|
2019年：
[1]Yuan Gao, Chaozhi Wang, Jiang Li, Shaoyun Guo. Adjustment of dielectric permittivity and loss of graphene/thermoplastic polyurethane flexible foam: Towards high microwave absorbing performance. Composites Part A, 2019, 117, 65-75.
[2]周茜,張瑤,陳蓉,沈佳斌,郭少云.SiO_(2)表面改性對高填充SiO2/聚四氟乙烯復合薄膜性能的影響[J/OL].復合材料學報:1-10[2019-12-21].https://doi.org/10.13801/j.cnki.fhclxb.20191219.002.
[3]唐銳,李姜,郭少云.交替層狀受限空間下聚偏氟乙烯橫晶的調控與結晶動力學[J].高分子材料科學與工程,2019,35(10):55-60.
[4]彭爽娟,李春海,吳宏,郭少云.流動場誘導成核劑TMC-300取向分布對聚乳酸性能的影響[J].高分子材料科學與工程,2019,35(09):109-113.
[5]朱一凡,李姜,郭少云.多級拉伸擠出制備右旋聚乳酸/左旋聚乳酸復合材料的結構與性能[J].高分子材料科學與工程,2019,35(09):62-66.
[6]羅莎,沈佳斌,郭少云.高儲能密度聚合物基介電復合材料的研究進展[J].高分子通報,2019(08):14-21.
[7]李雪健,熊英,郭少云.球磨法制備聚氯乙烯/氯化聚乙烯復合粒子及其對聚氯乙烯的增韌作用[J].高分子材料科學與工程,2019,35(07):100-107.
[8]王晴雯,董仁瓊,吉笑盈,沈佳斌,郭少云.TPU/EVA/CNT雙逾滲導電復合材料的制備和性能[J].高分子材料科學與工程,2019,35(05):104-109.
[9]潘瑞,陳蓉,吳宏,郭少云.聚丁二酸丁二醇酯載藥體系釋藥通道調控及其對藥物釋放行為的影響[J].高分子材料科學與工程,2019,35(04):73-78+86.
[10]李頓,易龍飛,沈佳斌,郭少云.左旋聚乳酸/右旋聚乳酸立構晶復合材料的刮擦行為[J].高分子材料科學與工程,2019,35(04):95-100.
2018年：
[11]Huan Li, Xiaomeng Zhang, Jianfeng Wang, Chunhai Li, Shuai Liu, Hong Wu, Shaoyun Guo. The mechanism for the temperature-dependency of the interfacial interaction in polyamide/tin-fluoro-phosphate glass composites. Composites Science and Technology, 2018, 159, 273-282.
[12]Congmei Lin, Guansong He, Jiahui Liu, Liping Pan, Shijun Liu, Jiang Li, Shaoyun Guo. Construction and non-linear viscoelastic properties of nano-structure polymer bonded explosives filled with graphene. Composites Science and Technology, 2018, 160, 152-160.
[13]Mingtao Yang, Liangqiang Wei, Jiang Li, Shaoyun Guo. Effects of ultrasonic treatment on the transesterification of PC/PMMA blends. Polymer Engineering and Science, 2018, 58, 1508-1515.
[14]Yuan Gao, Xiaoyan Gao, Jiang Li, Shaoyun Guo. Improved microwave absorbing property provided by the filler's alternating lamellar distribution of carbon nanotube/ carbonyl iron/ poly (vinyl chloride) composites. Composites Science and Technology, 2018, 158, 175-185.
[15]Yuan Gao, Xiaoyan Gao, Jiang Li, Shaoyun Guo. Microwave absorbing and mechanical properties of alternating multilayer carbonyl iron powder-poly(vinyl chloride) composites. Journal of Applied Polymer Science, 2018, 135, 45846-45855.
[16]Jianfeng Wang, Mingtao Yang, Hong Wu, Shaoyun Guo. Mechanically Strong and Ductile Polypropylene/Poly(ethylene-co-octene) Blends Pre pared through Multi-Stretched Extrusion: Morphological Evolution, Toughening and Reinforcing Mechanism. Polymer-Plastics Technology and Engineering, 2018, 57, 417-428.
[17]Lichao Xia, Chunhai Li, Xiaomeng Zhang, Jianfeng Wang, Hong Wu, Shaoyun Guo. Effect of chain length of polyisobutylene oligomers on the molecular motion modes of butyl rubber: Damping property. Polymer, 2018, 141,70-78.
[18]Rui Zhou, Weiqiang Gao, Lichao Xia, Hong Wu, Shaoyun Guo. The study of damping property and mechanism of thermoplastic polyurethane/phenolic resin through a combined experiment and molecular dynamics simulation. Journal of Materials Science, 2018, 53, 9350-9362.
[19]Xiaoying Ji, Dayong Chen, Qingwen Wang, Jiabin Shen, Shaoyun Guo. Synergistic effect of flame retardants and carbon nanotubes on flame retarding and electromagnetic shielding properties of thermoplastic polyurethane. Composites Science and Technology, 2018, 163, 49-55.
[20]Huan Li, Shuai Liu, Tianci Zhang, Hong Wu, Shaoyun Guo. The evolution of the network structure in tin-fluoro-phosphate glass with increasing temperature. Journal of Non-Crystalline Solids. 2018, 492, 84-93.
[21]Chunhai Li, Ting Jiang, Jianfeng Wang, Shuangjuan Peng, Hong Wu, Jiabin Shen, Shaoyun Guo, Xi Zhang and Eileen Harkin-Jones. Enhancing the Oxygen-Barrier Properties of Polylactide by Tailoring the Arrangement of Crystalline Lamellae. ACS Sustainable Chemistry & Engineering, 2018, 6, 6247-6255.
[22]Xiao Liu, Ziru Zhao, Ying Xiong, Ping Yi and Shaoyun Guo. Cost-effective way to improve the optical properties of poly(methyl methacrylate)/poly(ethylene terephthalate) light scattering materials: drop coalescence. Applied Optics, 2018, 57, 2107-2114.
[23]Jianfeng Wang, Xiuxiu Jin, Xiaomeng Zhang, Hong Wu, Shaoyun Guo. Effect of tunable styrene content on achieving high-performance poly(styrene-b-ethylene-ran-butylene-b-styrene)/graphene oxide nanocomposites. Composites Science and Technology, 2018 164, 229-237.
[24]Chunhai Li, Jiwei Guo, Ting Jiang, Xiaomeng Zhang, Lichao Xia, Hong Wu, Shaoyun Guo, Xi Zhang. Extensional flow-induced hybrid crystalline fibrils (shish) in CNT/PLA nanocomposite. Carbon, 2018, 129, 720-729.
[25]Tianci Zhang, Shuai Liu, Huan Li, Hong Wu , Shaoyun Guo. The Enhancement Mechanism of Flowability and Modulus of PET/TFP-Glass Composites. Polymer Composites, 2018.
[26]Yu Zheng, Xiaoying Ji, Qingwen Wang, Jiabin Shen and Shaoyun Guo. Structural design of polyurethane/poly(butylene succinate)/polycaprolactone compounds via a multilayer-assembled strategy: achieving tunable triple-shape memory performances. RSC Advaces, 2018, 8, 42337-42345.
[27]Wang J, Jin X, Zhang X, Shaoyun Guo,et al. Achieving high-performance poly (styrene-b-ethylene-ranbutylene-b-styrene) nanocomposites with tannic acid functionalized graphene oxide[J]. Composites Science and Technology, 2018.
[28]Tan X, Li J, Guo S. Temperature-Dependent Order-to-Order Transition of Polystyrene-block-poly (ethylene-co-butylene)-block-polystyrene Triblock Copolymer under Multilayered Confinement[J]. Macromolecules, 2018.
[29]Xiaomeng Zhang, Jiajia Zhang, Lichao Xia, Jianfeng Wang, Chunhai Li, Fang Xu, Xianlong Zhang, Hong Wu, Shaoyun Guo, Achieving high-efficiency and robust 3D thermally conductive while electrically insulating hybrid filler network with high orientation and ordered distribution, In Chemical Engineering Journal, Volume 334, 2018, Pages 247-256
[30]Longfei Yi, Yang Xu, Dun Li, Jiabin Shen, Shaoyun Guo and Hung-Jue Sue. Fabrication of Scratch Resistant Polylactide with Multilayered Shishkebab Structure through Layer-Multiplying Coextrusion. Industrial & Engineering Chemistry Research, 2018, 57, 4320-4328.
[31]薛杰,王建峰,吳宏,郭少云.聚對苯二甲酸乙二醇酯/石墨烯的氧氣阻隔性能[J].高分子材料科學與工程,2018,34(10):46-49.
[32]徐昉,薛杰,李響,周楊,吳宏,郭少云.SiC-BN填料雜化柔性電絕緣高導熱材料[J].高分子材料科學與工程,2018,34(09):156-159+164.
[33]張瑤,陳蓉,郭少云.SiO_2/聚四氟乙烯復合薄膜的制備及力學性能[J].復合材料學報,2019,36(03):624-629.
[34]徐楊,李頓,沈佳斌,郭少云,Hung-Jue Sue.高分子材料刮擦行為研究進展[J].高分子學報,2018(10):1262-1278.
[35]董仁瓊,王晴雯,沈佳斌,郭少云.碳納米管在熱塑性聚氨酯中的交替多層分布及退火處理對復合材料導電性能的影響[J].高分子材料科學與工程,2018,34(07):95-99.
[36]宋杭嶺,韓艾純,張瑤,陳蓉,李姜,郭少云.聚三氟氯乙烯結晶形態調控對其高頻介電性能的影響[J].高分子材料科學與工程,2018,34(06):49-53.
[37]韓艾純,周虹汛,宋杭嶺,吳宏,郭少云,陳蓉.熔融共混制備聚己內酯基水蒸氣阻隔材料及其阻隔性能[J].高分子材料科學與工程,2018,34(05):126-130.
[38]孫秀茹,熊英,郭少云.氟硅橡膠熱空氣老化過程中的非阿累尼烏斯行為[J].高分子材料科學與工程,2018,34(05):116-120+125.
[39]殷敏,楊志,沈佳斌,郭少云.聚對苯二甲酸丁二醇酯(PBT)/阻燃劑填充PBT交替層狀復合材料阻燃和力學性能[J].高分子材料科學與工程,2018,34(04):32-36.
2017年：
[40]Xiaomeng Zhang, Jiajia Zhang, Chunhai Li, Jianfeng Wang, Lichao Xia, Fang Xu, Xianlong Zhang, Hong Wu, Shaoyun Guo, Endowing the high efficiency thermally conductive and electrically insulating composites with excellent antistatic property through selectively multilayered distribution of diverse functional fillers, In Chemical Engineering Journal, Volume 328, 2017, Pages 609-618
[41]Xiaomeng Zhang, Jiajia Zhang, Xianlong Zhang, Chunhai Li, Jianfeng Wang, Huan Li, Lichao Xia, Hong Wu, Shaoyun Guo, Toward high efficiency thermally conductive and electrically insulating pathways through uniformly dispersed and highly oriented graphites close-packed with SiC, In Composites Science and Technology, Volume 150, 2017, Pages 217-226
[42]Yu Y, Yang S, Yu H, Shaoyun Guo,et al. Temperature-Dependent Alternating α-or β-Transcrystalline Layers in Coextruded Isotactic Polypropylene Multilayered Films[J]. Macromolecules, 2017, 50(13): 5098-5106.
[43]Wang J, Jin X, Wu H, Shaoyun Guo,et al. Polyimide reinforced with hybrid graphene oxide@ carbon nanotube: Toward high strength, toughness, electrical conductivity[J]. Carbon, 2017, 123: 502-513.
[44]Li C, Jiang T, Wang J, Shaoyun Guo,et al. In Situ Formation of Microfibrillar Crystalline Superstructure: Achieving High-Performance Polylactide[J]. ACS Applied Materials & Interfaces, 2017.
[45]Zheng Y, Ji X, Yin M, Shaoyun Guo,et al. A Strategy for Fabricating Multiple Shape Memory Polymeric Materials via the Multilayer Assembly of Co-Continuous Blend[J]. ACS Applied Materials & Interfaces, 2017.
[46]Zheng Y, Li Y, Hu X, Shaoyun Guo,et al. Biocompatible Shape Memory Blend for Self-Expandable Stents with Potential Biomedical Applications[J]. ACS Applied Materials & Interfaces, 2017, 9(16): 13988-13998.
[47]Zhang X, Zhang J, Xia L,Shaoyun Guo, et al. A simple and consecutive melt extrusion method to fabricate thermally conductive composites with highly oriented boron nitrides.[J]. Acs Applied Materials & Interfaces, 2017.
[48]Wang J, Li C, Zhang X,Shaoyun Guo, et al. Polycarbonate toughening with reduced graphene oxide: Toward high toughness, strength and notch resistance[J]. Chemical Engineering Journal, 2017, 325:474-484.
[49]Xu L, Han T, Li J, Shaoyun Guo, et al. The cell growth-induced orientation of mica in lightweight flexible poly (vinyl chloride) foams and its enhancement on sound insulation[J]. Composites Science & Technology, 2017:78-88.
[50]Longfei Yi, Shanshan Luo, Jiabin Shen*, Shaoyun Guo*, and Hung-Jue Sue.Bioinspired Polylactide Based on the Multilayer Assembly of ShishKebab Structure: A Strategy for Achieving Balanced Performances. ACS Sustainable Chem. Eng., 2017, 5 (4), 3063–3073
[51]Jiaming Zhu, Xiaoying Ji, Min Yin, Shaoyun Guo, Jiabin Shen*.Poly(vinylidene fluoride) based percolative dielectrics with tunable coating of polydopamine on carbon nanotubes: Toward high permittivity and low dielectric loss. Compos. Sci. Technol.2017,144, 79-88
[52]Shanshan Luo, Longfei Yi, Yu Zheng, Jiabin Shen*, Shaoyun Guo*.Crystallization of polypropylene in multilayered spaces: controllable morphologies and properties. European Polymer Journal, 2017,89,138-149
[53]Ziru Zhao, Jiangdong Qiu, Ying Xiong*, Xiao Liu, Jiabin Shen, Shaoyun Guo. In-situ preparation of core-shell-like scatterers and their effects on optical and mechanical properties of PC-matrix light diffusing materials, Material and Design,2017, 115,355-363
[54]Li C, Luo S, Wang J, et al. Conformational Regulation and Crystalline Manipulation of PLLA through a Self-Assembly Nucleator[J]. Biomacromolecules, 2017, 18(4):1440.
[55]王朝,李姜,郭少云.超臨界CO_2下聚丙烯/乙烯-辛烯共聚物共混物微孔發泡材料的制備[J].高分子材料科學與工程,2017,33(10):108-113.
[56]方文祥,沈佳斌,李姜,吳宏,張先龍,陳蓉,郭少云.聚合物在受限層空間中的形態結構演變及相關性能研究進展[J].高分子通報,2017(10):23-32.
[57]黃亞江,葉林,廖霞,黃光速,淡宜,郭少云,陶友季,揭敢新,李光憲.復雜條件下高分子材料老化規律、壽命預測與防治研究新進展[J].高分子通報,2017(10):52-63.
[58]張佳佳,張曉朦,李姜,郭少云.聚丙烯/蒙脫土和聚丙烯/石墨烯交替多層材料的結構與氣體阻隔性能[J].高分子材料科學與工程,2017,33(09):35-38.
[59]劉帥,李環,吳宏,郭少云.聚對苯二甲酸乙二醇酯/錫氟磷酸鹽玻璃復合材料原位成纖對聚丙烯的增強效果[J].高分子材料科學與工程,2017,33(06):168-172.
[60]周虹汛,陳霞,張聰,陳蓉,吳宏,郭少云.熱熔法制備聚己內酯基溫敏性藥物釋放體系及其釋藥性能[J].高分子材料科學與工程,2017,33(06):126-130.
[61]徐文文,熊英,郭少云.硬質聚氯乙烯自然老化的變色行為與分子結構變化[J].高分子學報,2017(08):1374-1381.
[62]徐文文,陳紅,熊英,郭少云.苯乙烯-丙烯腈共聚物對聚氯乙烯加工性能及抗紫外老化行為的影響[J].高分子材料科學與工程,2017,33(05):118-123.
[63]陳大勇,吉笑盈,李姜,郭少云,沈佳斌.聚偏氟乙烯/聚甲基丙烯酸甲酯交替多層材料的熱穩定性[J].高分子材料科學與工程,2017,33(03):59-63.
2016年：
[64]Liyuan Shen, Lichao Xia, Teng Han, Hong Wu*, Shaoyun Guo. Improvement of hardness and compression set properties of EPDM seals with alternating multilayered structure for PEM fuel cells. International Journal of Hydrogen Energy, 2016,41(48), 23164-23172
[65]Shanshan Luo, Juan Xue, Ying Xiong, Jiabin Shen, Shaoyun Guo，Light-scattering properties of linear low density polyethylene/polystyrene films fabricated through layer-multiplying technology，J. APPL. POLYM. SCI. 2016
[66]Gao X, Li J, Gao Y, Guo S, Wu H, Chen R. Microwave absorbing properties of alternating multilayer composites consisting of poly (vinyl chloride) and multi-walled carbon nanotube filled poly (vinyl chloride) layers. Composites Science and Technology. 2016;130:10-9.
[67]Yu Zheng, Renqiong Dong, Jiabin Shen, Shaoyun Guo. Tunable shape memory performances via multilayer assembly of thermoplastic polyurethane and polycaprolactone. ACS Applied Materials & Interfaces, DOI:10.1021/acsami.5b10246.
[68]Wang Jianfeng, Wu Hong, Guo Shaoyun. Realizing simultaneous reinforcement and toughening in polypropylene based on polypropylene/elastomer via controlling crystalline structure and dispersed phase morphology. RSC Advances, 2016, 6: 1313-1323
[69]高衛強,夏立超,王成國,吳宏,郭少云.顆粒級配對乙烯基酯樹脂/石墨復合材料性能的影響[J].高分子材料科學與工程,2016,32(11):33-36.
[70]夏立超,吳宏,郭少云.低密度聚乙烯/蒙脫土復合材料的制備及隔聲性能[J].高分子材料科學與工程,2016,32(05):119-123.
[71]沈麗媛,韓騰,吳宏,郭少云.硫化劑含量及填料類型對三元乙丙橡膠性能的影響[J].高分子材料科學與工程,2016,32(05):64-68+74.
[72]陳霞,張聰,劉桂廷,陳蓉,郭少云.熱熔擠出過程藥物在聚己內酯中的分散形態及對藥物釋放行為的影響[J].高分子材料科學與工程,2016,32(01):115-119.
2015年：
[73]Xia L, Wu H, Guo S, et al. Enhanced sound insulation and mechanical properties of LDPE/mica composites through multilayered distribution and orientation of the mica[J]. Composites Part A: Applied Science and Manufacturing, 2015
[74]Zhang C, Chen X, Liu G,Guo S, et al. Preparation of alternating multilayered polyethylene oxide/poly (ε-caprolactone) and the confined crystallization of the composites[J]. RSC Advances, 2015, 5(120): 98999-99007.
[75]Zhang X, Wu H, Guo S, et al. Understanding in crystallization of polyethylene: the role of boron nitride (BN) particles[J]. RSC Advances, 2015, 5(121): 99812-99819.
[76]Yi P, Xiong Y, Guo S. Optical properties of polycarbonate/styrene-co-acrylonitrile blends: effects of molecular weight of the matrix[J]. Applied Optics, 2015, 54(34): 10000-10008.
[77]Luo S, Yi P, Xiong Y, Guo S,et al. Light‐scattering capacity of ethylene–vinyl acetate copolymers in polypropylene: Toward high haze and transmittance[J]. Journal of Applied Polymer Science, 2015.
[78]Liu X, Xiong Y, Shen J, Guo S,et al. Fast fabrication of a novel transparent PMMA light scattering materials with high haze by doping with ordinary polymer[J]. Optics express, 2015, 23(14): 17793-17804.
[79]Yang S, Yu H, Lei F, Li J, Guo S, Wu H, et al. Formation Mechanism and Morphology of β-Transcrystallinity of Polypropylene Induced by Two-Dimensional Layered Interface. Macromolecules. 2015.
[80]Zhu Jiaming, Shen Jiabing, Guo Shaoyun, Sue Hung-jue. Confined distribution of conductive particles in polyvinylidene fluoride-based multilayered dielectrics: Toward high permittivity and breakdown strength. Carbon. 2015;84:355-364.
[81]Xu Y, Xiong Y, Guo S. Issues Caused by Migration of Plasticizers from Flexible PVC and Its Countermeasures. Progress in Chemistry. 2015;27(2-3):286-296.
[82]Zhao Tianbao, Zhang Xianlong, Wu Hong, Guo Shaoyun, Sun Xiaojie, Liang Wenbing. Rheology, Morphology, and Mechanical Properties of HMSPP/POE Blends and its Alternate Layered Foam. Journal of Applied Polymer Science. 2015;132(4).
[83]Zhao Tianbao, Zhang Xianlong, Wu Hong, Guo Shaoyun, Sun Xiaojie, Liang Wenbing. Preparation of a new foam/film structure poly (ethylene-co-octene foam materials and its sound absorption properties. Materials Letters. 2015;139:275-278.
[84]Zhang F, He G, Xu K, Wu H, Guo S. The Damping and Flame-Retardant Properties of Poly(vinyl chloride)/Chlorinated Butyl Rubber Multilayered Composites. Journal of Applied Polymer Science. 2015;132(2).
[85]Zhang, Xian.Long, Wu, Hong, Guo, Shaoyun. The molecular structure of SEBS grafted with maleic anhydride through ultrasound initiation. Chinese J Polym Sci. 2015;33(7):988-999.
[86]Xu K, Zhang F, Zhang X, Guo J, Wu H, Guo S. Molecular insights into the damping mechanism of poly(vinyl acetate)/hindered phenol hybrids by a combination of experiment and molecular dynamics simulation. RSC Advances. 2015;5(6):4200-4209.
[87]Shan Wang,Amir Saffar,Abdellah Ajji,Hong Wu,, Guo SY. Fabrication of microporous membranes from melt extruded polypropylene precursor films via stretching: Effect of annealing. Chinese J Polym Sci. 2015;33(7):1028-1037.
[88]Wang M, Shen JB, Li J, Guo SY. Network alteration theory on Mullins effect in semicrystalline polymers. Polymer International. 2015;64(1):105-112.
[89]Su HJ, Xue J, Cai PL, Li J, Guo SY. Structure and oxygen-barrier properties of (linear low-density polyethylene/ethylene-vinyl alcohol copolymer)/linear low-density polyethylene composite films prepared by microlayer coextrusion. Journal of Applied Polymer Science. 2015;132(27).
[90]Gao W, Zheng Y, Shen J, Guo S. Electrical Properties of Polypropylene-Based Composites Controlled by Multilayered Distribution of Conductive Particles. ACS Applied Materials & Interfaces. 2015;7(3):1541-1549.
[91]Dong X, Xiong Y, Chen G, Guo S. Effect of the morphology on the anisotropic light scattering of polycarbonate (PC)/poly(styrene-co-acrylonitrile) (SAN)(70/30) blend. Applied Optics. 2015;54(4):608-614.
[92]Chen R, Qu HB, Guo SY, Ducheyne P. The design and synthesis of a soluble composite silica xerogel and the short-time release of proteins. J Mater Chem B. 2015;3(16):3141-3149.
[93]Han T, Wang X, Xiong Y, Li J, Guo S, Chen G. Light-weight poly (vinyl chloride)-based soundproofing composites with foam/film alternating multilayered structure. Composites Part A: Applied Science and Manufacturing. 2015;78:27-34.
[94]張建偉,熊英,郭少云,蔣成凱,朱忠猛,蔣晗.丁腈橡膠熱處理過程的時間-溫度-應力等效性[J].高分子材料科學與工程,2015,31(11):56-59.
[95]王建峰,張先龍,吳宏,郭少云.PP和PP/POE交替多層共混物的結構與力學性能[J].高分子材料科學與工程,2015,31(10):48-51.
[96]Chun-hai Li,Jian-feng Wang,Ji-wei Guo,吳宏,郭少云.The Toughening Behavior of the PP/POE Alternating Multilayered Blends under EWF and Impact Tensile Methods[J].Chinese Journal of Polymer Science,2015,33(10):1477-1490.
[97]易平,熊英,劉曉,趙梓汝,郭少云.PC/SAN共混體系微觀結構與光學性能的關系及性能優化[J].高分子材料科學與工程,2015,31(08):50-55.
[98]卓婕,熊英,陳光順,郭少云.硼酸鋅/三氧化鉬復配型阻燃抑煙劑對聚氯乙烯燃燒性能的影響[J].高分子材料科學與工程,2015,31(08):74-78.
[99]劉曉,熊英,郭少云.聚甲基丙烯酸甲酯基光散射材料的研究進展[J].光散射學報,2015,27(02):103-109.
[100]郭濟偉,馬燕瓊,吳宏,郭少云.增韌、耐熱聚乳酸交替層狀材料的制備與性能研究[J].塑料工業,2015,43(04):64-68.
[101]蔡佩伶,粟慧君,李姜,郭少云.PE–HD/(EVOH/PE–HD)交替多層復合材料的結構及氧氣阻隔性能研究[J].工程塑料應用,2015,43(03):7-12.
[102]徐楊,熊英,郭少云.軟質PVC制品中增塑劑遷移帶來的問題及應對[J].化學進展,2015,27(Z1):286-296.
[103]鄭宇,李穎,沈佳斌,郭少云.結晶行為對無定型/結晶聚合物共混體系形狀記憶性能影響的研究進展[J].高分子通報,2015(02):10-17.
2014年：
[104]Zhu J, Shen J, Guo S. In Situ Biaxial Stretching for the Platelet Formation of an Ethylene-Vinyl Alcohol Copolymer Through Multistage Stretching Extrusion and Its Effect on the Gas-Barrier Properties of Polyethylene. Journal of Applied Polymer Science. 2014;131(9).
[105]Zhang X, Zhou L, Pi H, Guo S, Fu J. Performance of layered double hydroxides intercalated by a UV stabilizer in accelerated weathering and thermal stabilization of PVC. Polymer Degradation and Stability. 2014;102:204-211.
[106]Zhang X, Jiang G, Wu H, Guo S. Effect of the temperature gradient on the interfacial strength of polyethylene/polyamide 6 during the sequential injection molding. High Performance Polymers. 2014;26(2):135-143.
[107]Zhang F, He G, Xu K, Wu H, Guo S, Zhang C. Damping Mechanism and Different Modes of Molecular Motion Through the Glass Transition of Chlorinated Butyl Rubber and Petroleum Resin Blends. Journal of Applied Polymer Science. 2014;131(13).
[108]Zhang F, He G, Xu K, Wu H, Guo S. The molecular dynamics of different relaxation modes in asymmetric chlorinated butyl rubber/petroleum resin blends. Rsc Advances. 2014;4(40):20620-20625.
[109]Zhang F, Guo M, Xu K, He G, Wu H, Guo S. Multilayered damping composites with damping layer/constraining layer prepared by a novel method. Composites Science and Technology. 2014;101:167-172.
[110]Yin C, Gao Y, Guo S, Tang H. A coupled three dimensional model of vanadium redox flow battery for flow field designs. Energy. 2014;74:886-895.
[111]Xu K, Zhang F, Zhang X, Hu Q, Wu H, Guo S. Molecular insights into hydrogen bonds in polyurethane/hindered phenol hybrids: evolution and relationship with damping properties. Journal of Materials Chemistry A. 2014;2(22):8545-8556.
[112]Wang M, Lin L, Peng QC, Ou WY, Li HL. Crystallization and Mechanical Properties of Isotactic Polypropylene/ Calcium Carbonate Nanocomposites with a Stratified Distribution of Calcium Carbonate. Journal of Applied Polymer Science. 2014;131(10).
[113]Wang J, Wang C, Zhang X, Wu H, Guo S. Morphological evolution and toughening mechanism of polypropylene and polypropylene/poly(ethylene-co-octene) alternating multilayered materials with enhanced low-temperature toughness. Rsc Advances. 2014;4(39):20297-20307.
[114]Wang J, Guo J, Li C, Yang S, Wu H, Guo S. Crystallization kinetics behavior, molecular interaction, and impact-induced morphological evolution of polypropylene/poly(ethylene-co-octene) blends: insight into toughening mechanism. Journal of Polymer Research. 2014;21(12).
[115]Shen J, Chen B, Zhu J, Guo S, Wang Y. Morphological evolution of thermotropic liquid crystalline copolyester and its effects on rheological, thermal and flame-retarding behaviors of polycarbonate. Polymer Degradation and Stability. 2014;102:74-80.
[116]Qiu F, Wang M, Hao Y, Guo S. The effect of talc orientation and transcrystallization on mechanical properties and thermal stability of the polypropylene/talc composites. Composites Part a-Applied Science and Manufacturing. 2014;58:7-15.
[117]Luo S, Yang Z, Shen J, Guo S. Toughening of Poly (Butylene Terephthalate) with Epoxy-Filled Poly (Ethylene-Octene) Copolymer. Journal of Macromolecular Science Part B-Physics. 2014;53(2):265-277.
[118]Li C, Yang S, Wang J, Guo J, Wu H, Guo S. Unique impact behavior and toughening mechanism of the polypropylene and poly(ethylene-co-octene) alternating multilayered blends with superior toughness. Rsc Advances. 2014;4(98):55119-55132.
[119]Lei F, Yang S, Yang M, Li J, Guo S. Exfoliation of organic montmorillonite in iPP free of compatibilizer through the multistage stretching extrusion. Polymer Bulletin. 2014;71(12):3261-3273.
[120]Jiang G, Zhang F, Wu H, Yan B, Guo S. Comparative Studies on Enhanced Interfacial Adhesion between PE and PA6 through Two Routes in a Sequential Injection Molding Process. Polymer-Plastics Technology and Engineering. 2014;53(1):9-18.
[121]He G, Zhang F, Huang L, Li J, Guo S. Evaluation of the Fracture Behaviors of Multilayered Propylene-Ethylene Copolymer/Polypropylene Homopolymer Composites with the Essential Work of Fracture. Journal of Applied Polymer Science. 2014;131(15).
[122]He G, Li J, Zhang F, Wang C, Guo S. Effect of multistage tensile extrusion induced fiber orientation on fracture characteristics of high density polyethylene/short glass fiber composites. Composites Science and Technology. 2014;100:1-9.
[123]He G, Li J, Zhang F, Lei F, Guo S. A quantitative analysis of the effect of interface delamination on the fracture behavior and toughness of multilayered propylene-ethylene copolymer/low density polyethylene films by the essential work of fracture (EWF). Polymer. 2014;55(6):1583-1592.
[124]Gao W, Shen J, Guo S. Effects of layer-multiplying process on conducting properties of multilayer composites consisting of alternating layers of carbon black/polypropylene and polyamide 6/polypropylene. Polymer Engineering and Science. 2014;54(6):1471-1476.
[125]Chen B, Gao W, Shen J, Guo S. The multilayered distribution of intumescent flame retardants and its influence on the fire and mechanical properties of polypropylene. Composites Science and Technology. 2014;93:54-60.
[126]Bao W, Wu H, Guo S, Paradkar A, Kelly A, Brown E, et al. Effect of Ultrasound on Molecular Structure Development of Polylactide. Polymer-Plastics Technology and Engineering. 2014;53(9):927-934.
[127]Zhao TB, Zhang XF, Wu H, Guo SY. Preparation and Characterization of 2-Hydroxy-4-Methoxy Benzophenone-5-Sulfonic Acid Intercalated MgAl Layered Double Hydroxides. Chinese J Inorg Chem. 2014;30(11):2607-2614.
[128]Wang J, Zhang X, Zhao T, Shen L, Wu H, Guo S. Morphologies and Properties of Polycarbonate/Polyethylene In Situ Microfibrillar Composites Prepared Through Multistage Stretching Extrusion. Journal of Applied Polymer Science. 2014;131(7).
[129]趙天寶,張曉飛,吳宏,郭少云.2-羥基-4-甲氧基二苯甲酮-5-磺酸插層水滑石的制備及性能(英文)[J].無機化學學報,2014,30(11):2607-2614.
[130]高萬里,陳寶書,沈佳斌,郭少云.聚丙烯/阻燃劑填充聚丙烯交替層狀復合材料的阻燃及力學性能研究[J].高分子學報,2014(10):1350-1355.
[131]鄭倩,郭少云,劉福華,袁晶,劉力瑋.高校專利激勵政策的效果分析和思考——以四川省“211”高校為例[J].知識經濟,2014(20):58-59.
[132]陳光順,鄧志偉,郭少云,李光憲.滑石粉粒徑及含量對PVC/滑石粉復合體系動態流變行為的影響[J].聚氯乙烯,2014,42(09):24-28.
[133]梁琨,李姜,郭少云.(聚丙烯-炭黑)/聚丙烯層狀復合材料的結構和電磁屏蔽性能[J].高分子材料科學與工程,2014,30(09):34-37.
[134]王萃林,吳宏,郭少云.α-PP/β-PP層狀交替復合物的結晶與熔融行為研究[J].塑料工業,2014,42(08):68-72.
[135]王溢,吳宏,郭少云.聚丁二酸丁二醇酯/聚乳酸交替多層復合材料的力學性能和降解行為[J].高分子材料科學與工程,2014,30(08):71-75+80.
[136]王成國,吳宏,郭少云.乙烯基酯樹脂/石墨雙極板復合材料的制備[J].高分子材料科學與工程,2014,30(08):125-129.
[137]趙文鵬,沈佳斌,郭少云.聚偏氟乙烯/導電炭黑填充聚偏氟乙烯層狀復合材料的電磁屏蔽性能研究[J].塑料工業,2014,42(07):93-96.
[138]薛娟,熊英,沈佳斌,郭少云.加工溫度對線型低密度聚乙烯/聚苯乙烯薄膜微觀形態及光散射性能的影響[J].高分子材料科學與工程,2014,30(07):60-66.
[139]陳光順,鄧志偉,郭少云,李光憲.力化學改性對PVC/滑石粉復合材料耐熱性能及力學性能的影響[J].聚氯乙烯,2014,42(06):17-20.
[140]陳紅,熊英,陳光順,陳蓉,郭少云.丙烯酸酯-苯乙烯-丙烯腈共聚物對聚氯乙烯紫外光老化性能的影響[J].高分子材料科學與工程,2014,30(06):42-47.
[141]趙麗娟,姚燕青,蔣文君,郭少云.自清潔聚氯乙烯型材的制備與性能[J].高分子材料科學與工程,2014,30(05):142-145.
[142]沈麗媛,吳宏,李姜,陳光順,郭少云.聚合物熔體超聲輔助加工的研究進展[J].高分子材料科學與工程,2014,30(02):205-209.
[143]王萃林,吳宏,郭少云.聚丙烯基共混體系拉伸流變配方設計[J].四川化工,2014,17(01):16-19.
2013年：
[144]Zhang X, Wu H, Guo S, Wang Y. Effect of phase morphology on water diffusion in phosphorus-containing thermotropic liquid crystal copolyester film. Polymer. 2013;54(20):5429-5436.
[145]Zhang X, Shen L, Wu H, Guo S. Enhanced thermally conductivity and mechanical properties of polyethylene (PE)/boron nitride (BN) composites through multistage stretching extrusion. Composites Science and Technology. 2013;89:24-28.
[146]Zhang X, Pi H, Guo S. Photostabilizing efficiency of ultraviolet light stabilizers for rigid poly(vinyl chloride) against photo-oxidation. Polymer Engineering and Science. 2013;53(2):378-388.
[147]Xiong Y, Chen G, Guo S, Li G. Lifetime prediction of NBR composite sheet in aviation kerosene by using nonlinear curve fitting of ATR-FTIR spectra. Journal of Industrial and Engineering Chemistry. 2013;19(5):1611-1616.
[148]Wang M, Shen J, Li J, Guo S. Effect of morphology on the interfacial slip of immiscible polypropylene/polystyrene blends. Rheologica Acta. 2013;52(10-12):963-972.
[149]Sun X, Yu Q, Shen J, Gao S, Li J, Guo S. In situ microfibrillar morphology and properties of polypropylene/polyamide/carbon black composites prepared through multistage stretching extrusion. Journal of Materials Science. 2013;48(3):1214-1224.
[150]Sun H, Liang K, Li J, Guo S. Real-time Monitoring the Vulcanization of EPDM Rubber with Ultrasound: A Study on the Reaction Kinetics. Journal of Macromolecular Science Part B-Physics. 2013;52(10):1341-1354.
[151]Shen L, Zhang X, Wu H, Guo S. Ultrasound initiated functionalization of SEBS with maleic anhydride. Journal of Applied Polymer Science. 2013;129(5):2686-2691.
[152]Lei F, Du Q, Li T, Li J, Guo S. Effect of phase morphology and interfacial strength on barrier properties of high density polyethylene/polyamide 6 membranes. Polymer Engineering and Science. 2013;53(9):1996-2003.
[153]Chen G, Deng Z, Lei X, Guo S, Li G. Modification of a Theoretical Model for the Prediction of the Thermal Expansion Behavior of Particulate Composites: Application to Poly(vinyl chloride)/Talc Composites. Journal of Macromolecular Science Part B-Physics. 2013;52(9):1309-1321.
[154]Wang X, Guo SY, Yang FH. Preparation of high heat-resistant profile based on PVC/alpha-MSAN/ABS ternary blends. Material Design, Processing and Applications, Parts 1-4. 2013;690-693:1581-1585.
[155]Chen R, Qu H, Agrawal A, Guo S, Ducheyne P. Controlled release of small molecules from silica xerogel with limited nanoporosity. Journal of Materials Science-Materials in Medicine. 2013;24(1):137-146.
[156]陳凡,李姜,郭少云.交替層狀PP/PPCB中β晶的形成及機理[J].高分子材料科學與工程,2013,29(09):107-109+113.
[157]沈佳斌,郭少云,李姜.聚合物微納層狀復合結構與性能的研究進展[J].高分子通報,2013(09):77-86.
[158]趙麗娟,許琪,姚燕青,郭少云.超聲波在線檢測高分子材料在流變儀中的擠出行為(I)[J].高分子材料科學與工程,2013,29(08):146-149+154.
[150]李根林,吳宏,郭少云.熱熔擠出法制備的雙氯芬酸鈉固體分散體系的溶出度[J].高分子材料科學與工程,2013,29(06):117-120.
[160]王忞,吳宏,郭少云.氟橡膠耐酸配方設計及基礎性能表征[J].高分子材料科學與工程,2013,29(03):60-63.
[162]董現明,熊英,任奕坤,薛娟,陳凡,郭少云.具有高散射能力的聚碳酸酯復合材料的制備與性能研究[J].高分子學報,2013(02):241-247.
2012年：
[163]Zou J, You F, Su L, Yang Z, Chen G, Guo S. The Peculiar Temperature Response of Dynamic Rheological Behaviors of Poly (Vinyl Chloride)/trioctyl Trimellitate (100/70) System. Journal of Macromolecular Science Part B-Physics. 2012;51(9):1869-1882.
[164]Zou J, You F, Su L, Yang Z, Chen G, Guo S. Failure mechanism of time-temperature superposition for poly(vinyl chloride)/dioctylphthalate (100/70) system. Journal of Applied Polymer Science. 2012;124(1):452-458.
[165]Zhang X, Zhao T, Pi H, Guo S. Preparation of intercalated Mg-Al layered double hydroxides and its application in PVC thermal stability. Journal of Applied Polymer Science. 2012;124(6):5180-5186.
[166]Zhang X, Pi H, Guo S. The Effect of High Intensity UV Irradiation on Color Behavior of Poly(Vinyl Chloride). Journal of Macromolecular Science Part B-Physics. 2012;51(7):1303-1321.
[167]You F, Chen G, Zou J, Yang Z, Guo S. The Experimental Results and Simulation of Temperature Dependence of Brittle-Ductile Transition in PVC/CPE Blends and PVC/CPE/Nano-CaCO3 Composites. Journal of Applied Polymer Science. 2012;123(3):1833-1842.
[168]Yang Z, Cao B, Zhu J, Shen J, Li J, Guo S, et al. Rheological, thermal, and mechanical properties of phosphorus-containing wholly aromatic thermotropic liquid crystalline polymer-filled poly(butylene terephthalate) composites. Polymer Composites. 2012;33(8):1432-1436.
[169]Wen M, Sun X, Su L, Shen J, Li J, Guo S. The electrical conductivity of carbon nanotube/carbon black/polypropylene composites prepared through multistage stretching extrusion. Polymer. 2012;53(7):1602-1610.
[170]Wang S, Lin C, Sun H, Chen F, Li J, Guo S. Ultrasonic characterization of phase morphology of high density polyethylene/polyamide 6 blend melts. Polymer Engineering and Science. 2012;52(2):338-345.
[171]Shen J, Li J, Guo S. The distribution and morphological evolution of dispersed phase in laminating-multiplying elements during extrusion. Polymer Composites. 2012;33(5):693-699.
[172]Shen J, Li J, Guo S. The origin of a new transition in dynamic mechanical spectra of multilayer polymeric composite. Polymer. 2012;53(12):2519-2523.
[173]Shen J, Champagne MF, Yang Z, Yu Q, Gendron R, Guo S. The development of a conductive carbon nanotube (CNT) network in CNT/polypropylene composite films during biaxial stretching. Composites Part a-Applied Science and Manufacturing. 2012;43(9):1448-1453.
[174]Shen J, Champagne MF, Gendron R, Guo S. The development of conductive carbon nanotube network in polypropylene-based composites during simultaneous biaxial stretching. European Polymer Journal. 2012;48(5):930-939.
[175]Peng B, Wu H, Bao W, Guo S, Chen Y, Huang H, et al. Ultrasound initiated maleic anhydride grafted onto a novel polypropylene copolymer. Polymer Engineering and Science. 2012;52(3):518-524.
[176]張奇,徐康銘,鄧俊杰,吳宏,郭少云.SEBS-g-MAH對PPO/HIPS/滑石粉復合體系形態及力學性能的影響[J].高分子材料科學與工程,2012,28(11):109-112.
[177]曹博,羅珊珊,楊志,沈佳斌,郭少云.TGIC對PBT/POE共混復合材料斷裂韌性的影響研究[J].太原科技大學學報,2012,33(05):367-370.
[178]陳光順,卓婕,郭少云,李光憲.自制環保穩定劑在增塑PVC制品中應用性能的評價[J].聚氯乙烯,2012,40(08):24-26.
[179]孫彥紅,皮紅,郭少云.聚氯乙烯薄膜使用壽命預測[J].高分子材料科學與工程,2012,28(08):133-136.
[180]喻琴,萬芬,高萬里,李姜,郭少云.層狀PPGr/PP復合材料的結構和電磁屏蔽性能[J].高分子材料科學與工程,2012,28(08):30-33.
[181]楊卓,鄒嘉佳,陳光順,郭少云,李光憲.無機填料對PVC/CPE/CB復合材料導電性能的影響[J].高分子材料科學與工程,2012,28(07):60-63.
[182]熊英,付寶強,郭少云,蘆忠.丁腈橡膠應力加速老化行為的研究[J].裝備環境工程,2012,9(03):52-55.
[183]李環,李佳麗,吳宏,郭少云,蘆忠.磷酸鹽玻璃/聚丙烯復合體系的相容性[J].高分子材料科學與工程,2012,28(04):81-83+87.
[184]萬芬,孫小杰,喻琴,陳凡,李姜,郭少云.多級拉伸PP/(PA1010+CB)復合材料的相形態演變[J].高分子材料科學與工程,2012,28(02):84-86+91.
2011年：
[185]Zou J, Su L, You F, Chen G, Guo S. Dynamic Rheological Behavior and Microcrystalline Structure of Dioctyl Phthalate Plasticized Poly(vinyl chloride). Journal of Applied Polymer Science. 2011;121(3):1725-1733.
[186]Zhang X, Pi H, Guo S. The Mechanism for Inorganic Fillers Accelerating and Inhibiting the UV Irradiation Aging Behaviors of Rigid Poly(vinyl chloride). Journal of Applied Polymer Science. 2011;122(5):2869-2875.
[187]Yi C, Sun Y, Pi H, Guo S. Low-Temperature UV Irradiation Induced the Color Change Kinetics and the Corresponding Structure Development of PVC Film. Journal of Applied Polymer Science. 2011;122(4):2588-2593.
[188]Wei L, Li J, Guo S, Xin M, Tian Y, Zhang F. Effect of Ultrasound on the Processability and Mechanical Properties of Poly(butylene terephthalate)/Talc Composites. Journal of Applied Polymer Science. 2011;122(4):2708-2714.
[189]Wang X, You F, Zhang FS, Li J, Guo S. Experimental and Theoretic Studies on Sound Transmission Loss of Laminated Mica-Filled Poly(vinyl chloride) Composites. Journal of Applied Polymer Science. 2011;122(2):1427-1433.
[190]Shen J, Wang M, Li J, Guo S. In situ fibrillation of polyamide 6 in isotactic polypropylene occurring in the laminating-multiplying die. Polymers for Advanced Technologies. 2011;22(2):237-245.
[191]Peng B, Wu H, Bao W, Guo S, Chen Y, Huang H, et al. Effects of ultrasound on the morphology and properties of propylene-based plastomer/nanosilica composites. Polymer Journal. 2011;43(1):91-96.
[192]Chen X, Yu J, Luo Z, Guo S, He M, Zhou Z. Study on mechanical properties and phase morphology of polypropylene/polyolefin elastomer/magnesium hydroxide ternary composites. Polymers for Advanced Technologies. 2011;22(5):657-663.
[193]孫彥紅,易傳斌,皮紅,郭少云.有機高分子材料使用壽命預測方法[J].高分子通報,2011(12):128-132.
[194]戴瑩瑩,李姜,郭少云.兩步法制備HDPE/PA6復合材料的結構和阻隔性能[J].高分子材料科學與工程,2011,27(08):106-108+112.
[195]李佳麗,鄧俊杰,吳宏,郭少云.磷酸鹽玻璃/聚丙烯復合材料的結晶行為和力學性能[J].復合材料學報,2011,28(06):28-32.
[196]孫小杰,喻琴,高勝玲,李姜,郭少云.多級拉伸PP/PA1010/CB導電復合材料的結構與性能[J].高分子材料科學與工程,2011,27(07):125-128.
[197]張先龍,蔣根杰,吳宏,郭少云.SMA/PA6界面化學反應的流變學測試[J].高分子材料科學與工程,2011,27(06):122-125.
[198]游峰,鄒嘉佳,楊卓,陳光順,郭少云.采用力化學方法制備新型抗沖母料增韌改性PVC[J].聚氯乙烯,2011,39(04):26-29.
[199]鄧俊杰,李佳麗,徐康茗,吳宏,郭少云.聚苯醚無鹵阻燃電線電纜專用料的性能[J].高分子材料科學與工程,2011,27(04):102-105.
2010年：
[200]Zhang X, Zhao T, Pi H, Guo S. Mechanochemical Preparation of a Novel Polymeric Photostabilizer for Poly(vinyl chloride). Journal of Applied Polymer Science. 2010;116(5):3079-3086.
[201]Ye X, Pi H, Guo S. A Novel Route for Preparation of PVC Sheets with High UV Irradiation Resistance. Journal of Applied Polymer Science. 2010;117(5):2899-2906.
[202]Yan B, Wu H, Jiang G, Guo S, Huang J. Interfacial Crystalline Structures in Injection Over-Molded Polypropylene and Bond Strength. Acs Applied Materials & Interfaces. 2010;2(11):3023-3036.
[203]Xie T, Wu H, Bao W, Guo S, Chen Y, Huang H, et al. Enhanced Compatibility of PA6/POE Blends by POE-g-MAH Prepared Through Ultrasound-Assisted Extrusion. Journal of Applied Polymer Science. 2010;118(3):1846-1852.
[204]Wu H, Bao W, Guo S. Enhanced Flow Behaviors of Metallocene-Catalyzed Linear Low-Density Polyethylene During Ultrasound-Assisted Extrusion. Polymer Engineering and Science. 2010;50(11):2229-2235.
[205]Pi H, Chen S, Guo S. MICROSTRUCTURE AND PROPERTIES DEVELOPMENT OF THERMALLY STABILIZED PVC DURING PHOTOAGEING. Acta Polymerica Sinica. 2010(6):660-665.
[206]Lin C, Wang S, Sun H, Li J, Guo S. Real-Time Ultrasonic Characterization of the Chain Orientation of High Density Polyethylene Melts during Processing. Polymer Engineering and Science. 2010;50(6):1140-1150.
[207]Lin C, Sun H, Wang S, Huang J, Li J, Guo S. In-Process Ultrasonic Measurements of Orientation and Disorientation Relaxation of High-Density Polyethylene/Polyamide-6 Composites with Compatibilizer. Journal of Applied Polymer Science. 2010;116(1):320-327.
[208]Jiang G, Wu H, Yan B, Guo S. Effect of a Tie Film on the Enhanced Interfacial Adhesion Between Polyethylene and Polyamide-6 in a Sequential Injection Molding. Polymer Engineering and Science. 2010;50(4):719-729.
[209]Du Q, Jiang G, Li J, Guo S. Adhesion and Delamination Failure Mechanisms in Alternating Layered Polyamide and Polyethylene With Compatibilizer. Polymer Engineering and Science. 2010;50(6):1111-1121.
[210]Chen R, Yi C, Wu H, Guo S. Degradation kinetics and molecular structure development of hydroxyethyl cellulose under the solid state mechanochemical treatment. Carbohydrate Polymers. 2010;81(2):188-195.
[211]Jiang G, Wu H, Guo S. Reinforcement of Adhesion and Development of Morphology at Polymer-Polymer Interface via Reactive Compatibilization: A Review. Polymer Engineering and Science. 2010;50(12):2273-2286.
[212]鄒嘉佳,蘇琳,游峰,楊卓,陳光順,郭少云.加工過程中PVC顆粒形態的演變及凝膠化[J].高分子材料科學與工程,2010,26(11):107-110.
[213]閻博文,蔣根杰,黃建,吳宏,郭少云.溫度對二次注射成型聚丙烯連接界面形態與性能的影響[J].高分子材料科學與工程,2010,26(10):112-114.
[214]李婷,熊英,李姜,郭少云.微層共擠出PP/EVOH共混物的阻隔性能[J].高分子材料科學與工程,2010,26(08):105-108.
[215]黃建,閻博文,蔣根杰,吳宏,郭少云.二次注塑成型尼龍6的界面結晶行為及其對界面強度的影響[J].高分子材料科學與工程,2010,26(07):97-100+104.
[216]皮紅,陳深情,郭少云.熱穩定劑對PVC紫外光老化過程中微觀結構及宏觀性能演變的影響[J].高分子學報,2010(06):660-665.
[217]蘇琳,鄒嘉佳,游峰,鄧俊杰,陳光順,郭少云.木粉表面改性對聚氯乙烯/木粉復合材料性能的影響[J].高分子材料科學與工程,2010,26(02):58-61.
[218]郭梅,熊英,徐鵬,郭少云.PET光散射薄膜的微觀形態調控與光學性能[J].高分子材料科學與工程,2010,26(02):54-57.
2009年：
[219]Zhao L, Sun Z, Tatibouet J, Guo S. Ultrasonic Characterization of the Crystallization Behavior of Poly(ethylene terephthalate). Journal of Applied Polymer Science. 2009;114(5):2731-2739.
[220]Yu X, Wu H, Li J, Guo S, Qiu J. Structure and Property of Injection-Molded Polypropylene Along the Flow Direction. Polymer Engineering and Science. 2009;49(4):703-712.
[221]Wang M, Comrie JE, Bai Y, He X, Guo S, Huck WTS. Formation of Hierarchically Structured Thin Films. Advanced Functional Materials. 2009;19(14):2236-2243.
[222]Shen J, Wang M, Li J, Guo S, Xu S, Zhang Y, et al. Simulation of mechanical properties of multilayered propylene-ethylene copolymer/ethylene 1-octene copolymer composites by equivalent box model and its experimental verification. European Polymer Journal. 2009;45(11):3267-3279.
[223]Li T, Li J, Zhang Y, Du Q, Guo S. STRUCTURE AND PROPERTIES OF (PP plus EVOH)/PP BARRIER MATERIAL PREPARED BY MICROLAYER COEXTRUSION. Acta Polymerica Sinica. 2009(12):1226-1231.
[224]Jiang G, Wu H, Yan B, Guo S, Huang J. Reinforcement of Solid-Melt Interfaces for Semicrystalline Polymers in a Sequential Two-Staged Injection Molding Process. Journal of Polymer Science Part B-Polymer Physics. 2009;47(11):1112-1124.
[225]Jiang G, Wu H, Xie T, Guo S. Improved Processing Behaviors and Mechanical Properties of Polyolefin Elastomer Blends Prepared by Ultrasound-Assisted Extrusion. Journal of Applied Polymer Science. 2009;112(4):2136-2142.
[226]Chen X, Yu J, Luo Z, Hu S, Zhou Z, Guo S, et al. Kinetics of thermo-oxidative degradation of zinc borate/microcapsulated red phosphorus with magnesium hydroxide in flame retarded polypropylene composites. Journal of Polymer Research. 2009;16(6):745-753.
[227]Chen X, Yu J, Lu S, Wu H, Guo S, Luo Z. Combustion Characteristics of Polypropylene/Magnesium Hydroxide/Expandable Graphite Composites. Journal of Macromolecular Science Part B-Physics. 2009;48(6):1081-1092.
[228]Chen X, Yu J, Guo S, Luo Z, He M. Effects of Magnesium Hydroxide and Its Surface Modification on Crystallization and Rheological Behaviors of Polypropylene. Polymer Composites. 2009;30(7):941-947.
[229]Chen X, Yu J, Guo S, Lu S, Luo Z, He M. Surface modification of magnesium hydroxide and its application in flame retardant polypropylene composites. Journal of Materials Science. 2009;44(5):1324-1332.
[230]Chen R, Yi C, Wu H, Guo S. Solid State Mechano-Chemical Grafting Copolymerization of Hydroxyethyl Cellulose with Acrylic Acid. Journal of Applied Polymer Science. 2009;112(6):3537-3542.
[231]Chen G, Yang B, Guo S. Ethylene-Acrylic Acid Copolymer Induced Electrical Conductivity Improvements and Dynamic Rheological Behavior Changes of Polypropylene/Carbon Black Composites. Journal of Polymer Science Part B-Polymer Physics. 2009;47(18):1762-1771.
[232]Chen G, Yang B, Guo S. Nylon 6 Induced Morphological Developments and Electrical Conductivity Improvements of Polypropylene/Carbon Black Composites. Journal of Applied Polymer Science. 2009;114(3):1848-1855.
[233]Chen X, Yu J, He M, Guo S, Luo Z, Lu S. Effects of zinc borate and microcapsulated red phosphorus on mechanical properties and flame retardancy of polypropylene/magnesium hydroxide composites. Journal of Polymer Research. 2009;16(4):357-362.
[234]許家友,郭少云. 馬來酸酐改善聚氯乙烯色澤的機理研究[J]. 廣州大學學報(自然科學版),2009,02:57-59.
[235]熊雷,鄧志偉,陳光順,郭少云. 聚氯乙烯/α-甲基苯乙烯-丙烯腈共混體系的相容性和性能研究[J]. 高分子通報,2009,06:54-58.
[236]李婷,李姜,張玉清,杜芹,郭少云.微層共擠出(PP+EVOH)/PP阻隔材料的結構與性能研究[J].高分子學報,2009(12):1226-1231.
[237]李姜,郭少云,李婷,杜芹.交替微層高分子復合材料的阻隔性能與結構[J].武漢理工大學學報,2009,31(21):25-27.
[238]李姜,文明,李家麗,孫小杰,郭少云.聚丙烯/碳納米管微層擠出材料結構與性能[J].武漢理工大學學報,2009,31(21):56-58+65.
[239]閻博文,黃建,蔣根杰,吳宏,郭少云.二次注射成型聚丙烯中剪切誘導連接界面的形態演變[J].高分子通報,2009(11):32-36.
[240]文明,許雙喜,李婷,李姜,郭少云.交替微層結構PPCB/PP導電復合材料的結構與性能[J].高分子材料科學與工程,2009,25(11):41-44.
[241]陳蓉,易傳斌,吳宏,郭少云.順丁烯二酸酐固相接枝羥乙基纖維素的制備與性能[J].高分子材料科學與工程,2009,25(10):132-134+138.
[242]張玉清,戴瑩瑩,李姜,郭少云.交替層狀結構氯化丁基橡膠/三元乙丙橡膠復合材料的阻尼性能[J].合成橡膠工業,2009,32(05):383-386.
[243]張曉飛,皮紅,郭少云.汞燈紫外光源的強度分布分析及其對PVC老化作用的研究[J].塑料工業,2009,37(08):74-77.
[244]楊波,陳光順,李姜,郭少云.多壁碳納米管增強炭黑/聚丙烯導電復合材料導電行為[J].復合材料學報,2009,26(04):41-46.
[245]蔣松霖,李姜,郭少云.交替多層TPU/SEBS復合材料阻尼隔聲性能的研究[J].廣州化工,2009,37(05):69-71.
[246]付勰,皮紅,郭少云.PVC/TiO2共混物界面的力化學改性研究[J].塑料工業,2009,37(07):54-57.
[247]陳曉浪,于杰,何敏,郭少云,魯圣軍,胡智,周祚萬.表面改性劑對聚丙烯/氫氧化鎂復合材料燃燒性能和熱穩定性及結晶行為的影響[J].高分子材料科學與工程,2009,25(05):60-63.
[248]皮紅,陳深情,郭少云.強紫外光作用下PVC/增韌劑體系結構與性能的演變[J].高等學�；瘜W學報,2009,30(05):1029-1034.
[249]鄧志偉,熊雷,李佳麗,陳光順,郭少云.滑石粉粒徑對PVC/滑石粉復合材料力學性能和熱膨脹系數的影響[J].高分子材料科學與工程,2009,25(04):77-80.
[250]林聰妹,余小峰,吳宏,郭少云.聚乙烯管材專用料的結構與性能[J].高分子材料科學與工程,2009,25(03):78-81.
2008年：
[251]Zhao L, Sun Z, Guo S. A real-time ultrasonic technique for viscosity monitoring during polymer processing. In: Co A, Leal LG, Colby RH, Giacomin AJ, editors. Xvth International Congress on Rheology - the Society of Rheology 80th Annual Meeting, Pts 1 and 2, vol. 10272008. p. 1217-1219.
[252]Xu S, Wen M, Li J, Guo S, Wang M, Du Q, et al. Structure and properties of electrically conducting composites consisting of alternating layers of pure polypropylene and polypropylene with a carbon black filler. Polymer. 2008;49(22):4861-4870.
[253]Xiong Y, Chen G, Guo S. Solid mechanochemical preparation of core-shell SiO2 particles and their improvement on the mechanical properties of PVC composites. Journal of Polymer Science Part B-Polymer Physics. 2008;46(10):938-948.
[254]Chen X, Yu J, Guo S, Luo Z, He M. Flammability and thermal oxidative degradation kinetics of magnesium hydroxide and expandable graphite flame retarded polypropylene composites. Journal of Macromolecular Science Part a-Pure and Applied Chemistry. 2008;45(9):712-720.
[255]Chen X, Wu H, Yu J, Guo S, Luo Z. Maleic Anhydride/Styrene Melt Grafting and Crosslinking onto Ethylene-Octene Copolymer. Polymer Engineering and Science. 2008;48(12):2289-2296.
[256]王明,郭少云. 微納多層功能復合材料的制備新技術[J]. 工程塑料應用,2008,11:83-87.
[257]付勰,皮紅,郭少云.PVC材料抗紫外老化研究進展[J].聚氯乙烯,2008(10):1-5+37.
[258]孫偉,陳光順,郭少云.硬脂酸鹽復合物的形成及對聚氯乙烯的熱穩定化作用[J].高分子材料科學與工程,2008(10):87-90.
[259]皮紅,楊濤,張風順,郭少云,周登義.CPVC/PVC與CPVC/ABS合金加工性能研究[J].塑料工業,2008(08):33-35+39.
[260]朱志鵬,皮紅,郭少云,李光憲.應力作用下硬質聚氯乙烯的紫外光老化機理[J].高分子材料科學與工程,2008(08):93-96.
[261]杜芹,郭少云,李姜,王明,沈佳斌,許雙喜,蔣松霖,陳蓉.高密度聚乙烯/尼龍6共混物的形態結構對其性能的影響[J].高分子材料科學與工程,2008(06):88-91.
[262]孫偉,陳光順,郭少云.納米水滑石對PVC熱穩定性能的影響研究[J].塑料工業,2008(03):58-60+64.
[263]謝婷亭,吳宏,郭少云.超聲擠出POE的加工流變行為[J].合成樹脂及塑料,2008,25(02):50-52+61.
[264]朱志鵬,皮紅,郭少云,李光憲.應力作用下高分子材料的老化行為研究[J].聚氯乙烯,2008(02):6-9+26.
2007年：
[265]Zhao L, Du Q, Jiang G, Guo S. Attapulgite and ultrasonic oscillation induced crystallization behavior of polypropylene. Journal of Polymer Science Part B-Polymer Physics. 2007;45(16):2300-2308.
[266]Wu H, Sun X, Li Z, Guo S. Effect of interfacial structure on crystallization behavior of polypropylene/polyolefin elastomer/barium sulfate ternary composites. Journal of Macromolecular Science Part B-Physics. 2007;46(2):329-339.
[267]Shen J, Wang M, Li J, Du Q, Xu S, Chen G,Guo S, et al. Study on the mechanical properties of propylene-ethylene copolymer/ethylene-1-octene copolymer stratified composites. Acta Polymerica Sinica. 2007(9):827-832.
[268]Qiu J, Tsuboi A, Izumi K, Wu H, Guo S, Huang Y. Effects of interfacial morphology on the welding strength of injection-molded polyamide. Polymer Engineering and Science. 2007;47(12):2164-2171.
[269]Peng B, Wu H, Guo S, Lai S-Y, Jow J. Static ultrasonic oscillations induced degradation and its effect on the linear rheological behavior of novel propylene based plastomer melts. Polymer Degradation and Stability. 2007;92(8):1632-1639.
[270]Peng B, Wu H, Guo S, Lai S-Y, Jow J. Effects of ultrasonic oscillations on rheological behavior and mechanical properties of novel propylene-based plastomers. Journal of Applied Polymer Science. 2007;106(3):1725-1732.
[271]Li J, Zhao L, Guo S. Ultrasound assisted development of structure and properties of polyamide 6/montmorillonite nanocomposites. Journal of Macromolecular Science Part B-Physics. 2007;46(3):423-439.
[272]Li J, Yu X, Guo S. Development of morphology and properties of injection-molded bars of HDPE/PA6 blends along flow direction. Journal of Polymer Science Part B-Polymer Physics. 2007;45(2):184-195.
[273]Jiang G, Wu H, Guo S. A study on compatibility and properties of POE/PS/SEBS ternary blends. Journal of Macromolecular Science Part B-Physics. 2007;46(3):533-545.
[274]Chen X, Yu J, Guo S. Thermal oxidative degradation kinetics of PP and PP/Mg (OH)(2) flame-retardant composites. Journal of Applied Polymer Science. 2007;103(3):1978-1984.
[275]Chen X, Wu H, Luo Z, Yang B, Guo S, Yu J. Synergistic effects of expandable graphite with magnesium hydroxide on the flame retardancy and thermal properties of polypropylene. Polymer Engineering and Science. 2007;47(11):1756-1760.
[276]Li J, Jiang GJ, Guo SY, Zhao LJ. Effects of ultrasonic oscillations on structure and properties of HDPE/montmorillonite nanocomposites. Plast Rubber Compos. 2007;36(7-8):308-313.
[277]王明,沈佳斌,杜芹,許雙喜,李姜,陳光順,郭少云.EPDM/PS交替多層復合材料的力學性能分析[J].復合材料學報,2007(06):36-43.
[278]沈佳斌,王明,李姜,杜芹,許雙喜,陳光順,郭少云.丙烯-乙烯共聚物/乙烯-1-辛烯共聚物層狀復合材料的力學性能研究[J].高分子學報,2007(09):827-832.
[279]楊波,林聰妹,陳光順,郭少云.導電炭黑在聚丙烯/極性聚合物體系中的選擇性分散及其對導電性能的影響[J].功能高分子學報,2007(03):231-236.
[280]楊波,陳曉浪,陳光順,郭少云.導電炭黑填充PP-EAA復合材料的形態及電性能[J].復合材料學報,2007(03):78-83.
[281]蔣根杰,付丹,吳宏,郭少云.乙烯-辛烯共聚物/再生丁基橡膠熱塑性彈性體的制備及其性能[J].合成橡膠工業,2007(03):187-190.
[282]陳曉浪,郭少云,于杰,羅筑,楊紅軍.氫氧化鎂的改性及其填充聚丙烯復合材料的燃燒性能和結晶行為的研究[J].功能材料,2007(04):676-679.
[283]陳深情,熊雷,皮紅,陳光順,郭少云.熱穩定劑對PVC抑煙作用及其機理研究[J].高分子材料科學與工程,2007(02):206-210.
[284]彭波,郭少云.超聲波降解對丙烯基塑性體性能的影響[J].合成樹脂及塑料,2007(02):45-48.
[285]許家友,郭少云.馬來酸酐對PVC/CaCO_3力學性能的影響[J].塑料制造,2007(Z1):66-69.
2006年：
[286]Zhao LJ, Li J, Guo SY, Du Q. Ultrasonic oscillations induced morphology and property development of polypropylene/montmorillonite nanocomposites. Polymer. 2006;47(7):2460-2469.
[287]Yu X, Lu C, Wu H, Guo S. Effect of ultrasonic oscillations on weld line strength of PS, PMMA, and their blends. Journal of Applied Polymer Science. 2006;102(3):2990-2997.
[288]Xiong Y, Chen G, Guo S. The preparation of core-shell CaCO3 particles and its effect on mechanical property of PVC composites. Journal of Applied Polymer Science. 2006;102(2):1084-1091.
[289]Wang M, Xu J, Wu H, Guo S. Effect of pentaerythritol and organic tin with calcium/zinc stearates on the stabilization of poly(vinyl chloride). Polymer Degradation and Stability. 2006;91(9):2101-2109.
[290]Lu C, Yu XF, Guo SY. The mechanism of ultrasonic improvement of weld line strength of injection molded polystyrene and polystyrene/polyethylene blend parts. Journal of Polymer Science Part B-Polymer Physics. 2006;44(10):1520-1530.
[291]Li YT, Chen GS, Guo SY, Li HL. Studies on rheological behavior and structure development of high-density polyethylene in the presence of ultrasonic oscillations during extrusion. Journal of Macromolecular Science-Physics. 2006;B45(1):39-52.
[292]Li J, Guo SY, Liang M. Effects of ultrasonic oscillation on processing behaviors of PS, EPDM, and PS/EPDM blend. Journal of Applied Polymer Science. 2006;100(3):1856-1863.
[293]Chen X, Yu J, Guo S. Structure and properties of polypropylene composites filled with magnesium hydroxide. Journal of Applied Polymer Science. 2006;102(5):4943-4951.
[294]Chen G, Tian M, Guo S. A study on the morphology and mechanical properties of PVC/nano-SiO2 composites. Journal of Macromolecular Science Part B-Physics. 2006;45(5):709-725.
[295]孫曉嵐,李震,郭少云.PP／POE／BaSO_4三元復合體系力學性能研究[J].現代塑料加工應用,2006(06):22-25.
[296]彭波,郭少云,劉志明.超聲擠出DP/納米SiO_2復合材料的拉伸與流變性能[J].塑料,2006(06):20-23.
[297]趙麗娟,杜芹,郭少云,李姜.超聲擠出制備聚丙烯/納米碳酸鈣復合材料及其結晶和分散形態[J].高分子材料科學與工程,2006(06):184-187.
[298]陳曉浪,于杰,郭少云,曹新鑫,薛濤,胡智.表面改性對聚丙烯/納米氫氧化鎂復合材料性能的影響[J].高分子材料科學與工程,2006(05):170-174.
[299]許家友,王明,郭少云.一種Ca/Zn/Sn復合穩定劑及其性能的研究[J].聚氯乙烯,2006(09):20-22+44.
[300]李彩林,郭少云,陳躍.高抗沖聚丙烯復合材料的研究[J].工程塑料應用,2006(09):15-19.
[301]李光照,石亮,郭少云.PVC-U/蒙脫土復合材料的制備與力學性能研究[J].塑料,2006(04):46-49+6.
[302]皮紅,周詩雨,郭少云.氯化聚氯乙烯的增韌改性[J].高分子材料科學與工程,2006(04):110-113.
[303]許家友,郭少云.沸石對PVC阻燃抑煙作用的研究[J].聚氯乙烯,2006(06):22-25.
[304]孫曉嵐,李震,郭少云.PP/POE/BaSO_4三元復合體系界面相互作用與拉伸斷裂形態研究[J].江蘇工業學院學報,2006(02):5-9.
[305]李彩林,郭少云,陳躍,李石磊.PP/POE/滑石粉三元復合材料的研究[J].高分子材料科學與工程,2006(03):214-218.
2005年：
[306]Wu H, Guo SY, Zhen L. Effects of ultrasonic oscillations on linear viscoelastic behaviors of metal locene-catalyzed linear low density polyethylene and its blends with low density polyethylene. Journal of Polymer Science Part B-Polymer Physics. 2005;43(21):3030-3043.
[307]Wu H, Guo SY, Li Z. Molecular structure development of metallocene-catalyzed linear low density polyethylene under ultrasonic irradiation. Journal of Polymer Science Part B-Polymer Physics. 2005;43(15):2121-2129.
[308]Tian MH, Chen GS, Guo SY. Effect of high-energy vibromilling on interfacial interaction and mechanical properties of PVC/nano-CaCO3 composites. Macromolecular Materials and Engineering. 2005;290(9):927-932.
[309]Pi H, Xiong Y, Guo SY. The kinetic studies of elimination of HCl during thermal decomposition of PVC in the presence of transition metal oxides. Polymer-Plastics Technology and Engineering. 2005;44(2):275-288.
[310]Lu C, Yu XF, Guo SY. Ultrasonic improvement of weld line strength of injection-molded polystyrene and polystyrene/polyethylene blend parts. Polymer Engineering and Science. 2005;45(12):1666-1672.
[311]Li YT, Li J, Guo SY, Li HL. Mechanochemical degradation kinetics of high-density polyethylene melt and its mechanism in the presence of ultrasonic irradiation. Ultrasonics Sonochemistry. 2005;12(3):183-189.
[312]Li YT, Chen GS, Guo SY, Li HL. Effect of ultrasonic oscillations on the rheological behavior and morphology of illite-filled high-density polyethylene composites. Journal of Applied Polymer Science. 2005;96(2):379-384.
[313]Li J, Zhao LJ, Guo SY. Ultrasonic preparation of polymer/layered silicate nanocomposites during extrusion. Polymer Bulletin. 2005;55(3):217-223.
[314]Li J, Liang M, Guo SY, Kuthanova V, Hausnerova B. Linear viscoelastic properties of high-density polyethylene/polyarnide-6 blends extruded in the presence of ultrasonic oscillations. Journal of Polymer Science Part B-Polymer Physics. 2005;43(10):1260-1269.
[315]Li J, Guo SY, Li XN. Degradation kinetics of polystyrene and EPDM melts under ultrasonic irradiation. Polymer Degradation and Stability. 2005;89(1):6-14.
[316]Li J, Guo SY, Slezak R, Hausnerova B. In situ compatibilization of PS/EPDM blends during ultrasonic extrusion. Macromolecular Chemistry and Physics. 2005;206(24):2429-2439.
[317]陳曉浪,于杰,羅筑,何敏,郭少云.ABS/PBT共混合金體系的研制[J].四川大學學報(工程科學版),2005(04):69-72.
[318]陳曉浪,羅筑,于杰,譚紅,陳興江,郭少云.ABS/PBT/彈性體三元共混合金的研究[J].塑料工業,2005(06):16-18.
[319]許家友,余曉峰,李光照,郭少云.水滑石填充PVC形態結構的研究[J].塑料工業,2005(06):45-47.
[320]許家友,郭少云.季戊四醇對PVC/鈣鋅穩定體系的熱穩定化機理[J].高分子材料科學與工程,2005(03):148-151.
[321]皮紅,郭少云.過渡金屬氧化物對PVC抑煙機理的ESCA研究[J].高分子材料科學與工程,2005(03):164-168.
[322]許家友,郭少云,吳煒來.硬脂酸鈣-硬脂酸鋅復合物的形成及對聚氯乙烯的穩定化作用[J].高分子材料科學與工程,2005(02):241-244.
[323]李姜,梁梅,林影,郭少云.超聲技術在高分子材料中應用研究進展[J].應用聲學,2005(01):53-58.
[324]熊英,陳光順,郭少云,朱莉.力化學處理納米CaCO_3/ACR復合粒子對PVC力學性能的影響[J].聚氯乙烯,2005(01):13-18.
[325]陸昶,文力,郭少云.尼龍6/聚苯乙烯共混物融合縫的形態及其對力學性能的影響[J].高分子材料科學與工程,2005(01):172-175.
2004年：
[326]Wu H, Guo SY, Chen GS, Shi HG. Effects of ultrasonic oscillations on processing behavior and mechanical properties of metallocene-catalyzed linear low-density polyethylene/low-density polyethylene blends. Journal of Applied Polymer Science. 2004;94(6):2522-2527.
[327]Wu H, Guo SY, Chen GS, Chen W, Wang HT. Effect of the material of construction of die on processing behavior of metallocene-catalyzed linear low density polyethylene. Polymer-Plastics Technology and Engineering. 2004;43(1):17-30.
[328]Lu C, Guo SY, Wen L, Wang JY. Weld line morphology and strength of polystyrene/polyamide-6/poly(styrene-co-maleic anhydride) blends. European Polymer Journal. 2004;40(11):2565-2572.
[329]Li J, Liang M, Guo SY, Lin Y. Studies on chain scission and extension of polyamide 6 melt in the presence of ultrasonic irradiation. Polymer Degradation and Stability. 2004;86(2):323-329.
[330]Guo SY, Ait-Kadi A, Bousmina A. A modified model predictions and experimental results of weld-line strength in injection molded PS/PMMA blends. Polymer. 2004;45(9):2911-2920.
[331]Chen GS, Guo SY, Li YT. Dynamic rheological properties of high-density polyethylene/polystyrene blends extruded in the presence of ultrasonic oscillations. Journal of Applied Polymer Science. 2004;92(5):3153-3158.
[332]熊英,陳光順,郭少云,陸小華.聚氯乙烯/鈦酸鉀晶須復合材料性能的研究[J].塑料工業,2004(07):32-35.
[333]皮紅,郭少云.PVC/阻燃抑煙劑體系的力化學改性[J].高分子材料科學與工程,2004(04):156-159.
[334]熊英,陳光順,郭少云.聚氯乙烯增韌改性研究進展[J].聚氯乙烯,2004(02):1-5+10.
[335]梁梅,李姜,郭少云,林影.超聲波對PA6/HDPE共混體系結構和性能的影響[J].高分子材料科學與工程,2004(02):126-129.
[336]許家友,郭少云.聚氯乙烯用Ca/Zn熱穩定劑的研究概況[J].聚氯乙烯,2004(01):40-42.
2003年：
[337]Wu H, Guo SY, Chen GS, Lin J, Chen W, Wang HT. Ultrasonic oscillations effect on rheological and processing properties of metallocene-catalyzed linear low density polyethylene. Journal of Applied Polymer Science. 2003;90(7):1873-1878.
[338]Pi H, Guo SY, Ning Y. Mechanochemical improvement of the flame-retardant and mechanical properties of zinc borate and zinc borate - Aluminum trihydrate-filled poly(vinyl chloride). Journal of Applied Polymer Science. 2003;89(3):753-762.
[339]Li Z, Guo SY, Song WT, Hou B. Effect of interfacial interaction on morphology and mechanical properties of PP/POE/BaSO4 ternary composites. Journal of Materials Science. 2003;38(8):1793-1802.
[340]Guo SY, Wu H, Chen GS, Chen XR. Effect of high-energy vibro-milling of filler on the mechanical properties of filled high-density polyethylene. Polymer Composites. 2003;24(3):456-463.
[341]Guo SY, Li YT, Chen GS, Li HL. Ultrasonic improvement of rheological and processing behaviour of LLDPE during extrusion. Polymer International. 2003;52(1):68-73.
[342]許家友,郭少云,羅朝萬,代慶湘,趙大鉀.一種耐溫抗鹽堵劑的組成及性能研究[J].油田化學,2003(04):313-315.
[343]田滿紅,郭少云.納米CaCO_3填充PVC復合材料的力化學增強增韌研究[J].聚氯乙烯,2003(06):22-25.
[344]文力,李震,郭少云.EAA對PP/POE/伊利石體系的反應增容作用[J].塑料工業,2003(06):9-12.
[345]李震,郭少云,宋文韜.PP/POE/BaSO_4共混體系界面相互作用表征與拉伸斷裂形態研究[J].高分子材料科學與工程,2003(02):190-193+198.
[346]田滿紅,郭少云.納米SiO_2增強增韌聚氯乙烯復合材料的研究[J].聚氯乙烯,2003(01):26-29+32.
2002年：
[347]Li Z, Guo SY, Song WT, Yan Y. Effect of the interfacial interaction on the phase structure and rheological behavior of polypropylene/ethylene-octene copolymer/BaSO4 ternary composites. Journal of Polymer Science Part B-Polymer Physics. 2002;40(17):1804-1812.
[348]Guo SY, Ait-Kadi A. A study on weld line morphology and mechanical strength of injection molded polystyrene/poly(methyl methacrylate) blends. Journal of Applied Polymer Science. 2002;84(10):1856-1865.
[349]Chen GS, Guo SY, Li HL. Ultrasonic improvement of rheological behavior of polystyrene. Journal of Applied Polymer Science. 2002;84(13):2451-2460.
[350]Chen GS, Guo SY, Li HL. Ultrasonic improvement of the compatibility and rheological behavior of high-density polyethylene/polystyrene blends. Journal of Applied Polymer Science. 2002;86(1):23-32.
[351]郭少云.MC100新型聚氯乙烯加工助劑改善聚氯乙烯加工性能和力學性能的研究[J].聚氯乙烯,2002(05):31-34.
2001年：
[352]皮紅,郭少云.PVC阻燃抑煙研究進展[J].聚氯乙烯,2001(04):28-33.
[353]李云濤,郭少云,陳光順,李惠林.超聲輻照下聚乙烯熔體擠出流變特性的研究[J].化學通報,2001(01):40-42.
2000年：
[354]Ning Y, Guo SY. Frame-retardant and smoke-suppressant properties of zinc borate and aluminum trihydrate-filled rigid PVC. Journal of Applied Polymer Science. 2000;77(14):3119-3127.
[355]李云濤,郭少云,陳光順,李惠林.超聲輻照對HDPE分子量分布及拉伸行為的影響[J].塑料工業,2000(01):25-26.
1999年：
[356]Guo SY, Ning Y. A study on properties and morphological structure of ferrocene-filled PVC. Journal of Polymer Science Part B-Polymer Physics. 1999;37(20):2828-2834
[357]李云濤,郭少云,陳光順,李惠林.超聲輻照對HDPE加工及力學性能的影響[J].高分子材料科學與工程,1999(06):142-144.
1997年：
[358]Xu X, Guo SY, Wang ZQ. Effect of mechanochemical degradation on gelation and mechanical properties of PVC. Journal of Applied Polymer Science. 1997;64(12):2273-2281.
[359]郭少云,王澤瓊,馮金茂,徐僖.HDPE/尼龍-6/EAA共混體系反應增容作用的研究[J].高分子材料科學與工程,1997(05):115-119.
[360]郭少云,王澤瓊,黎淳昭,徐僖.硼酸鋅對PVC力學及阻燃性能的影響[J].高分子材料科學與工程,1997(03):100-105.
1996年：
[361]郭少云,王澤瓊,徐僖.在高速氣流粉碎作用下PVC的力化學降解及形態變化的研究[J].高分子材料科學與工程,1996(06):115-118.
1994年：
[362]Guo SY, Xu X. Effect of Mechanochemical Degradation on Rheological Behavior of Pvc. Polymer-Plastics Technology and Engineering. 1994;33(5):605-614.
1993年：
[363]郭少云,徐僖.在應力作用下聚氯乙烯降解的研究[J].高分子材料科學與工程,1993(06):106-110.
1991年：
[364]Guo S, Li H, Xu x. A Study on the Morphology and Properties of IPP/IIR Blends. 高分子科學: 英文版. 1991(3):226-231.
[365]Xu X, Guo SY, Li HL. A Study on Morphology and Properties of Ipp/Zinc-Neutralized Sulfonated Epdm Blends. Polymer-Plastics Technology and Engineering. 1991;30(7):751-760. |
