報, 2009, 31 (S1): 154-158.

[172]陳婷, 徐光, 李光強, 肖愛達, 羅豐. 鈦微合金化X70管線鋼動態CCT曲線研究[J]. 鋼鐵研究, 2009, 37 (06): 30-33.

[173]鄒航, 徐光, 李光強, 王建峰, 甘曉龍. 鈦微合金化X70管線鋼熱變形方程的建立[J]. 鋼鐵研究, 2009, 37 (05): 26-30.

[174]李光強, 張麗琴, 秦慶偉, 董訓祥, 朱誠意. 氮含量和環境溫度對316L不銹鋼耐腐蝕性的影響[J]. 武漢科技大學學報, 2009, 32 (03): 225-228.

[175]馬國軍, 劉洋, 蘇偉厚, 李光強, 朱誠意. 采用磁選和重選回收廢舊電路板中的金屬[J]. 武漢科技大學學報, 2009, 32 (03): 296-299.

[176]熊瑋, 李光強, 陳兆平, 蔣曉放, 楊治爭. 頂底復吹轉爐內錳礦直接合金化的動力學模型[J]. 過程工程學報, 2009, 9 (S1): 369-373.

[177]秦慶偉, 張麗琴, 黃自力, 李密, 李光強, 廖廣東. 反射爐煉銅渣回收銅技術探索[J]. 過程工程學報, 2009, 9 (S1): 13-18.

[178]張晟, 李光強, 楊治爭, 王俊杰, 饒江平. 結晶器內鋼液流速對IF鋼寬板坯表層夾雜物分布的影響[J]. 武漢科技大學學報, 2009, 32 (01): 23-27.

[179]肖愛達, 李光強, 溫德智. 殘余元素對漣鋼CSP熱冷軋卷質量的影響[J]. 世界鋼鐵, 2009, 9 (01): 40-42+64.

[180]楊治爭, 李光強, 劉占增, 張晟, 周有預. SS400熱軋板結疤缺陷的成因分析[J]. 武漢科技大學學報, 2008, 31 (06): 609-612+617.

[181]朱誠意, 李光強, 陳兆平, 董訓祥. 錳在渣/鋼之間分配平衡的熱力學評估[J]. 武漢科技大學學報, 2008, 31 (06): 595-600.

[182]程常桂, 李光強, 帥靜, 陳兆平, 夏幸明. “三脫”預處理鐵水溫降機理模型的研究[J]. 鋼鐵, 2008, 43 (12): 42-45.

[183]馬國軍, 王戰仁, 李光強, 朱誠意, 向喜. 諾蘭達銅渣中有價元素的回收[J]. 武漢科技大學學報, 2008, (05): 473-477.

[184]李光強, 郭木星, 張峰, 朱誠意, Bart B, Patrick W. 高氮鋼相變及重熔過程的在線觀察[J]. 武漢科技大學學報, 2008, (05): 457-463.

[185]何強, 李光強, 馬江華, 倪紅衛. 添加V₂O_5催化制備碳化鐵的動力學[J]. 過程工程學報, 2008, (S1): 193-197.

[186]賀道中, 李光強. 含鋁冷鐓鋼連鑄塞棒結瘤分析和預防工藝措施[J]. 特殊鋼, 2008, (03): 47-49.

[187]何強, 李光強, 吳仕慈, 馬江華. V₂O₃、Al₂O₃添加劑對碳化鐵生成的影響[J]. 鋼鐵釩鈦, 2008, (02): 27-31.

[188]朱誠意, 李光強, 陳兆平, 夏幸明, 劉君, 董訓祥. 與CaO-Fe_tO-SiO₂-MnO-P₂O_5渣平衡的碳飽和鐵中錳含量的預測[J]. 武漢科技大學學報(自然科學版), 2008, (02): 122-126.

[189]董廷亮, 李光強. 氮在Fe-Cr-V液態高氮合金中的溶解行為[J]. 鋼鐵研究學報, 2008, (04): 18-21.

[190]高運明, 薛正良, 李光強. 校廠結合指導本科生畢業論文的教學模式[J]. 中國冶金教育, 2008, (02): 40-42.

[191]董廷亮, 李光強. 加壓感應熔煉Fe-Cr-V系高氮鋼及其鋁脫氧[J]. 鋼鐵研究學報, 2008, (03): 9-12.

[192]朱誠意, 李光強, 秦慶偉, 馬國軍. Thermodynamic principle and properties of electroplated RE-Ni-W-P-B_4C composite coatings[J]. Transactions of Nonferrous Metals Society of China, 2007, (S1): 878-885.

[193]馬江華, 李光強. 鐵礦石孔隙度對其還原和碳化鐵生成的影響[J]. 過程工程學報, 2007, (06): 1132-1137.

[194]劉君, 李光強, 朱誠意, 王昌安. 高磷鐵礦處理及高磷鐵水脫磷研究進展[J]. 材料與冶金學報, 2007, (03): 173-179.

[195]張鑫, 劉靜, 李光強, 彭冰. 超細晶高氮奧氏體不銹鋼的制備及其性能[J]. 機械工程材料, 2007, (08): 29-31+34.

[196]饒江平, 李光強, 王俊杰, 張細菊, 朱誠意. 連鑄結晶器表面電鍍Ni-W-P-B_4C復合鍍層的性能研究[J]. 武漢科技大學學報(自然科學版), 2007, (04): 364-367.

[197]彭冰, 劉靜, 李光強, 張鑫. 氮對超細晶奧氏體不銹鋼組織和性能的影響[J]. 鋼鐵釩鈦, 2007, (03): 5-10.

[198]李光強, 董廷亮. 高氮鋼的基礎研究及應用進展[J]. 中國冶金, 2007, (07): 5-11.

[199]董廷亮, 李光強. 高氮鋼的制造工藝[J]. 冶金信息導刊, 2007, (02): 14-17.

[200]張鑫, 劉靜, 李光強. 機械合金化制備超細晶高氮奧氏體不銹鋼粉末的探討[J]. 粉末冶金工業, 2006, (05): 11-15.

[201]王建麗, 李光強, 朱誠意. 檸檬酸含量對電鍍RE-Ni-W-P-SiC復合鍍層性能的影響[J]. 腐蝕與防護, 2006, (08): 408-411.

[202]張鑫, 劉靜, 李光強. 放電等離子燒結制備超細晶奧氏體不銹鋼的研究[J]. 鋼鐵釩鈦, 2006, (02): 17-20+47.

[203]張鑫, 劉靜, 李光強. XRD與TEM技術在分析納米金屬晶粒尺寸中的應用[J]. 南方金屬, 2006, (03): 15-17+27.

[204]隋智通, 郭振中, 張力, 張林楠, 王明玉, 婁太平, 李光強. 含鈦高爐渣中鈦組分的綠色分離技術[J]. 材料與冶金學報, 2006, (02): 93-97.

[205]何航, 倪紅衛, 李光強, 劉靜, 趙惠忠. 高能球磨制備430L不銹鋼納米晶粉末[J]. 過程工程學報, 2006, 6 (S1): 23-25.

[206]朱誠意, 李光強, 秦慶偉. 煉鋼電弧爐爐塵處理工藝進展[J]. 過程工程學報, 2006, 6 (S1): 133-138.

[207]朱誠意, 李光強, 饒江平, 彭其春. 連鑄薄板坯的質量缺陷及其改善措施研究[J]. 上海金屬, 2006, (02): 15-20.

[208]張峰, 李光強, 朱誠意. 高氮鋼制備及焊接過程中氮的溶解與釋放[J]. 材料與冶金學報, 2006, (01): 14-19.

[209]朱誠意, 李光強, 張峰, 彭其春, 劉君. 金屬/陶瓷復合材料的原位合成及其結構研究[J]. 機械工程材料, 2006, (01): 33-35+39.

[210]王建麗, 李光強, 朱誠意, 彭其春. 表面改性技術在連鑄結晶器上的應用進展[J]. 電鍍與涂飾, 2005, (12): 58-62.

[211]李光強,張鵬科,朱誠意,張力,隋智通. 用碳熱還原法從含釩鋼渣回收含釩生鐵[J]. 四川冶金, 2005, (05): 61-64+53.

[212]張峰,李光強,朱誠意. 高氮Fe-Cr-Mn-Ni系奧氏體不銹鋼的加壓感應熔煉[J]. 特殊鋼, 2005, (05): 10-13.

[213]張軍穎,朱誠意,李光強. 鋼水成分傳感器及其應用進展[J]. 傳感器世界, 2005, (10): 6-11.

[214]彭其春,楊成威,張細菊,張峰,李光強,鄒衛軍,周春泉,周鑒. 漣源鋼鐵公司CSP試生產Q235B鋼質量分析[J]. 武漢科技大學學報(自然科學版), 2005, (03): 215-217+240.

[215]張峰,李光強,朱誠意,彭其春,楊成威. 氮在液態Fe-Cr-Mn(Ni)系不銹鋼中的溶解[J]. 材料與冶金學報, 2005, (03): 8-12.

[216]李光強,張峰,朱誠意. 1473K,0.1MPa氮氣氛中Fe-Cr-Mn系不銹鋼的固態滲氮[J]. 武漢科技大學學報(自然科學版), 2005, (02): 115-118.

[217]朱誠意,李光強,張峰,郭忠誠. 連鑄結晶器表面鍍層技術研究進展[J]. 材料保護, 2005, (05): 43-47+79.

[218]彭其春,楊成威,李光強,朱誠意,張峰,彭覺,趙黎明. 湘鋼高Al₂O₃高爐渣粘度研究[J]. 武漢科技大學學報(自然科學版), 2005, (01): 11-13.

[219]張峰,李光強,彭其春,朱誠意. 轉爐大補爐后第一爐鋼的脫磷探討[J]. 材料與冶金學報, 2005, (01): 4-9.

[220]張鵬科,楊印東,李光強. 用赤泥進行鐵水預處理[J]. 礦業快報, 2005, (03): 26-30.

[221]彭其春,李光強,楊成威,顧克井,朱偉中,姚嘉斌. 加熱爐用鈷合金Co-20耐熱墊塊改進試驗[J]. 武漢科技大學學報(自然科學版), 2003, (04): 331-333.

[222]彭其春,李光強,朱誠意. 稀土元素對Fe-Cr-Al系合金抗氧化性的影響[J]. 稀土, 2003, (05): 13-17.

[223]李光強,張峰,張力,隋智通. 高溫碳熱還原進行轉爐渣資源化的研究[J]. 材料與冶金學報, 2003, (03): 167-172.

[224]李光強,張林楠,彭其春,都興紅,隋智通. 原位還原法制備Al/Al₂O₃復合材料的力學性質及反應動力學[J]. 材料與冶金學報, 2003, (03): 193-199.

[225]朱偉中,顧克井,田勇,曹建平,賈慶賢,彭其春,李光強. 轉爐出鋼擋渣改進實踐[J]. 鋼鐵研究, 2003, (03): 9-11+31.

[226]張力,李光強,隋智通. 由改性高鈦渣浸出制備富鈦料的研究[J]. 礦產綜合利用, 2002, (06): 6-9.

[227]張力,李光強,隋智通. 高鈦渣氧化過程的動力學[J]. 中國有色金屬學報, 2002, (05): 1069-1073.

[228]張力,李光強,婁太平,隋智通. 高鈦渣中鈦組分的選擇性富集與長大[J]. 金屬學報, 2002, (04): 400-402.

[229]王淑蘭,李光強,都興紅,李穎君,隋智通. 交流阻抗譜法研究β'-sialon結合SiC陶瓷材料的性能[J]. 硅酸鹽學報, 2000, (05): 479-482+486.

[230]顧軍,李光強,隋智通. 釩氧化還原液流電池研究進展Ⅱ電池材料的發展[J]. 電源技術, 2000, (03): 181-183.

[231]李遼沙,李光強,婁太平,車蔭昌,隋智通. 電動勢法研究富鈦渣中低價鈦氧化過程動力學[J]. 金屬學報, 2000, (06): 642-646.

[232]顧軍,李光強,許茜,隋智通. 釩氧化還原液流電池的研究進展(Ⅰ)電池原理、進展[J]. 電源技術, 2000, (02): 116-119.

[233]隋升,顧軍,李光強,隋智通. 燃料電池電極用多孔碳板[J]. 東北大學學報, 2000, (02): 207-209.

[234]隋升,顧軍,李光強,隋智通. 磷酸燃料電池(PAFC)進展[J]. 電源技術, 2000, (01): 50-53.

[235]顧軍,隋升,李光強,隋智通. 燃料電池電極制作方法的研究[J]. 電化學, 1999, (04): 459-462.

[236]顧軍,隋升,李光強,隋智通. 堿性燃料電池中氫電極催化劑的研究[J]. 電源技術, 1999, (04): 23-25.

[237]顧軍,隋升,李光強,隋智通. La_1-xCa_xFe_(1-y)Co_yO₃對氧氣還原的催化活性[J]. 無機材料學報, 1999, (04): 618-622.

[238]顧軍,隋升,李光強,隋智通. 燃料電池中氫電極催化劑的研究[J]. 燃料化學學報, 1999, (03): 91-94.

[239]王淑蘭,李光強,隋智通. 含Ti高爐渣冷卻及析晶過程中電導率的變化[J]. 金屬學報, 1999, (05): 499-502.

[240]王淑蘭,李光強,王庚華,隋智通. 融熔Cu-S/CaO-SiO₂-Al₂O₃體系界面脫硫反應動力學的阻抗分析[J]. 中國有色金屬學報, 1999, (01): 154-158.

[241]王淑蘭,李光強,隋智通. 融熔Cu-S,Fe-S/CaO-SiO₂-Al₂O₃體系界面脫硫反應動力學的阻抗譜分析[J]. 金屬學報, 1999, (03): 306-310.

[242]李光強,劉穎,梁連科,隋智通. 鐵液中Si及Al含量的快速測定[J]. 金屬學報, 1999, (02): 203-206.

[243]王淑蘭,李光強,隋智通. 熔融Sn—S/ZnCl₂-NaCl體系界面脫硫反應動力學的阻抗分析[J]. 金屬學報, 1998, (05): 521-525.

[244]李光強，郭振中，吳大山，隋智通. 濕化學法制備CaZr_1－xIn_xO_（3－α）及其燒結體的阻抗譜研究[J]. 硅酸鹽學報, 1996, (04): 430-435.

[245]李光強，徐秀光. 固體電解質氧傳感器的阻抗譜分析[J]. 無機材料學報, 1995, (01): 120-124.

[246]肖理生，李光強，隋智通，王常珍. 固體電解質La_1－xCa_xF_（3－x）的阻抗譜研究[J]. 硅酸鹽學報, 1994, (06): 553-558.

[247]徐秀光，王常珍，李光強，于化龍，李碧霞. La—β—Al₂O₃固體電解質研究[J]. 中國稀土學報, 1994, (02): 120-123.

發表會議論文

[1]張金帥, 李光強, 王紅鴻, 萬響亮 & 胡明峰. (2022). 含鈰超低溫高錳鋼焊縫金屬的夾雜物演變及微觀組織調控. (eds.) 中國稀土學會2022學術年會、第十四屆中國包頭·稀土產業論壇摘要集 (pp.492).

[2]劉暢, 譚憧, 楊光美, 李光強 & 王強. (2022). CaO-Al₂O₃-SiO₂熔渣對多孔MgO-Al₂O₃耐火材料滲透行為的數值模擬研究. (eds.) 第十八屆全國耐火材料青年學術報告會論文集 (pp.260-266).

[3]王強, 盧汝, 劉昱, 李光強 & 楊永祥. (2020). Numerical Investigation of Desulfurization of Rejected Electrolytic Manganese Metal in Electroslag Remelting Process. (eds.) 第五屆全國電磁冶金與強磁場材料科學年會論文集 (pp.145-150).

[4]王強; 譚憧; 李寶寬; 李光強.陶瓷過濾器對中間包內夾雜物運動的影響.河北省金屬學會、江蘇省金屬學會、河北科技大學、華北理工大學.

[5]劉昱, 田雨豐, 李光強, 李存林, 肖永力 & 李永謙. (2020). 轉爐鋼渣爐內改質的研究進展及展望. (eds.) 2020年全國冶金能源環保技術交流會會議文集 (pp.329-337).

[6]劉昱, 李光強, 王肸杰, 黃雪馳, 王強 & 李寶寬. (2020). 真空電渣重熔過程中鋼液凈化的機理研究. (eds.) 第十屆中國金屬學會青年學術年會暨第四屆遼寧青年科學家論壇會議指南 (pp.65).

[7]侯延輝, 劉林利, 李光強, 李騰飛 & 劉昱. (2019). The Correlation between Potential Difference and Galvanic Corrosion of Composite Inclusions/steel Matrix in Steel. (eds.) 第十二屆中國鋼鐵年會論文集——2.煉鋼與連鑄 (pp.510-517).

[8]史先菊, 李光強, 李軍 & 劉代飛. (2019). Study on Sintering Technology of Specularite with High Ratio. (eds.) 第十二屆中國鋼鐵年會論文集——1.煉鐵與原料 (pp.137-143).

[9]侯延輝, 劉林利, 李光強, 李騰飛 & 劉昱. (2019). The Correlation between Potential Difference and Galvanic Corrosion of Composite Inclusions/Steel Matrix in Steel. (eds.) 第十二屆中國鋼鐵年會論文集——大會特邀報告&分會場特邀報告 (pp.160).

[10]Liu, Y.; Wu, L.; Zhang, J.F.; Shu, S.S.; Liu, J.M.; Xu, J.H.; Li, G.Q.; Hu, Y.; Cheng, S.; Zhang, R.; Tong, L.*.Preparation and Properties of Chromium-Free Corrosion-Resistant Coatings for Oriented Silicon Steel????(Open Access).2019 5th International Conference on Applied Materials and Manufacturing Technology, ICAMMT 2019, 2019-06-21 To 2019-06-23.

[11]Wang, Q; Wang, X J; Li, G Q; Liu, Y.Investigation on Band Segregate Formation during the Electroslag Remelting of H13 Die Steel.Joint 5th International Conference on Advances in Solidification Processes, ICASP 2019 and 5th International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining, CSSCR 2019, Austria, 2019-06-17 to 2019-06-21.

[12]Li, Shenghao; Huang, Ao*; Qu, Yuntao; Lu, Xin; Gu, Huazhi; Li, Guangqiang.Mathematical simulation and physical modeling of self-source magnetization by liquid electrolyte flow.3rd International Conference on Materials Sciences and Nanomaterials, ICMSN 2019 and the 3rd International Conference on Advanced Manufacturing and Materials, ICAMM 2019, 2019-05-29 To 2019-05-31.

[13]王肸杰, 王強, 李光強, 張釗, 劉昱 & 趙棟. (2018). Cleanliness of hot-work die steel H13 produced by EAF+LF+VD+ESR. (eds.) 2018年（第二十屆）全國煉鋼學術會議大會報告及論文摘要集 (pp.230).

[14]Li G*; Long X Y; Cui S S; Huang Q W; Chen Z P; Tan S H.Influence of zinc coating on anisotropic mechanical properties of hot dip galvanized steel sheet DP600.NUMISHEET 2018: 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes , Japan, 2018-07-30 to 2018-08-03.

[15]Wang Qiang; Chen Zhiyuan; Li Guangqiang; Yang Yongxiang.Numerical simulation of magnetohydrodynamic two-phase flow and heat transfer in electroslag refining of electrolytic manganese metal.7th International Congress on Science and Technology of Steelmaking, ICS 2018, Italy, 2018-06-13 to 2018-06-15.

[16]Guangqiang LI; Guojun Ma.Approach of heat recovery from BF slag and CO2 absorption by steelmaking slags in China.2018日本鐵鋼協會春季大會, 2018-04-01.

[17]汪勇, 朱誠意, Jürgen Schneider, 周博文, 李光強, 劉昱 & 侯若谷. (2017). Effect of Normalizing and Annealing Temperature on Microstructure and Texture of 2.4%Si Cold-rolled Non-oriented Silicon Steel. (eds.) 第十四屆中國電工鋼學術年會論文集 (pp.89-96).

[18]曹羽鑫, 李光強 & 侯延輝. (2017). Correlation between Work Function and Inducing Pitting Corrosion Mechanism of Inclusion Different Surface. (eds.) 第十一屆中國鋼鐵年會論文集——S06.鋼鐵材料 (pp.304-312).

[19]王強, 汪瑞婷, 劉昱, 張釗, 李光強 & 李寶寬. (2017). Numerical Analysis of Inclusion Motion Behavior in Electroslag Remelting Process. (eds.) 第十一屆中國鋼鐵年會論文集——S02.煉鋼與連鑄 (pp.337-340).

[20]鄭萬, 熊珊, 付學好, 瞿勇 & 李光強. (2017). Al/Ti-Mg脫氧鋼中夾雜物誘發點蝕行為的研究. (eds.) 2017年全國高品質特殊鋼生產技術研討會論文摘要 (pp.23).

[21]Qiang Wang; Guangqiang Li; Baokuan Li.A three-phase comprehensive mathematical model of desulfurization in electroslag remelting process.2017日本鐵鋼協會秋季大會, 2017-10-01.

[22]WANG Qiang; LIU Yu; HE Zhu; LI Guangqiang; LI Baokuan; QIAO Wenwei.Numerical Investigation of Desulfurization Behavior in Electroslag Remelting Process.The 7th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking, 2017-08-16.

[23]WANG Ruiting; WANG Qiang; LI Guangqiang; LIU Yu; LI Baokuan; QIAO Wenwei.Numerical Simulation of Inclusion Movement in Electroslag Remelting Process.The 7th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking, 2017-08-16.

[24]陳先紅, 朱誠意, 李光強 & 付勇. (2016). Influence of Niobium and Chromium on the High Temperature Microstructure Evolution and Behaviors of Inhibitors of As-cast Grain-oriented Silicon Steel. (eds.) 第一屆先進材料前沿學術會議論文集（《材料導報》2016年第30卷第Z1期） (pp.97-105).

[25]ZHANG Bowen; MA Beiyue; YIN Yue; LI Shiming; ZHANG Zhan; LI Guangqiang; YU Jingkun.Phase Formation and Process Analysis of SiC-Al2O3-Al6Si2O13 Composite Powders via Carbothermal Reduction of Fly Ash at 1550℃.第七屆國際耐火材料學術會議(ISR2016), 2016-09-20.

[26]LIU Yu; LI Guangqiang; ZHANG Zhao; WANG Li.Effect of the Tundish Lining on the Steel Cleanliness.第七屆國際耐火材料學術會議(ISR2016), 2016-09-20.

[27]陳先紅; 朱誠意; 李光強; 付勇.Nb、Cr含量對鑄態取向硅鋼高溫組織演變及抑制劑析出行為的影響.《材料導報》雜志社, 中國,陜西省,西安市.

[28]Li Guangqiang; Zhu Chengyi; Zhang Junying.Education programs and activities in China for the sustainability of metallurgical industry and their perspective.REWAS 2016: Towards Materials Resource Sustainability - TMS 2016: 145th Annual Meeting and Exhibition , 2016-02-14 to 2016-02-18.

[29]王健, 樊希安, 吳朝陽 & 李光強. (2015). Novel Soft Magnetic Composites Materials Prepared by In-situ Chemical Deposition Process Combined with High Temperature Sintering. (eds.) 第十屆中國鋼鐵年會暨第六屆寶鋼學術年會論文集II (pp.1355-1362).

[30]萬響亮, 許德明 & 李光強. (2015). Effect of Grain Refinement on Deformation Mechanism and Mechanical Properties of 301LN Austenitic Stainless Steel. (eds.) “第十屆中國鋼鐵年會”暨“第六屆寶鋼學術年會”論文集 (pp.284-289).

[31]張帆, 李光強, 萬響亮 & 陳兆平. (2015). Thermodynamics and Kinetic of Ti N Precipitation in Ultra-Pure Ferritic Stainless Steel. (eds.) 第十屆中國鋼鐵年會暨第六屆寶鋼學術年會論文集II (pp.575-580).

[32]Yanhui Hou; Guangqiang Li.First-principles research on thermal strain mechanism of ferrite nucleation induced by magnesium oxide inclusions.1st International Conference on Computational Design and Simulation of Materials(第一屆材料計算設計與模擬國際會議), 2015-08-17.

[33]Chen, Xianhong; Zhu, Chengyi; Li, Guangqiang; Fu, Yong; Jiang, Yulong.Research on evolution of inclusions and removal rate of oxides in grain-oriented silicon steel during RH refining process.6th International Congress on the Science and Technology of Steelmaking, ICS 2015, 2015 to 2015-05-14.

[34]Li, Guangqiang; Zheng, Wan; Li, Peng; Wu, Zhenhua; Zhu, Chengyi; Matsuura, Hiroyuki; Tsukihashi, Fumitaka.Characterization of oxides and sulphide inclusions in Al-Ti complex deoxidized steels.6th International Congress on the Science and Technology of Steelmaking, ICS 2015, 2015 to 2015-05-14.

[35]Xue, Ping; Li, Guangqiang; Qin, Qingwei.Recovery of copper from slow cooled ausmelt furnace slag by floatation.Characterization of Minerals, Metals, and Materials 2015 - TMS 2015 144th Annual Meeting and Exhibition, 2015-03-15 to 2015-03-19.

[36]周博文, 李光強, 朱誠意, 付勇 & 張峰. (2014). 錫對取向硅鋼中抑制劑析出行為及顯微組織的影響. (eds.) 2014中國功能材料科技與產業高層論壇摘要集 (pp.89).

[37]Zhu Chengyi; Chen Xianhong; Zhang Feng; Li Guangqiang; Fu Yong.Effects of RE on precipitation behaviors of the inclusions and magnetic properties of non-oriented electrical steel.2014中國功能材料科技與產業高層論壇摘要集, 2014-01-01.

[38]Guangqiang LI; Muxing GUO; Zhan ZHANG; Hongwei NI.Current Development and Fundamental Researches of Ironmaking and Steelmaking Slag Valorisation in China.2014日本鐵鋼協會春季大會, 2014-04-01.

[39]Chen Xian Hong; Zhu Cheng Yi; Deng Li; Li Guang Qiang.Precipitation behavior of the second phase particles in grain oriented silicon steel slabs under different reheating conditions.2014 Spring International Conference on Material Sciences and Technology, MST-S 2014, 2014-04-16 to 2014-04-18.

[40]Yang, Zhi Zheng; Li, Guang Qiang; Rao, Jiang Ping; Wang, Yan Feng; Huang, Cheng Hong; Hong, Xia.Reasearch and application of basic tundish covering flux

[41]楊宏偉, 李光強, 周耀, 張峰 & 朱誠意. (2013). The Effect of Ladle Top Slag Reforming on the Distribution of Mn between Slag and Liquid Steel. (eds.) 第十七屆（2013年）全國冶金反應工程學學術會議論文集（下冊） (pp.148-155).

[42]鄭萬, 屠浩, 李光強, 程輝武, 朱誠意 & 谷繼剛. (2013). Study on water model of slag entrapment and molten steel exposed to atmosphere in refining process of bottom blowing argon in 250t ladle. (eds.) 第十七屆（2013年）全國冶金反應工程學學術會議論文集（下冊） (pp.453-460).

[43]周耀, 李光強, 楊宏偉, 張峰 & 朱誠意. (2013). Behavior of nonmetallic inclusions in Ultra-low Carbon AI-Si killed steel during refining process and its impact on microstructure. (eds.) 第十七屆（2013年）全國冶金反應工程學學術會議論文集（上冊） (pp.227-237).

[44]Pi, Zhao Hui; Li, Guang Qiang; Xiao, Yan Ping; Zhang, Zhan; Zhao, Zhuo; Yang, Yong Xiang.An Experimental Investigation on the Solubility of Zr in Cu-Sn Alloys.2013 4th International Conference on Advances in Materials and Manufacturing, ICAMMP 2013, 2013-12-18 to 2013-12-19.

[45]Li, Guang Qiang; Wang, Heng Hui; Yang, Jian; Ma, Jiang Hua.Preparation of iron carbide from high phosphorus oolitic hematite.2013 3rd International Conference on Chemical, Metallurgical Engineering, ICCMME 2013, 2013-12-10 to 2013-12-11.

[46]Wu, Zhao Yang; Li, Guang Qiang; Fan, Xi'an; Xu, Yu Meng; Zhang, Zhan; Wan, Xiang Liang.Microstructure and properties of Fe-6.5wt%si alloys cores with core-shell structures prepared by mechanical alloying and spark plasma sintering methods.2013 3rd International Conference on Chemical, Metallurgical Engineering, ICCMME 2013, 2013-12-10 to 2013-12-11.

[47]Zhang, Zhan; Li, Guang Qiang; Yang, Yong Xiang; Xiao, Yan Ping.Thermodynamics of the vitrified bottom ash slag from municipal solid waste incinerators-phase relations of CaO-SiO₂-Na₂ oxide system.2013 3rd International Conference on Chemical, Metallurgical Engineering, ICCMME 2013, 2013-12-10 to 2013-12-11.  

[48]Zhizheng YANG; Guangqiang LI; Chenghong HUANG.Win Ore Smelting Reduction Based on Double Slag Operation in BOF.Materials Processing and Manufacturing III, Part 1: Selected, peer reviewed papers from the 3rd International Conference on Advanced Engineering Materials and Technology (AEMT 2013), May 11-12, 2013, Zhangjiajie, China , 2013-05-11.

[49]Yang, Zhi Zheng; Li, Guang Qiang; Huang, Cheng Hong; Ding, Jin Fa.Mn ore smelting reduction based on double slag operation in BOF.3rd International Conference on Advanced Engineering Materials and Technology, AEMT 2013, 2013-05-11 to 2013-05-12.

[50]Li, Guang Qiang; Zhou, Bo Wen; Schneider, Juergen; Kawalla, Rudolf.Effect of thermal treatment after hot rolling on the microstructure of fe-2.4wt.%si.7th International Conference on Physical and Numerical Simulation of Materials Processing, ICPNS 2013, 2013-06-16 to 2013-06-19.

[51]朱誠意, 謝軍, 鐘賢岱, 李光強 & 柯昌明. (2012). Influential Mechanism of Titanium on Precipitating of Inclusions and Corrosion Resistance of 409 Stainless Steel. (eds.) 2012年全國冶金物理化學學術會議專輯（上冊） (pp.85-92).

[52]Hong, Xiaojie; Fan, Xi'an; Wu, Zhaoyang; Wang, Guoqiang; Zhu, Chengyi; Li, Guangqiang; Hou, Yanhui.Preparation and microstructure control of one-dimension core-shell heterostructure of Te/Bi, Te/Bi₂Te₃ by microwave assisted chemical synthesis.Chinese Materials Congress 2012, CMC 2012, 2012-07-13 to 2012-07-18.

[53]Zhu, Chengyi1*; Liu, Jun2; Li, Guangqiang3; Chen, Zhaoping3.Dephosphorization ability estimation of FetO-rich demanganization slag during hot metal pre-treatment.2012 Spring International Conference on Material Sciences and Technology, MST-S, 2012-05-27 to 2012-05-30.

[54]Zhu, Chengyi1*; Zheng, Jianxin1; Li, Guangqiang1; Zheng, Wan1.Effect of titanium on the precipitating behavior of inclusions and corrosion resistance of niobium stabilized 409 ferrite stainless steel.3rd International Conference on Material and Manufacturing Technology, ICMMT 2012, 2012-05-05 to 2012-05-06.

[55]張峰, 馬長松, 王波, 馬志剛, 張毅 & 李光強. (2011). Control of Inclusions of Non-Oriented Silicon Steel Sheets By RE Treatment. (eds.) 第八屆（2011）中國鋼鐵年會論文集 (pp.1333-1338).

[56]樊希安,王國強,洪小杰,李光強,鮑思前,宋新莉... & 侯艷輝. (2011). Bi₂Te₃基核殼異質結構納米線的合成與熱電性能. (eds.) 2011中國材料研討會論文摘要集 (pp.47-48).

[57]廖廣府; 陳敏; 張峰; 李光強; 袁綱; 張元福; 李寶寬.兩流中間包鋼液流動物理數學模擬.第十五屆(2011年)冶金反應工程學會議, 中國,遼寧省,沈陽市, 2011-08-01.

[58]朱誠意; 李光強; 陳兆平; 夏幸明; 洪小杰.魚雷罐中鐵水預處理噴粉脫錳的動力學模型.第十五屆(2011年)冶金反應工程學會議, 中國,遼寧省,沈陽市, 2011-08-01.

[59]王建鋒, 肖愛達, 李光強, 溫德智 & 傅杰. (2010). Study on Cleanliness of Ti Microalloyed Pipe Line Steel Produced by BOF-LF-CC Route. (eds.) 2010年全國冶金物理化學學術會議專輯（下冊） (pp.103-107). 

[60]Wang Jianfeng*; Li Guangqiang; Xiao Aida; Fu Jie.Nano-Scaled Fe₃C Precipitates and Precipitation Strengthening in Hot Rolled Low Carbon High Strength Titanium Microalloyed Steel.International Conference on Advances in Materials and Manufacturing Processes, 2010-11-06 to 2010-11-08.

[61]Hou Yanhui*; Liu Zhiyi; Li Guangqiang; Xia Qingkun.Modeling of thermal exposure effect on the microstructure evolution and properties of high Cu/Mg ratio Al-Cu-Mg-Ag alloys.International Conference on Advances in Materials and Manufacturing Processes, 2010-11-06 to 2010-11-08.

[62]樊希安; 王國強; 洪小杰; 李光強; 鮑思前; 宋新莉; 朱誠意; 侯艷輝.Bi₂Te₃基核殼異質結構納米線的合成與熱電性能.中國材料研究學會, 中國,黑龍江省,綏化市,北林區.

[63]李寶寬; 王芳; 李光強.電渣重熔過程電場、磁場和焦耳熱場研究.中國金屬學會特鋼分會、特鋼冶煉學術委員會2010年會, 中國,湖北省,黃石市, 2010-10-20.

[64]陳敏; 廖廣府; 李光強; 袁剛; 肖尊湖; 蘇風光.210t頂底復吹轉爐水模型實驗研究.第十四屆冶金反應工程學學術會議, 中國,貴州省,貴陽市, 2010-08-18.

[65]廖廣府; 陳敏; 李光強; 張浩; 肖尊湖; 蘇風光.210t轉爐濺渣護爐水模擬.第十四屆冶金反應工程學學術會議, 中國,貴州省,貴陽市, 2010-08-18.

[66]Wang, Wei; Ma, Guojun; Li, Guangqiang; Xue, Zhengliang; Yang, Jianguo; Xiong, Wei; Cheng, Changgui.The Construction of the Metallurgical Engineering State Specialty.International Conference on Eduction and Sports Education, 2010-07-17 to 2010-07-18.

[67]Li, Guangqiang*; Xiao, Aida; Wen, Dezhi; Jiao, Guohua; Zheng, Baiping; Fu, Jie.Study on the production of Ti micro-alloyed high strength hot rolled steel by CSP process.7th Pacific Rim International Conference on Advanced Materials and Processing, PRICM-7, 2010-08-02 to 2010-08-06.

[68]肖愛達, 溫德智, 焦國華, 鄭柏平, 李光強, 傅杰 & 陳建新. (2009). Production Technology of Ti Microalloyed High-Strength Steel by CSP in LY Steel. (eds.) 第七屆(2009)中國鋼鐵年會大會論文集(中) (pp.874-878).

[69]王曉明, 李光強, 張艷芳, 肖溦 & 呂潔. (2009). Kinetic Analysis of Iron Carbide Formation by Two-Step Method in H₂-CO-CO₂ Mixtures with 1%V₂O₃ Addition. (eds.) 第十三屆（2009年）冶金反應工程學會議論文集 (pp.138-149).

[70]肖愛達; 溫德智; 李光強; 王建峰.漣鋼CSP高鈦微合金鋼結晶器保護渣的開發.2009年薄板坯連鑄連軋國際研討會(TSCR 2009), 中國,江蘇省,南京市, 2009-05-13.

[71]李光強; 王建鋒; 溫德智; 肖愛達; 傅杰.轉爐-CSP流程生產低成本低合金高強度鋼——鈦微合金化管線鋼的初步探討.2009年薄板坯連鑄連軋國際研討會(TSCR 2009), 中國,江蘇省,南京市, 2009-05-13.

[72]Li Guang-qiang; Wang Jian-feng; Wen De-zhi; Xiao Ai-da; Fu Jie.Low Cost HSLA-Steel Produced by BOF-CSP Process: A Primary Study on Ti Microalloyed Pipe Line Steel.International Symposium on Thin Slab Casting and Rolling, 2009-05-13 to 2009-05-15.

[73]Xiao Ai-da; Wen De-zhi; Li Guang-qiang; Wang Jian-feng.Development of CSP Mold Powder for Casting High-Ti Micro-Alloyed Steel in Lianyuan Steel.International Symposium on Thin Slab Casting and Rolling, 2009-05-13 to 2009-05-15.

[74]Zhang F; Li G.Control of ultra-low titanium in ultra-low carbon Al-Si killed steel.Materials Science and Technology Conference and Exhibition 2009, MS and T'09, 2009-10-25 to 2009-10-29.

[75]秦慶偉, 張麗琴, 黃自力, 李密, 李光強 & 廖廣東. (2008). An Investigation on Cu Recovery from Copper Reverberatory Slag. (eds.) 第十二屆冶金反應工程學術會議論文集 (pp.19-24).

[76]熊瑋, 李光強, 陳兆平, 蔣曉放 & 楊治爭. (2008). Kinetic Modeling of Direct Alloying with Manganese Ore in Top and Bottom Combined Blown Converter. (eds.) 第十二屆冶金反應工程學術會議論文集 (pp.375-379).

[77]何強, 李光強, 馬江華 & 倪紅衛. (2008). Study on Reaction Kinetics of Promoting Iron Carbide Formation by V₂O₅ Additive. (eds.) 2008年全國冶金物理化學學術會議論文集 (pp.198-202).

[78]朱誠意, 李光強, 張峰 & 劉君. (2008). In-situ Preparation of Al(Si)/AlN Composites Using Al-Mg Alloy Reacting with Quartz under N₂ and Its Thermodynamical Analysis. (eds.) 2008年全國冶金物理化學學術會議專輯（上冊） (pp.17-21).

[79]張鵬科, 李光強, 朱誠意 & 馬國軍. (2008). Composition Adjustment and Vanadium Enrichment of V-Bearing BOF Slag by Carbothermal Reduction. (eds.) 2008年全國冶金物理化學學術會議專輯（下冊） (pp.193-197).

[80]肖愛達; 溫德智; 焦國華; 鄭柏平; 李光強; 傅杰; 陳建新.漣鋼CSP Ti微合金化高強度鋼的生產工藝研究.中國金屬學會.

[81]肖愛達; 李光強; 溫德智.殘余元素對漣鋼CSP熱冷軋卷質量的影響.第三屆寶鋼學術年會(Baosteel BAC 2008), 中國,上海市, 2008-01-01.

[82]朱誠意; 李光強; 陳兆平; 劉君; 夏幸明.2CaO·SiO₂和MgO同時飽和的轉爐渣與低Mn鋼水間錳與磷的分配平衡.第三屆寶鋼學術年會(Baosteel BAC 2008), 中國,上海市, 2008-01-01.

[83]Wang Wei; Zhu Chengyi; Chen Zhaoping; Li Guangqiang; Xia Xingming.A kinetic model for hot metal pretreatment in a torpedo car.4th International Congress on the Science and Technology of Steelmaking, ICS 2008, 2008-10-06 to 2008-10-08.

[84]Li Guangqiang; Chen Zhaoping; Jiang Xiaofang; Xiong Wei; Tsukihashi Fumitaka.A model for Mn ore smelting reduction in BOF process.4th International Congress on the Science and Technology of Steelmaking, ICS 2008, 2008-10-06 to 2008-10-08.

[85]Yang Zhizheng; Li Guangqiang; Liu Zhanzeng; Jiang Yanghu; Zhou Youyu.Causes for scabbing defect on SS400 hot-rolled strip and solving measures.4th International Congress on the Science and Technology of Steelmaking, ICS 2008, 2008-10-06 to 2008-10-08.

[86]陳兆平, 朱誠意, 夏幸明, 李光強 & 劉君. (2007). Phosphorus Distribution Equilibrium between Fe_tO-rich Hot Metal Demanganese Pretreatment CaO-Fe_tO-SiO₂-MnO-P₂O₅(-Al₂O₃ or MgO)Slags and Carbon Saturated Iron. (eds.) 2007中國鋼鐵年會論文集 (pp.691).

[87]朱誠意; 陳兆平; 李光強; 夏幸明; 劉君.高FetO鐵水脫錳CaO-Fe_tO-SiO₂-MnO-P₂O₅渣與碳飽和鐵中錳的分配平衡.2007年中國鋼鐵年會, 中國,四川省,成都市, 2007-11-15.

[88]李光強; 廖繼勇.燒結煙氣脫硫脫硝技術的發展與應用現狀.中國金屬學會, 中國,四川省,成都市.

[89]Ni, H. W.; He, H.; Li, G. Q.; Zhan, W. T.; Cang, D. Q.; Dan, Z. G..Microstructure of 430L stainless steel powders during high-energy ball milling.6th Pacific Rim International Conference on Advanced Materials and Processing, 2007-11-05 to 2007-11-09.

[90]朱誠意, 陳兆平, 李光強, 夏幸明 & 劉君. (2007). Manganese Distribution Equilibrium between Fe_tO-rich CaO-Fe_tO-SiO₂-MnO-P₂O₅ Slags and Carbon Saturated Iron. (eds.) 2007中國鋼鐵年會論文集 (pp.717-718).

[91]李光強 & 廖繼勇. (2007). The Development and Application Status of Desulphurization and Denitration of Sinter Plant Waste Gas. (eds.) 2007中國鋼鐵年會論文集 (pp.1112).

[92]馬江華, 李光強 & 朱誠意. (2006). Effect of Oxidation-Reduction Process on Apparent Density of Copper Powder. (eds.) 2006年全國冶金物理化學學術會議論文集 (pp.131-134).

[93]李光強, 朱誠意 & 張軍穎. (2005). PROGRESSES IN CHEMICAL COMPOSITION SENSORS FOR LIQUID STEEL AND THEIR APPLICATIONS. (eds.) 2005中國鋼鐵年會論文集（第4卷） (pp.756-761).

[94]何航; 倪紅衛; 李光強; 劉靜; 趙惠忠.高能球磨制備430L不銹鋼納米晶粉末.第十屆全國冶金反應工程學學術會議, 2005-11-17.

[95]朱誠意; 李光強; 秦慶偉.煉鋼電弧爐爐塵處理工藝進展.第十屆全國冶金反應工程學學術會議, 2005-11-17.

[96]彭其春; 楊成威; 李光強; 鄒衛軍; 王寶輝; 溫德智.漣鋼CSP生產線LF精煉夾雜物控制探討.2005中國鋼鐵年會, 中國,北京市, 2005-10-01.

[97]Li, Guangqiang; Hamano, Tasuku; Tsukihashi, Fumitaka.Thermodynamics of dephosphorization of molten steel by MgO saturated CaO-Fe_tO-SiO₂-Na₂O, Al₂O₃ fluxes.ICS 2005 - 3rd International Congress on the Science and Technology of Steelmaking, 2005-05-09 to 2005-05-12.

[98]汪正保, 劉靜, 李光強, 唐樹營 & 張鑫. (2004). Study of Nanocrystalline Stainless Steel by Mechanical Alloying. (eds.) 第七屆全國顆粒制備與處理學術暨應用研討會論文集 (pp.77-80).

[99]彭其春; 李光強; 朱誠意.稀土元素對Fe-Cr-Al系合金抗氧化性的影響.第八屆稀土在鋼中應用技術研討會, 中國,湖北省,武漢市, 2003-10-29.

[100]李光強; 彭其春; 章奉山.日本鋼鐵廠的少渣冶煉工藝和鋼渣再利用.2003年冶金能源環保生產技術會議, 中國,北京市, 2003-10-29.

[101]隋智通; 張力; 婁太平; **楠; 王明玉; 李光強; 陳厚生.冶金渣中有價金屬的綠色分離技術.2003年全國礦產資源高效開發和固體廢物處理處置技術交流會, 中國,云南省,昆明市, 2003-08-25.